Introduction
Thank you for choosing the SATECHI Wireless Bluetooth 34-Key Numeric Keypad. This compact and elegant keypad is designed to enhance your productivity by providing a full numeric input solution for your macOS, iPadOS, and iOS devices. Its durable aluminum construction and rechargeable battery make it an ideal companion for both desktop and on-the-go use. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Image: Top-down view of the SATECHI Wireless Bluetooth 34-Key Numeric Keypad, showcasing its full numeric layout and function keys.
Setup and Connection
Charging the Keypad
Before initial use, ensure your keypad is fully charged. The keypad features a USB-C port for convenient charging.
- Locate the USB-C port on the side of the keypad.
- Connect the provided USB-C charging cable to the keypad and to a powered USB-C port or adapter.
- The charging LED indicator will illuminate during charging. A full charge typically takes 2-3 hours.
- Once fully charged, the keypad offers up to 50 hours of battery life between charges.
Image: Underside view of the keypad highlighting the USB-C charging port, power/pairing LED indicator, charging LED indicator, pairing button, and on/off switch.
Bluetooth Pairing
Follow these steps to pair your SATECHI Numeric Keypad with your device:
- Turn on the keypad using the ON/OFF switch located on the side. The power/pairing LED indicator will light up.
- Press and hold the Pairing Button for 5 seconds until the power/pairing LED indicator begins to flash rapidly. This indicates the keypad is in pairing mode.
- On your macOS, iPadOS, or iOS device, navigate to System Settings (or System Preferences) > Bluetooth.
- Locate "SATECHI Numeric Keypad" in the list of available devices and click Connect or Pair.
- Once connected, the power/pairing LED indicator will stop flashing and remain solid for a few seconds before turning off. Your keypad is now ready for use.
Image: Visual guide illustrating the steps to pair the SATECHI Numeric Keypad via Bluetooth, including turning on, entering pairing mode, and connecting to a laptop.
Operating the Keypad
Key Functions
The SATECHI Numeric Keypad features a comprehensive 34-key layout, including a full numeric number pad, navigational arrows, and dedicated macOS shortcut keys.
- Numeric Number Pad: Standard 0-9 digits, decimal point, and arithmetic operators (+, -, *, /).
- Navigational Arrows: Up, Down, Left, and Right arrow keys for easy navigation within documents and spreadsheets.
- MacOS Shortcut Keys: Includes F13, F14, F15, prtscn (print screen), home, page up, delete, end, and page down for enhanced productivity on macOS. Note: Some shortcuts may not be supported by other operating systems.
- Enter Key: Functions as a standard Enter key.
- Clear Key: Clears the current input.
- Tab Key: Moves the cursor to the next tab stop.
Image: Angled view of the keypad, pointing out the MacOS shortcut keys, navigational arrows, and the full numeric number pad.
Power Saving Mode
To conserve battery life, the keypad will enter a sleep mode after a period of inactivity. To wake it up, simply press any key. There might be a slight delay for the first keystroke to register as the keypad reconnects.
Maintenance
To ensure the longevity and optimal performance of your SATECHI Numeric Keypad, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth to wipe the surface of the keypad. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture and do not spray cleaners directly onto the keypad.
- Storage: When not in use for extended periods, store the keypad in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: The keypad features a durable aluminum design, but avoid dropping it or subjecting it to strong impacts, which could damage internal components or the casing.
- Battery Care: To maintain battery health, avoid fully discharging the battery frequently. Recharge the keypad when the battery low indicator appears.
Troubleshooting
If you encounter issues with your SATECHI Numeric Keypad, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad does not connect via Bluetooth. | Keypad is off, out of range, or not in pairing mode. Device's Bluetooth is off. Interference. | Ensure keypad is on and charged. Place keypad closer to device. Put keypad into pairing mode (press and hold pairing button for 5 seconds). Turn device's Bluetooth off and on again. Remove other Bluetooth devices causing interference. |
| Keys are unresponsive or delayed. | Keypad is in sleep mode. Low battery. Bluetooth connection issue. | Press any key to wake the keypad. Recharge the keypad. Re-pair the keypad with your device. |
| Specific macOS shortcut keys do not work. | Operating system incompatibility. | Verify that your operating system (if not macOS) supports the specific shortcut functions. Some keys are designed specifically for macOS. |
| Battery drains quickly. | Frequent use. Old battery. | Ensure the keypad is fully charged. If battery life significantly degrades over time, contact SATECHI support. |
Specifications
Detailed technical specifications for the SATECHI Wireless Bluetooth 34-Key Numeric Keypad:
- Model Number: ST-XLABKS
- Color: Silver
- Connectivity Technology: Bluetooth, USB-C (for charging)
- Keyboard Description: US English Layout, 34 Keys
- Special Features: Durable Aluminum Design, Rechargeable Battery
- Compatible Devices: 2023 MacBook Pro 14"/16" (M2 Pro & Max), 2022 MacBook Pro/Air M2, 2021 MacBook Pro 14"/16" (M1 Pro & Max), 2020 MacBook Pro/Air M1, 2016-2019 MacBook Pro, 2018 MacBook Air, 2023 Mac Mini M2/M2 Pro, 2020/2018 Mac Mini, 2021/2020/2019/2017 iMac, iMac Pro, M2/M1 iPad Pro, M1 iPad Air, 2022 iPad 10th-Gen, 2021 iPad Pro, 2021 iPad Mini, 2015-2017 MacBook, iPhone 16/16 Pro, 15 Pro Max/15 Pro/15/15 Plus, iPhone 14 Pro Max/14 Pro/14/14 Plus, iPhone 13 Pro Max/13 Pro/13/13 Mini, iPhone 12 Pro Max/12 Pro/12/12 Mini.
- Operating System Compatibility: macOS, iPadOS, iOS
- Battery Composition: Lithium-polymer
- Product Dimensions: 14.6L x 11.4W x 0.9H centimeters (approximately 5.75" L x 4.49" W x 0.35" H)
- Manufacturer: Satechi
- Country of Origin: China
Image: The SATECHI Numeric Keypad integrated into a modern desk setup, demonstrating its compact size and compatibility with other Apple devices.
Warranty and Support
SATECHI stands behind the quality of its products. Your SATECHI Wireless Bluetooth 34-Key Numeric Keypad comes with a manufacturer's warranty and dedicated customer support.
- Manufacturer's Warranty: This product is covered by a 2-year manufacturer warranty. Please retain your proof of purchase for warranty claims.
- Spare Parts Availability: Spare parts are available for 1 year.
- Customer Support: For technical assistance, warranty inquiries, or any other questions, please visit the official SATECHI website or contact their customer service directly. You can also visit the SATECHI Brand Store on Amazon for more information and product resources.
