1. Introduction
This manual provides instructions for assembling and caring for your KAWADA nanoblock Kiyomizu Temple building kit. This kit allows you to construct a detailed miniature replica of the famous Kiyomizu Temple, part of the nanoblock Sight to See series.
The nanoblock system features miniature building blocks, with the smallest pieces measuring 4mm x 4mm x 5mm. This kit contains 620 pieces and is rated at a difficulty level of 3 out of 5, suitable for ages 15 and up. The finished model stands approximately 2.91 inches tall.
Figure 1: Assembled Kiyomizu Temple nanoblock model with autumn foliage.
2. Setup and Preparation
2.1 Unpacking the Kit
- Carefully open the product box.
- Verify that all pieces are present according to the included parts list. Due to the small size of the blocks, it is recommended to work on a clean, flat surface to prevent loss of pieces.
- Locate the instruction booklet.
2.2 Recommended Tools
- Tweezers: Highly recommended for handling the small nanoblock pieces, especially for precise placement.
- Small container: Useful for organizing different colored or shaped blocks during assembly.
Figure 2: Nanoblock model demonstrating the small scale of the blocks.
3. Assembly Instructions
Follow the detailed step-by-step instructions provided in the instruction booklet included with your kit. Each nanoblock set comes with clear, visual guides to assist in the construction process.
3.1 General Assembly Tips
- Start with the Base: Most nanoblock models begin with a base plate. Ensure this is stable before adding layers.
- Layer by Layer: Build the model layer by layer, carefully following the numerical sequence in the instructions.
- Check Placement: Due to the small size, double-check block placement in each step to avoid errors that can affect later stages.
- Use Tweezers: For intricate sections or very small blocks, tweezers can greatly improve precision and reduce frustration.
- Seasonal Options: This Kiyomizu Temple kit includes options for different tree colors (e.g., autumn leaves or cherry blossoms). Refer to the instructions for how to swap these elements.
Figure 3: Kiyomizu Temple model with cherry blossom trees, demonstrating seasonal variation.
3.2 Difficulty Level
This model is rated at a difficulty level of 3 out of 5. This indicates a moderate challenge, requiring attention to detail and patience. If you are new to nanoblocks, consider starting with simpler models before attempting higher difficulty levels.
Figure 4: Nanoblock difficulty level guide.
4. Maintenance and Care
4.1 Cleaning
- To clean your assembled nanoblock model, use a soft, dry brush or a can of compressed air to remove dust.
- For stubborn dirt, gently wipe with a slightly damp cloth. Avoid harsh chemicals or abrasive materials.
4.2 Storage
- Store the assembled model in a stable location to prevent accidental disassembly.
- Keep loose blocks in a secure container to avoid loss.
- Avoid prolonged exposure to direct sunlight, which may cause colors to fade over time.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing pieces | Small blocks easily misplaced or lost during unpacking/assembly. | Carefully check the work area and packaging. If pieces are genuinely missing from a new kit, contact the retailer or manufacturer. |
| Difficulty connecting blocks | Incorrect alignment or insufficient pressure. | Ensure blocks are perfectly aligned before pressing down. Use firm, even pressure. Tweezers can help with alignment. |
| Model is unstable or falls apart | Blocks not fully connected, or an error in a previous step. | Review the instruction steps carefully, especially recent ones. Ensure all blocks are securely pressed together. |
| Instructions are unclear | Visual interpretation difficulty. | Examine the diagrams closely. Sometimes rotating the instruction booklet or the model can provide a better perspective. Online communities or videos may offer additional visual guidance. |
Warning: This product contains small parts which may pose a choking hazard. Not suitable for children under 3 years. Recommended age for assembly is 15 years and up.
6. Product Specifications
- Brand: KAWADA
- Model Number: NBH_194
- Product Name: Kiyomizu Temple, Sight to See Series Building Kit
- Number of Pieces: 620
- Difficulty Level: 3 out of 5
- Assembled Dimensions: Approximately 3.14 x 4.72 x 2.91 inches (8 x 12 x 7.4 cm)
- Item Weight: 6 ounces (170 grams)
- Recommended Age: 15 years and up
- Release Date: January 1, 2022
7. Warranty Information
Specific warranty details for KAWADA nanoblock products are typically provided with the product packaging or on the official KAWADA website. Please refer to these sources for the most accurate and up-to-date warranty information.
For products purchased in the U.S. Markets, the product box will have a Bluefin / Bandai Namco warning label. This label indicates an officially licensed Kawada product distributed by its sole authorized distributor (Bluefin) for the U.S. Markets and entitles the purchaser to product support assistance within the United States.
8. Customer Support
For further assistance, missing parts, or inquiries regarding your KAWADA nanoblock Kiyomizu Temple kit, please contact the retailer where the product was purchased. You may also visit the official KAWADA nanoblock website for frequently asked questions and contact information.
Official KAWADA nanoblock website: www.nanoblock.com