Product Overview
The Max & Lily L-Shape Twin Over Twin Bunk Bed with Bookcase is designed to provide a functional and space-saving sleeping solution. This bunk bed features a top twin bunk, a lower twin bed that can be moved independently, and an integrated bookcase. Constructed from solid New Zealand pine wood, it offers durability and a modern aesthetic with its slatted head and footboards and color-matched hardware.
Key features include tall guardrails on the top bunk for safety, an angled ladder with anti-slip steps, and reversible ladder and shelving unit placement to suit various room configurations. Each sleeping surface is designed to support up to 400 pounds.

Image: The Max & Lily L-Shape Twin Over Twin Bunk Bed with Bookcase, showcasing its design and integrated storage.
Important Safety Information
- Always use a mattress no thicker than 8 inches on the top bunk.
- Do not exceed the weight capacity of 400 pounds per sleeping surface.
- Keep guardrails in place at all times on the top bunk.
- Follow assembly instructions carefully to ensure stability and safety.
- This product meets or exceeds federal safety standards for children’s furniture.
- Ensure the ladder is securely attached before use.
- Only one person should occupy the top bunk at a time.
Setup and Assembly
Assembly of the Max & Lily L-Shape Bunk Bed requires two or more adults. All necessary instructions, upper/lower slat rolls, and hardware are included with your purchase. The ladder and shelving unit are designed to be reversible, allowing for installation on either the left or right side during assembly to best fit your room layout.
Carefully unpack all components and verify against the parts list provided in the assembly guide. Follow the step-by-step instructions to ensure proper and secure construction. Ensure all bolts and screws are tightened securely, but do not overtighten to avoid damaging the wood.

Image: Dimensional diagram of the bunk bed, illustrating its length, width, height, and underbed clearance.

Image: The bunk bed frame without mattresses, highlighting the slat support system.
Operating Instructions
Mattress Requirements
- For optimal fit and safety, use a 5-inch thick mattress on the top bunk.
- Do not exceed an 8-inch mattress thickness on the top bunk to maintain adequate guardrail height.
- The lower bed accommodates a standard twin-size mattress.
Weight Capacity
Each sleeping surface (top bunk and lower bed) is designed to support a maximum resting weight of 400 pounds. Adhering to this limit ensures the structural integrity and safety of the bed.

Image: Illustration of the 400 lb weight capacity per bed, supported by plywood slats and a metal bar.
Ladder Use
The angled ladder features wide, anti-slip steps for comfortable and secure climbing. Always face the ladder when ascending or descending. Ensure the ladder is firmly in place before use.

Image: Detail of the bunk bed ladder, highlighting the anti-slip grooved steps.
Bookcase Use
The integrated bookcase provides convenient storage for books, toys, and other essentials. Distribute weight evenly across the shelves and avoid overloading.

Image: A child utilizing the built-in bookcase for storage.
Maintenance
To maintain the appearance and longevity of your Max & Lily bunk bed, follow these guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the durable, low VOC finish.
- Hardware: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain structural stability.
- Environment: Avoid placing the bed in direct sunlight or near heat sources, which can cause wood to dry out or warp. Maintain a stable room temperature and humidity.
Troubleshooting
Bed Wobbles After Assembly
If the bed feels unstable or wobbles, ensure all assembly hardware (bolts, screws, and connectors) is fully tightened. Check that all components are correctly aligned according to the instruction manual. Uneven flooring can also contribute to wobbling; consider using furniture pads or shims if necessary.
Missing or Damaged Parts
If you discover any missing or damaged parts upon unboxing, do not proceed with assembly. Contact Max & Lily customer support immediately with your product model number and a description of the issue for assistance with replacements.
Specifications
| Feature | Detail |
|---|---|
| Brand | Max & Lily |
| Model Number | 18-911-151 |
| Color | Clay |
| Size | Twin |
| Product Dimensions (L x W x H) | 81.5" x 42.5" x 68.5" |
| Item Weight | 171 pounds |
| Material | Solid New Zealand Pine Wood |
| Finish Type | Wood, Low VOC |
| Weight Capacity (per sleeping surface) | 400 pounds |
| Compatible Mattress Size | Twin |
| Assembly Required | Yes |
| Special Features | Color Matching Hardware, Reversible Ladder & Shelving Unit |
| UPC | 814679021712 |
Warranty Information
This Max & Lily bunk bed is covered by a 1-year manufacturer's warranty. This warranty typically covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims. For specific details regarding coverage and how to make a claim, refer to the warranty documentation included with your product or contact Max & Lily customer support.
Customer Support
For further assistance, questions, or to report any issues with your Max & Lily L-Shape Twin Over Twin Bunk Bed with Bookcase, please contact Max & Lily customer service. Have your model number (18-911-151) and purchase information ready to expedite your request.
You can find more information and contact details on the official Max & Lily website or through their brand store on Amazon: