IKEA NÄVLINGE LED Work Lamp User Manual

1. Introduction

The IKEA NÄVLINGE LED Work Lamp is designed to provide focused, directional lighting, ideal for various tasks. Its adjustable arm and head allow for easy light direction, ensuring optimal illumination where needed. Featuring an energy-efficient LED light source, this lamp consumes significantly less energy and offers a longer lifespan compared to traditional incandescent bulbs. Its slim design makes it suitable for placement in compact spaces.

2. Product Features

• Gives directional light that is good for focused lighting.
• Adjustable lamp arm and head for easy light direction.
• LED light source consumes up to 85% less energy.
• LED light source lasts 20 times longer than incandescent bulbs.
• Slim design for easy placement in small spaces.
• Built-in LED light source.

3. Package Contents

The IKEA NÄVLINGE LED Work Lamp package includes:

• 1 x IKEA NÄVLINGE LED Work Lamp unit

4. Setup

The IKEA NÄVLINGE LED Work Lamp requires no assembly. Follow these simple steps to set up your lamp:

1. Carefully remove the lamp from its packaging.
2. Place the lamp on a stable, flat surface, such as a desk or table. Ensure the base is fully supported.
3. Uncoil the power cord and plug it into a standard 120V electrical outlet.
4. Adjust the lamp arm and head to direct the light as desired.

Image: The IKEA NÄVLINGE LED Work Lamp positioned on a desk, illuminating a workspace.

5. Operating Instructions

The NÄVLINGE LED Work Lamp features a simple touch control for operation.

• Turning On/Off: Locate the touch switch on the lamp base or cord (depending on specific model variation). Gently touch or press the switch to turn the lamp on or off.
• Adjusting Light Direction: The lamp's arm and head are flexible. Carefully bend and pivot the lamp head to direct the light beam precisely where needed for your task.

Image: A detailed view of the lamp head, highlighting its adjustable design and integrated LED.

6. Maintenance

To ensure the longevity and optimal performance of your NÄVLINGE LED Work Lamp, follow these maintenance guidelines:

• Cleaning: Disconnect the lamp from the power outlet before cleaning. Wipe the lamp with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
• LED Light Source: The LED light source is built-in and not replaceable. Do not attempt to open or replace the LED unit.
• Storage: If storing the lamp, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.

7. Troubleshooting

If you encounter issues with your IKEA NÄVLINGE LED Work Lamp, refer to the following common troubleshooting steps:

8. Specifications

Image: Certification mark for the product, indicating compliance with standards.

9. Safety Information

• Always disconnect the lamp from the power supply before cleaning or performing any maintenance.
• Do not use the lamp in wet or damp environments. It is designed for indoor use only.
• Do not attempt to modify or repair the lamp. Repairs should only be performed by qualified personnel.
• Keep the lamp away from heat sources and direct sunlight to prevent damage.
• Ensure the power cord is not pinched or placed under heavy objects.
• This lamp is not water resistant. Avoid contact with liquids.

10. Warranty and Support

For information regarding warranty coverage, product support, or spare parts, please refer to the official IKEA website or contact IKEA customer service directly. Keep your proof of purchase for warranty claims.

IKEA Official Website: www.ikea.com