PK Power AC Adapter Charger for Jebao SW-2 Wave Maker Instruction Manual

Introduction

This manual provides essential instructions for the safe and efficient use of your PK Power AC Adapter Charger, Model BG-20191018-POW57. This adapter is designed to provide power to compatible devices, such as the Jebao SW-2 Marine Aquarium Wireless Wave Maker. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

• Ensure the adapter is used with devices that match its voltage and current requirements.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to strong impacts.
• Do not attempt to open or repair the adapter. Refer all servicing to qualified personnel.
• Unplug the adapter from the power outlet when not in use for extended periods.
• This adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe operation.
• Input voltage range: 100-240V AC, 50-60Hz. Ensure your power outlet matches these specifications.

Package Contents

• 1 x PK Power AC Adapter Charger (Model BG-20191018-POW57)

Setup

1. Verify Compatibility: Before connecting, ensure your device (e.g., Jebao SW-2 Wave Maker) requires the power specifications provided by this adapter. Refer to your device's manual for its power requirements.
2. Connect to Device: Plug the output connector of the AC adapter into the power input port of your compatible device. Ensure a secure connection.
3. Connect to Power Outlet: Insert the AC plug of the adapter into a standard 100-240V wall outlet.
4. The device should now receive power.

Image 1: The PK Power AC Adapter Charger with its integrated power cord and two-prong plug.

Operating Instructions

Once properly connected, the PK Power AC Adapter Charger operates automatically. It provides a stable power supply to your connected device. There are no user-adjustable settings on the adapter itself.

Image 2: A close-up view of the PK Power AC Adapter Charger, highlighting the label with input and output specifications.

Maintenance

• Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter.
• Inspection: Periodically inspect the adapter and its cord for any signs of damage, such as cuts, fraying, or bent prongs. If damage is found, discontinue use and replace the adapter.

Troubleshooting

No Power to Device:

• Check Connections: Ensure the adapter is securely plugged into both the wall outlet and the device.
• Test Outlet: Plug another working appliance into the wall outlet to confirm it is supplying power.
• Verify Device: Ensure the device itself is functioning correctly and is not the source of the issue.
• Inspect Adapter: Check the adapter and its cord for any visible damage. If damaged, do not use.
• Compatibility: Double-check that the adapter's output specifications match your device's power requirements.

If the issue persists after performing these checks, contact customer support.

Specifications

Warranty and Support

This PK Power AC Adapter Charger comes with a 1-year manufacturer warranty. For warranty claims or technical support, please contact PK-Power customer service.

Our friendly and reliable customer service team aims to respond to inquiries within 24 hours. For further assistance, you may visit the PKPOWER Store on Amazon.

Compliance Information

This product is certified to meet the following standards:

• CE: Conforms with European Union health, safety, and environmental protection standards.
• FCC: Complies with Federal Communications Commission regulations for electronic devices.
• RoHS: Restricts the use of hazardous substances in electrical and electronic equipment.