1. Introduction
Thank you for choosing the MOES WiFi Smart Ceiling Fan Light Wall Switch. This device allows for intelligent control of your ceiling fan and light, offering convenience through touch control, mobile application, and voice commands. Please read this manual carefully before installation and use to ensure proper operation and safety.
2. Safety Information
- WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician.
- Always disconnect power at the circuit breaker before installing or servicing the switch.
- This smart switch requires a neutral wire in your switch box to operate correctly. If a neutral wire is not present, consult a qualified electrician.
- Only compatible with a 2.4GHz Wi-Fi network.
- Not compatible with standard US 2/3/4 gang switch plates. Designed for 1-gang switch boxes.
- Not compatible with exhaust-type fans or ceiling fans with a canopy module.
- Maximum total current for the fan is 1.5A.
3. Product Overview
The MOES WiFi Smart Ceiling Fan Light Wall Switch integrates touch control with smart home capabilities. It features separate controls for the fan and light, allowing independent operation and fan speed adjustment.
Front view of the MOES WiFi Smart Ceiling Fan Light Wall Switch, showing touch icons for light and fan speed controls.
4. Compatibility Requirements
Ensure your setup meets the following requirements for optimal performance:
- Neutral Wire: Required for proper operation.
- Wi-Fi Network: 2.4GHz Wi-Fi network connection.
- Switch Box: Compatible only with 1-gang switch boxes.
- Fan Type: Compatible with standard fan lights. Not for exhaust-type fans or fans with canopy modules.
- Load Wires: Requires 2 separate load wires for the light and ceiling fan.
Diagram illustrating compatible fan light types and incompatible exhaust-type fans, along with key compatibility requirements.
5. Installation
Follow these steps carefully for installation. If you are unsure, consult a qualified electrician.
- Turn Off Power: Locate your circuit breaker and turn off the power to the switch box you will be working on. Verify power is off using a voltage tester.
- Remove Old Switch: Carefully remove the existing wall plate and switch from the wall box.
- Identify Wires: Identify the following wires in your switch box:
- Live (Line) Wire (L IN): Typically black, carries power from the circuit breaker.
- Neutral Wire (N IN): Typically white, completes the circuit.
- Fan Load Wire (L1 Fan OUT): Connects to the ceiling fan.
- Light Load Wire (L2 Light OUT): Connects to the ceiling light.
- Ground Wire: Typically bare copper or green.
- Wire the Smart Switch: Connect the wires from your wall box to the corresponding terminals on the MOES Smart Switch as shown in the diagram below. Ensure all connections are secure.
- Connect the Live (Line) wire to the 'L IN' terminal.
- Connect the Neutral wire to the 'N IN' terminal.
- Connect the Fan Load wire to the 'L1 Fan OUT' terminal.
- Connect the Light Load wire to the 'L2 Light OUT' terminal.
- Connect the Ground wire to the ground terminal (if available on the switch, otherwise ensure it is safely capped or connected to the box if applicable).
- Mount the Switch: Gently push the wired switch into the wall box and secure it with screws. Attach the faceplate.
- Restore Power: Turn the power back on at the circuit breaker. The switch indicator lights should illuminate.
Rear view of the MOES Smart Fan Light Switch showing terminal labels for wiring connections.
6. App Setup and Pairing
To enable smart features, connect your switch to the Smart Life or Tuya Smart app.
- Download App: Download the 'Smart Life' or 'Tuya Smart' app from your mobile device's app store (iOS or Android).
- Register/Login: Open the app and register for a new account or log in with an existing one.
- Enter Pairing Mode: After installation and power restoration, the switch's indicator light should blink rapidly. If not, press and hold the light button on the switch for 5-10 seconds until it blinks rapidly.
- Add Device: In the app, tap the '+' icon (usually in the top right corner) to add a device. The app should automatically discover the switch via Wi-Fi and Bluetooth for quick configuration.
- Confirm Connection: Follow the in-app prompts to confirm the device and connect it to your 2.4GHz Wi-Fi network. Enter your Wi-Fi password when requested.
- Rename Device: Once connected, you can rename the switch (e.g., "Living Room Fan Light") for easier control.
Illustration of the simplified pairing process using the Smart Life/Tuya app with Wi-Fi and Bluetooth connectivity.
