Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your New Direction Tackle D9 Dongle and S9r Receiver System. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Product Overview
The New Direction Tackle D9 Dongle is designed to connect to your existing bite alarms, transmitting signals wirelessly to a compatible New Direction Tackle receiver, such as the S9r. This system enhances your carp fishing experience by providing remote bite indication.
Key Components:
- D9 Dongle: The primary unit that connects to your bite alarm.
- S9r Receiver: (Sold separately or as part of a kit) Receives signals from the D9 Dongle.
- Angle Adaptors: For connecting the dongle to various bite alarm jack orientations.
- Battery Cover: Protects the battery compartment of the dongle.
Figure 1: Front and side view of the D9 Dongle, showing the main unit and the 2.5mm jack connection.
Figure 2: An angle adapter, used to ensure proper fitment with various bite alarm jack configurations.
Setup
Charging the D9 Dongle:
The D9 Dongle contains a Lithium-ion battery. Before first use, ensure the dongle is fully charged. Connect the dongle to a suitable USB power source using the provided charging cable (if included, otherwise use a standard micro-USB cable). The LED indicator will show charging status.
Connecting to a Bite Alarm:
Identify the 2.5mm jack output on your bite alarm. Insert the 2.5mm jack of the D9 Dongle into this output. If the jack orientation is problematic, use one of the supplied angle adaptors to achieve a secure and stable connection.
Figure 3: The D9 Dongle securely connected to the side of a bite alarm.
Figure 4: Rear view of the D9 Dongle attached to a bite alarm, showing the compact fit.
The D9 Dongle is compatible with most bite alarms featuring a 2.5mm jack, including models from FOX, DELKIM (EV plus and standard plus only), and PROLOGIC.
Pairing with an S9r Receiver:
Refer to your S9r Receiver's instruction manual for specific pairing procedures. Generally, this involves putting both the D9 Dongle and the S9r Receiver into a pairing mode. Once paired, the dongle will transmit bite indications to the receiver.
The D9 Dongle can also link with other New Direction Tackle devices such as the H9pro headlamp and B9 smart band. Consult the respective device manuals for pairing instructions.
Operating Instructions
Powering On/Off:
The D9 Dongle typically powers on automatically when connected to an active bite alarm. To power off, disconnect it from the bite alarm or follow specific instructions if a power button is present (not explicitly mentioned in provided data).
Bite Indication:
When your bite alarm detects a bite, it sends a signal to the connected D9 Dongle. The dongle then wirelessly transmits this signal to your paired S9r Receiver, which will alert you according to its settings (sound, vibration, light).
Low Battery Warning:
When the D9 Dongle's battery is low, a white LED on the dongle will flash. Recharge the dongle as soon as possible to ensure continuous operation.
Water Resistance (IPX5):
The D9 Dongle is rated IPX5, meaning it is protected against water jets from any angle. This provides protection against rain and splashes. Note: Do not submerge the dongle directly in water.
Maintenance
- Charging: Regularly charge the D9 Dongle, especially before extended fishing sessions, to prevent unexpected power loss.
- Cleaning: Wipe the dongle with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the dongle and accessories in a dry, cool place away from direct sunlight and extreme temperatures when not in use. Ensure the battery is partially charged (around 50%) before long-term storage.
- Inspection: Periodically inspect the 2.5mm jack and angle adaptors for any signs of wear or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| D9 Dongle not transmitting signals to S9r Receiver. |
|
|
| White LED on D9 Dongle is flashing. | Low battery warning. | Recharge the D9 Dongle immediately. |
| Inconsistent or false bite indications with Delkim EV Digital alarms. | The 2.5mm outlet on Delkim EV Digital alarms may constantly emit a low voltage when Nitelites are activated, confusing the dongle. | Change the setting on your Delkim EV Digital alarm to deactivate the Nitelites feature. Adjust bite alarm sensitivity if necessary to prevent false alarms from residual voltage. |
| Picking up signals from other users' dongles. | Proximity to other New Direction Tackle users with similar equipment. | Ensure your S9r Receiver is correctly paired only to your D9 Dongles. If interference persists, try to change channels on your receiver if supported, or increase distance from other users. |
Specifications
- Model: D9 Dongle
- Water Resistance: IPX5 (Protected against water jets)
- Battery Type: 1 x Lithium-ion (included)
- Compatibility: Bite alarms with 2.5mm jack output (e.g., FOX, DELKIM EV plus/standard plus, PROLOGIC). Compatible with New Direction Tackle S9r/R9s receivers, H9pro headlamp, B9 smart band.
- Package Dimensions: Approximately 17.5 x 14.2 x 7.3 cm
- Package Weight: Approximately 420 grams
Warranty and Support
Specific warranty information for the New Direction Tackle D9 Dongle and S9r Receiver System is not provided in this manual. Please refer to the product packaging, the manufacturer's official website, or your point of purchase for detailed warranty terms and conditions.
For technical support or further assistance, please contact New Direction Tackle customer service through their official channels.
