Hemudu HT3001B Universal Floor TV Stand with 3 Shelves

Product Overview

The Hemudu HT3001B is a versatile universal floor TV stand designed to accommodate 19 to 43-inch flat-screen televisions. It features a robust construction with a tempered glass base and steel pillar, providing stable support. The stand offers adjustable height, a 100-degree swivel range, and a tilt function for optimal viewing angles. Integrated shelves provide space for media devices, and a cable management system helps maintain a tidy appearance.

Safety Information

WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of warranty.

• Weight Capacity: Do not exceed the maximum weight capacity of 99 lbs (45 kg) for the TV mount. Each shelf has a maximum weight capacity of 22 lbs (10 kg).
• TV Size: This stand is compatible with TVs ranging from 19 to 43 inches.
• VESA Compatibility: Ensure your TV's VESA mounting pattern is compatible with 75x75mm, 100x100mm, 200x100mm, or 200x200mm.
• Stability: Always place the TV stand on a flat, stable, and level surface. Avoid placing it on uneven ground or near edges where it could tip over.
• Assembly: Ensure all screws and fasteners are securely tightened during assembly. Periodically check all connections to ensure they remain tight.
• Children and Pets: Keep children and pets away from the TV stand during assembly and ensure the TV is securely mounted to prevent accidental tipping.

Setup and Assembly Instructions

Follow these steps for proper assembly of your Hemudu HT3001B TV Stand. A detailed installation manual is included with the product, and parts are clearly labeled.

1. Base Assembly: Attach the main support column to the tempered glass base using the provided hardware. Ensure all screws are tightened for stability.
2. Shelf Installation: Secure the three shelves to the main column at your desired heights. The shelves are designed for heat dissipation for small devices.
3. TV Bracket Attachment: Attach the VESA mounting frame to the back of your television using the appropriate screws and spacers provided. Refer to your TV's manual for specific VESA hole patterns.
4. Mounting TV to Stand: Carefully lift the TV with the attached frame and latch it onto the main column of the TV stand. Ensure it is securely seated.
5. Secure TV: Use the safety knob to secure the TV frame to the stand, preventing accidental dislodgement.
6. Cable Management: Utilize the integrated wire clips along the main column to organize and conceal messy cables, contributing to a clean setup.

Image: Close-up of the stand's features, including the 10mm tempered glass base, cable management clips, anti-slip rubber gaskets, and screw storage.

Operating Instructions

The Hemudu HT3001B TV Stand offers multiple adjustment options to enhance your viewing experience.

• Swivel Function: The TV mount can swivel 50 degrees to the left and 50 degrees to the right, providing a total of 100 degrees of rotation. Gently push the TV to the desired angle.
• Tilt Function: The TV can be tilted from -15 degrees to +10 degrees. Loosen the tilt knob on the side of the TV bracket, adjust the TV to the preferred tilt angle, and then tighten the knob to secure it.
• Height Adjustment: The TV mount offers 16 levels of height adjustment, allowing you to raise or lower the TV by approximately 6 inches. To adjust, loosen the safety knob, lift the TV off the current mounting holes, reposition it to the desired height, and re-secure the safety knob. The shelves are also independently height-adjustable.

Image: Illustrates the 100-degree swivel range of the TV stand, allowing for flexible viewing angles.

Image: Shows the tilt function of the TV stand, useful for adjusting the vertical viewing angle.

Image: Depicts the 16-level height adjustment feature, allowing users to set the TV at their preferred viewing height.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the stand and shelves. For the tempered glass base, a glass cleaner can be used. Avoid abrasive cleaners or solvents.
• Periodic Checks: Regularly inspect all screws, bolts, and connections to ensure they are tight and secure. Re-tighten if necessary.
• Cable Management: Periodically check the cable management clips to ensure cables are neatly organized and not pinched or damaged.

Troubleshooting

• TV Not Level: If the TV appears unlevel, check that all mounting screws on the VESA bracket and the main column are securely tightened. Ensure the stand is on a level surface.
• Difficulty Adjusting Height/Tilt/Swivel: Ensure all adjustment knobs are loosened before attempting to move the TV. Tighten them firmly once the desired position is achieved.
• Stand Instability: Verify that the base is fully assembled and all screws connecting the column to the base are tight. Ensure the total weight of the TV and devices on shelves does not exceed the specified weight limits.

Specifications

Warranty and Support

For warranty information, technical support, or any questions regarding your Hemudu HT3001B Universal Floor TV Stand, please refer to the contact information provided in your product packaging or visit the official Hemudu website.