TechniSat DIGITRADIO 10 DAB+ Digital Radio Adapter - Instruction Manual

Introduction

This manual provides essential information for the setup, operation, and maintenance of your TechniSat DIGITRADIO 10 DAB+ Digital Radio Adapter. This device is designed to enhance existing stereo systems, AV receivers, or active speakers by adding DAB+ digital radio, FM radio, and Bluetooth audio streaming capabilities. It features an OLED display for clear information and comes with a remote control for convenient operation.

The DIGITRADIO 10 is a receiver unit and does not include its own speakers. It must be connected to an external audio system for sound output.

What's in the Box

Please check the contents of the package to ensure all items are present:

• DIGITRADIO 10 DAB+ Digital Radio Adapter
• DAB/FM Antenna
• Audio Connection Cable (RCA)
• Power Supply Unit
• USB Cable
• Remote Control
• Batteries for Remote Control
• Instruction Manual

The TechniSat DIGITRADIO 10 DAB+ Digital Radio Adapter.

Front view of the TechniSat DIGITRADIO 10 adapter showing the OLED display.

The included remote control for the TechniSat DIGITRADIO 10 adapter.

Setup

1. Power Supply Connection

Connect the provided power supply unit to the 'DC IN 5V 500mA' port on the rear of the DIGITRADIO 10. Plug the power adapter into a suitable wall outlet.

2. Antenna Connection

Attach the DAB/FM antenna to the 'RF IN' port on the back of the adapter. For optimal reception, extend the antenna fully and position it away from other electronic devices.

3. Audio System Connection

Use the audio connection cable (RCA) to connect the 'AUDIO L' and 'AUDIO R' output ports on the DIGITRADIO 10 to the corresponding input ports on your Hi-Fi system, AV receiver, or active speakers.

4. Remote Control Battery Installation

Open the battery compartment on the back of the remote control and insert the supplied batteries, ensuring correct polarity (+/-). Close the compartment securely.

Rear panel of the TechniSat DIGITRADIO 10, showing the RF IN, Audio L/R, and DC IN ports for connections.

Operating Instructions

1. Power On/Off

Press the power button on the remote control or the device to turn the DIGITRADIO 10 on or off. The device will enter standby mode when turned off.

2. DAB+ Radio Reception

Select DAB+ mode using the 'MODE' button on the remote control. The device will automatically scan for available DAB+ stations. Use the navigation buttons (up/down) to browse stations and 'OK' to select.

Graphic illustrating the benefits of DAB+ digital radio, offering noise-free reception and a wide range of stations.

3. FM Radio Reception

Select FM mode using the 'MODE' button. Use the 'SCAN' button to automatically search for FM stations. Manual tuning is also available. Store your favorite stations using the preset buttons.

4. Bluetooth Audio Streaming

Switch to Bluetooth mode. On your smartphone or other Bluetooth-enabled device, search for 'DIGITRADIO 10' and pair. Once connected, you can stream audio wirelessly to the adapter.

A person using a smartphone to stream music via Bluetooth to the adapter.

5. Display Brightness

The brightness of the OLED display can be adjusted for both active operation and standby mode. Refer to the menu settings for options.

6. Alarm Function

The DIGITRADIO 10 includes an alarm function. Set your desired alarm time and source (DAB+, FM) through the device's menu or remote control.

Maintenance

To ensure the longevity and optimal performance of your TechniSat DIGITRADIO 10, follow these simple maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
• Placement: Place the adapter on a stable, flat surface. Avoid areas with excessive heat, humidity, dust, or direct sunlight. Ensure adequate ventilation around the unit.
• Power: Disconnect the power supply from the wall outlet if the device will not be used for an extended period.

Troubleshooting

If you encounter any issues with your DIGITRADIO 10, please refer to the following common problems and solutions:

• No Power: Ensure the power supply is securely connected to both the adapter and a working wall outlet. Check if the outlet is functional.
• No Sound: Verify that the audio connection cable is correctly plugged into both the adapter and your external audio system. Check the volume levels on both the adapter and your audio system. Ensure the correct input source is selected on your audio system.
• Poor DAB+/FM Reception: Fully extend the antenna and try repositioning it. Ensure there are no large metal objects or other electronic devices interfering with the signal. In some areas, an external antenna may be required for better reception.
• Bluetooth Connection Issues: Make sure the adapter is in Bluetooth pairing mode. Ensure Bluetooth is enabled on your external device and it is within range. Try unpairing and re-pairing the devices.
• Remote Control Not Working: Check if the batteries are correctly inserted and not depleted. Ensure there are no obstructions between the remote control and the adapter's sensor.

Specifications

Warranty and Support

The TechniSat DIGITRADIO 10 comes with a 2-year product warranty. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official TechniSat website for detailed contact information and support resources.