1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Modern Flames Landscape Pro Multi Electric Fireplace, 78-Inch (Model LPM-8016). Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
Image 1.1: The Modern Flames Landscape Pro Multi Electric Fireplace, 78-Inch, showcasing its flame and ember bed effects.
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, read all instructions before using this appliance.
- Always disconnect power before performing any service or maintenance.
- Do not operate any fireplace with a damaged cord or plug, or if the heater has malfunctioned or been dropped/damaged.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not use outdoors.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (Proposition 65 warning).
3. Package Contents
Carefully unpack all components and check against the list below. Ensure all items are present and undamaged before proceeding with installation.
- Modern Flames Landscape Pro Multi Electric Fireplace unit (78-Inch)
- Remote Control
- Power Cord
- Installation Hardware (brackets, screws)
- Decorative Media (e.g., Multi-Log Ember Bed, Fire Glass, Rocks - specific type may vary based on order)
- User Manual (this document)
4. Installation
The Landscape Pro Multi Electric Fireplace offers versatile installation options: single-sided, left/right corner, or three-sided. It supports built-in clean face, partial 2x4 recess, or wall mount configurations.
4.1. Pre-Installation Considerations
- Location: Choose a location away from high traffic areas and where the unit will not be exposed to direct sunlight or drafts.
- Power Supply: Ensure a dedicated 120V, 15 Amp circuit is available for the fireplace.
- Clearances: Maintain proper clearances from combustible materials as specified in the safety section.
- Structural Support: For built-in or wall-mounted installations, ensure the wall structure can support the unit's weight (approximately 360 pounds).
Image 4.1: Product dimensions for the 78-inch model. Dimensions are approximately 11.5"D x 78"W x 25"H.
4.2. Wall Mount Installation
- Carefully remove the front glass panel and decorative media from the unit.
- Locate wall studs for secure mounting.
- Attach the mounting bracket (if separate) to the wall using appropriate hardware, ensuring it is level.
- Lift the fireplace unit and hook it onto the wall mounting bracket.
- Secure the unit to the wall using additional screws through designated mounting holes.
- Install decorative media and reattach the front glass panel.
4.3. Built-in / Recessed Installation
- Construct a framed opening in the wall according to the fireplace dimensions (refer to Image 4.1 for exact measurements). Ensure adequate ventilation space around the unit.
- Route the power supply cable to the opening.
- Carefully slide the fireplace unit into the framed opening.
- Secure the unit to the framing using the provided mounting screws.
- Connect the power cord to the electrical outlet.
- Install decorative media and reattach the front glass panel.
Note: For corner or three-sided configurations, additional framing and finishing may be required. Consult a professional installer if unsure.
5. Operation
Your Modern Flames electric fireplace can be controlled via the included remote control or the Modern Flames mobile application.
5.1. Remote Control
Image 5.1: The included remote control for the electric fireplace.
The remote control allows you to power the unit on/off, adjust flame colors, ember bed colors, accent lighting, and heat settings. Ensure the remote has fresh batteries and is pointed towards the fireplace sensor.
- Power Button: Turns the fireplace on or off.
- Color Wheel: Adjusts the RGB colors for flames, ember bed, and accent lighting.
- Flame Button: Cycles through flame effects and intensity.
- Heat Button: Activates or deactivates the 10,000 BTU ceramic heater. Adjusts heat levels.
- Light Buttons: Controls accent lighting and ember bed brightness.
5.2. Mobile Application Control
Download the Modern Flames app from your device's app store. Follow the in-app instructions to pair your fireplace. The app provides advanced control over flame effects, colors, heat settings, and scheduling features.
Note: An optional wireless thermostatic wall control can also be integrated for additional convenience.
6. Customization
The Landscape Pro Multi offers extensive customization options for its visual effects.
6.1. Flame and Lighting Effects
- High-Intensity RGB Flames: Adjust flame colors and intensity to match your mood or decor.
- Ember Bed Lighting: Customize the color and brightness of the ember bed.
- Accent Lighting: Utilize additional accent lighting features for enhanced ambiance.
Image 6.1: Fireplace with blue flame and ember bed settings.
Image 6.2: Fireplace with orange and green flame effects.
Image 6.3: Fireplace with traditional warm flame effects and log media.
6.2. Decorative Media Options
The fireplace comes with a multi-log ember bed. Additional media options like fire glass and various rock types are available to further personalize your fireplace's appearance.
Image 6.4: Examples of Fire Glass Media Options.
Image 6.5: Examples of Rock Media Options and the Multi-Log Ember Bed.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric fireplace.
- Cleaning:
- Always disconnect power before cleaning.
- Use a soft, damp cloth to clean the exterior surfaces. Do not use abrasive cleaners or sprays.
- For glass panels, use a glass cleaner and a soft, lint-free cloth.
- Periodically vacuum the air intake and exhaust vents to prevent dust buildup.
- Light Bulbs: The LED lighting system is designed for long life and typically does not require replacement. If issues occur, contact customer support.
- Media: The decorative media can be carefully removed and cleaned with a soft brush or damp cloth if dust accumulates.
8. Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | No power, tripped circuit breaker, remote control battery dead. | Check power connection, reset circuit breaker, replace remote control batteries. |
| No heat output. | Heater not activated, thermostat setting too low, air vents blocked. | Ensure heater function is on, increase thermostat setting, clear any obstructions from vents. |
| Flames are not visible or dim. | Flame brightness setting too low, LED issue. | Adjust flame brightness using remote/app. If issue persists, contact support. |
| Remote control is unresponsive. | Batteries dead, obstruction between remote and sensor, remote malfunction. | Replace batteries, ensure clear line of sight to fireplace sensor, try controlling with the app. |
If the problem persists after attempting these solutions, please contact Modern Flames customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Modern Flames |
| Model Name | Landscape Pro Multi (LPM-8016) |
| Product Dimensions | 11.5"D x 78"W x 25"H |
| Item Weight | 360 Pounds |
| Power Source | AC/DC |
| Heat Output | 10,000 British Thermal Units (BTU) |
| Heating Coverage | Up to 800 sq ft |
| Material | Ceramic, Glass |
| Installation Type | Wall Mount, Built-in, Corner |
| Included Components | Fan, LED Light System, Decorative Log Media |
| Control Methods | Remote Control, Mobile Application, Optional Wireless Thermostatic Wall Control |
| UPC | 850011491089 |
10. Warranty and Support
This Modern Flames electric fireplace comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Modern Flames customer support:
- Website: www.modernflames.com (Note: This is a placeholder URL, please refer to your product documentation for the official support website.)
- Phone: Refer to your product documentation for contact numbers.
When contacting support, please have your model number (LPM-8016) and purchase date available.