7. Operating Instructions
7.1 Manual Touch Control
The switch features touch-sensitive buttons for direct control:
- Light Icon: Tap to turn the light ON/OFF.
- Fan Icons: Tap to turn the fan ON/OFF and adjust fan speed (low, medium, high).
7.2 App Control
Using the Smart Life/Tuya app, you can control your fan and light remotely.
- Independent Control: Turn the fan and light ON/OFF separately.
- Fan Speed Adjustment: Adjust the fan speed from 1% to 100% via a slider in the app.
- Schedules/Countdown: Set timers to automatically turn the fan or light ON/OFF at specific times or after a countdown (1 minute to 60 minutes).
- Remote Access: Control your fan and light from anywhere with an internet connection.
Illustration of remote control functionality using the Smart Life app to manage fan and light settings.
Screenshot showing the automatic On/Off timer feature within the app, allowing users to set countdowns.
7.3 Voice Control
The switch is compatible with Amazon Alexa and Google Home for convenient voice commands.
- Connect to Voice Assistant: Link your Smart Life/Tuya account to Amazon Alexa or Google Home through their respective apps.
- Voice Commands: Use commands such as:
- "Alexa, turn on the living room ceiling fan."
- "Hey Google, turn off the fan light."
- "Alexa, set the fan speed to medium."
Image demonstrating voice control capabilities with Amazon Alexa and Google Home devices.
7.4 Group Control & Sharing
- Group Control: Create groups of multiple MOES smart switches within the app to control them simultaneously.
- Device Sharing: Share control of the switch with family members through the app, allowing multiple users to operate it.
7.5 Backlight Switch
The switch features an optional backlight that can be turned ON or OFF via the app, preventing light disturbance during sleep.
Screenshot showing the 'Backlight switch' option within the app settings, allowing users to toggle the backlight.
8. Maintenance
- Clean the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the switch is kept dry and away from excessive moisture.
- Periodically check wiring connections for tightness, especially if any issues arise. Always turn off power at the circuit breaker before inspection.
9. Troubleshooting
- Switch Not Responding:
- Check if the circuit breaker is ON.
- Verify that the neutral wire is correctly connected.
- Ensure all wiring connections are secure.
- Cannot Connect to Wi-Fi:
- Ensure your Wi-Fi network is 2.4GHz. The switch does not support 5GHz networks.
- Check your Wi-Fi password for accuracy.
- Move the switch closer to your Wi-Fi router or consider a Wi-Fi extender.
- Ensure the switch is in pairing mode (indicator light blinking rapidly).
- Restart your router and try pairing again.
- Fan Humming/Noise:
- The updated version of this switch is designed to minimize motor current sound. If humming persists, ensure the fan is compatible and not an exhaust-type or canopy module fan.
- Verify the fan's maximum current draw does not exceed 1.5A.
- Light/Fan Not Controlled Independently:
- Ensure you have two separate load wires connected to the 'L1 Fan OUT' and 'L2 Light OUT' terminals.
- Check app settings to confirm independent control options are selected.
- Voice Control Not Working:
- Verify that your Smart Life/Tuya account is correctly linked to Amazon Alexa or Google Home.
- Ensure the device name in the app is recognized by your voice assistant.
- Check your internet connection.
10. Specifications
Diagram showing the physical dimensions of the MOES Smart Fan Light Switch.
| Feature | Specification |
|---|---|
| Model Number | 797334600258 (HU-XI-80) |
| Brand | MOES |
| Operating Voltage | 100-250VAC |
| Current Rating | 10 Amps (Light), 0.7 Amps (Fan) |
| Max. Total Current (Fan) | 1.5A |
| Connectivity Protocol | Wi-Fi (2.4GHz b/g/n) |
| Control Method | Touch, Remote (App), Voice (Alexa, Google Assistant) |
| Operation Mode | Off |
| Mounting Type | Wall Mount |
| Circuit Type | 3-way (with multi-control association) |
| International Protection Rating | IP65 |
| Material | Copper, Brass (Contact Material) |
| Color | White |
| Item Weight | 8.1 ounces |
| Package Dimensions | 5.63 x 3.66 x 2.13 inches |
| Panel Size | 2.8 x 4.6 inches (approx. 72mm x 118mm) |
11. Warranty and Support
For warranty information and technical support, please refer to the official MOES website or contact MOES customer service directly. Keep your purchase receipt for warranty claims.
