Introduction
Thank you for choosing the Adesso Oslo Floor Lamp. This manual provides essential information for the safe assembly, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before use and retain them for future reference.
The Adesso Oslo Floor Lamp features a minimalist, Scandinavian-inspired design with a sturdy metal body and a natural wood veneer drum shade. It is designed to provide versatile ambient and task lighting for various indoor spaces.
Safety Information
- All Adesso ambient lighting products are either UL listed or ETL listed, meaning they have been tested and approved to meet government-regulated safety standards for the USA.
- This product is intended for indoor use only. Do not expose to moisture or use in wet locations.
- Ensure the power is off before installing or replacing the bulb.
- Use only the specified bulb type and wattage to avoid overheating or damage.
- Keep the lamp away from flammable materials.
- Do not attempt to modify the lamp in any way. Any modifications may void the warranty and create a safety hazard.
- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid a hazard.
Package Contents
Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, please contact customer support before assembly.
- Lamp Base
- Lamp Pole Sections (typically 2-3 sections)
- Lamp Socket Assembly
- Shade Support Ring
- Hardback Drum Shade (Natural wood veneer finish)
- Instruction Manual
Note: Bulb is not included.
Setup and Assembly
The Adesso Oslo Floor Lamp requires minimal assembly. Follow these steps for quick and easy setup:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface to ensure all pieces are present.
- Assemble the Pole: Gently pull the power cord through the lamp base. Screw the pole sections together clockwise until secure. Ensure the cord is not twisted or pinched.
- Attach Pole to Base: Screw the assembled lamp pole into the lamp base clockwise until it is firmly attached. The base is weighted for stability.
- Install the Lamp Shade: Place the hardback drum shade over the lamp socket. Secure it by screwing the shade support ring onto the socket, ensuring the shade is stable and level.
- Insert the Bulb: Screw one E26 base, 100W incandescent or 12-14W LED bulb (1380-1600 lumens) into the lamp socket. Do not overtighten.
- Position the Lamp: Place the lamp in your desired location, ensuring the 5ft (60in) clear cord can reach a power outlet without being strained or creating a tripping hazard.
Image: The Adesso Oslo Floor Lamp assembled and placed in a modern living room.
Image: Detailed view of the lamp's sturdy base and the textured natural wood veneer shade.
Video: This video demonstrates the unboxing and simple assembly process of the Adesso Oslo Floor Lamp, highlighting its sturdy base and textured shade. It also shows the lamp in a bedroom setting.
Operating Instructions
To operate your Adesso Oslo Floor Lamp:
- Power On/Off: Locate the on/off rotary switch on the lamp socket. Turn the switch clockwise to turn the lamp on, and counter-clockwise to turn it off.
- Smart Outlet Compatibility: This lamp is compatible with smart outlets (not included). If using a smart outlet, ensure the lamp's rotary switch is in the 'ON' position, then control the lamp via your smart home system.
Video: This video demonstrates the operation of the rotary switch located on the lamp socket.
Maintenance
To ensure the longevity and appearance of your Adesso Oslo Floor Lamp:
- Cleaning: Dust the lamp regularly with a soft, dry cloth. For the shade, use a soft brush or a slightly damp cloth if necessary, avoiding harsh chemicals.
- Bulb Replacement: Always ensure the lamp is unplugged and the bulb has cooled before attempting to replace it.
- Inspection: Periodically check the power cord and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your Adesso Oslo Floor Lamp, please refer to the following common solutions:
- Lamp does not turn on:
- Ensure the lamp is securely plugged into a working power outlet.
- Check if the bulb is properly screwed in and not burnt out. Replace if necessary.
- Verify the rotary switch is in the 'ON' position.
- If using a smart outlet, ensure the smart outlet is powered on and functioning correctly.
- Lamp flickers:
- Ensure the bulb is screwed in tightly.
- Try a different bulb to rule out a faulty bulb.
- Check the power connection for looseness.
- Lamp is unstable:
- Ensure all pole sections are securely tightened.
- Verify the lamp base is on a flat, stable surface.
If these steps do not resolve the issue, please contact Adesso customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 6237-12 |
| Product Dimensions | 17.75"D x 17.75"W x 59.5"H |
| Base Diameter | 12.5 Inches |
| Shade Height | 10.5 Inches |
| Item Weight | 15.17 pounds |
| Material | Acrylic, Metal, Wood |
| Finish Type | Matte |
| Shade Material | Paper (Natural wood veneer finish) |
| Bulb Base | E26 |
| Max Wattage | 100 watts (Incandescent) / 12-14W (LED) |
| Brightness | 1380-1600 Lumen |
| Voltage | 120 Volts |
| Switch Type | Rotary |
| Control Method | Rotary Switch, Smart Outlet Compatible |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Minimal |
Warranty and Support
The Adesso Oslo Floor Lamp comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or replacement parts, please contact Adesso customer service through their official website or the retailer where the product was purchased. Please have your model number (6237-12) and proof of purchase available.
For additional information and product registration, visit the official Adesso website: www.adessohome.com
