Introduction
The TechniSat DIGITRADIO 10 C is a digital radio adapter designed to enhance your existing hi-fi system, AV receiver, or active speakers with modern radio reception and audio streaming capabilities. This compact device provides crystal-clear DAB+ digital radio, FM radio, and Bluetooth audio streaming. It features a 2.8-inch color display for showing time, date, station, and title information, and is controlled via the included remote control.
This manual provides essential information for the setup, operation, and maintenance of your DIGITRADIO 10 C.
Figure 1: Front view of the TechniSat DIGITRADIO 10 C.
Package Contents
Please check that all items are present and undamaged. If any items are missing or damaged, contact your retailer.
- TechniSat DIGITRADIO 10 C unit
- DAB/FM antenna
- Audio connection cable
- Power supply unit
- USB cable
- Remote control
- Batteries for remote control
- Instruction manual (this document)
Figure 2: Included remote control for the DIGITRADIO 10 C.
Setup
Connect the Antenna
Connect the supplied DAB/FM antenna to the RF IN port on the rear of the DIGITRADIO 10 C. Position the antenna for optimal reception.
Connect to your Audio System
Use the audio connection cable to connect the AUDIO L/R outputs on the DIGITRADIO 10 C to an available audio input (e.g., AUX, CD, or Tuner input) on your hi-fi system, AV receiver, or active speakers. Ensure correct left and right channel connections.
Figure 3: Rear connections of the DIGITRADIO 10 C.
Power Connection
Connect the power supply unit to the DC IN 5V 500mA port on the rear of the DIGITRADIO 10 C, then plug the power adapter into a wall outlet.
Initial Power On and Setup
Insert the supplied batteries into the remote control. Press the power button on the remote control to turn on the device. Follow the on-screen prompts on the 2.8-inch color display to select your preferred language and initiate an automatic scan for available DAB+ and FM radio stations.
Operating Instructions
Selecting Operating Mode
Press the MODE button on the remote control to switch between DAB+ radio, FM radio, and Bluetooth modes.
DAB+ Radio
In DAB+ mode, use the navigation buttons (< / >) on the remote control to browse through available stations. The display will show station name, program information, and time.
FM Radio
In FM mode, use the navigation buttons (< / >) to tune to frequencies. Press the SCAN button to perform an automatic scan for FM stations. RDS (Radio Data System) information will be displayed if available.
Bluetooth Audio Streaming
Switch to Bluetooth mode. On your mobile device (smartphone, tablet), enable Bluetooth and search for "DIGITRADIO 10 C". Select it to pair. Once connected, you can stream audio from your device to your hi-fi system through the adapter. Use your mobile device to control playback (play/pause, skip tracks).
Saving Favorite Stations
The DIGITRADIO 10 C allows you to save up to 20 favorite stations for both DAB+ and FM modes. To save a station, tune to the desired station, then press and hold one of the numeric preset buttons (1-20) on the remote control until the display confirms the save. To recall a favorite, simply press the corresponding numeric button.
Display Information
The 2.8-inch color display shows current time, date, station name, and program information (e.g., song title, artist) depending on the broadcast. Use the INFO button on the remote control to cycle through different display information.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners, waxes, or solvents as they may damage the surface.
- Placement: Ensure the device is placed on a stable, flat surface. Avoid direct sunlight, heat sources, and areas with high humidity or dust.
- Antenna Care: Handle the antenna carefully. Do not bend or force it, as this may affect reception quality.
- Battery Replacement: Replace the remote control batteries when they are depleted. Ensure correct polarity when inserting new batteries.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; power outlet faulty. | Check power cable connection; try a different power outlet. |
| No sound | Audio cable not connected; incorrect input selected on hi-fi system; volume too low. | Ensure audio cable is connected correctly; select the correct input on your hi-fi system; increase volume on both the adapter and your hi-fi system. |
| Poor radio reception (DAB+/FM) | Antenna not properly positioned or connected; weak signal in your area. | Adjust antenna position; ensure antenna is securely connected; perform a new station scan. Consider an external antenna if signal remains weak. |
| Bluetooth pairing issues | Device not in pairing mode; Bluetooth disabled on mobile device; too far from adapter. | Ensure adapter is in Bluetooth mode; enable Bluetooth on your mobile device; move mobile device closer to the adapter. |
| Remote control not working | Batteries depleted or incorrectly inserted; obstruction between remote and adapter. | Replace batteries, checking polarity; ensure clear line of sight to the adapter's sensor. |
For more detailed troubleshooting, please refer to the comprehensive manual available on the TechniSat website or contact customer support.
Specifications
- Brand: TechniSat
- Model Number: 0000/3945
- Product Dimensions (LxWxH): 12 x 6 x 9 cm
- Color: Neutral (Black/Silver)
- Tuner Technology: DAB+/DAB, FM
- Connectivity: Bluetooth (for audio streaming reception), AUX (auxiliary), External antenna connection (IEC socket)
- Special Features: DAB+ digital radio, FM radio with RDS, Favorite station memory (20 DAB+, 20 FM), Time and date display, Bluetooth audio streaming
- Compatible Devices: Hi-Fi systems, AV amplifiers, Active speakers
- Power Source: External power supply unit (DC IN 5V 500mA)
- Included Components: DIGITRADIO 10 C unit, DAB/FM antenna, Audio connection cable, Power supply, Remote control, User manual
Warranty and Support
The TechniSat DIGITRADIO 10 C comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or further inquiries, please contact TechniSat customer service or visit the official TechniSat website for detailed support resources and contact information.
