Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Chacon Wireless Remote Control Outlet Kit, Model 54663. This kit includes three wireless outlets and one remote control, designed to provide convenient control over your electrical appliances.
Image: The Chacon Wireless Remote Control Outlet Kit, showing three white wireless outlets and a matching white remote control. The outlets are designed for European sockets.
Important Safety Information
- Read all instructions carefully before use.
- Do not exceed the maximum load capacity of 3680W for each outlet.
- For indoor use only. Do not expose to moisture or extreme temperatures.
- Ensure the battery in the remote control is correctly installed.
- Keep out of reach of children.
- Do not disassemble or attempt to repair the devices. Contact qualified personnel for service.
- Ensure the product is compatible with your local electrical standards (e.g., socket type).
Package Contents
The Chacon Wireless Remote Control Outlet Kit includes:
- 3 x Wireless Remote Control Outlets
- 1 x Remote Control (with 1 Lithium-ion battery included)
- 1 x Instruction Manual (this document)
Product Features
- Control up to 3 electrical appliances wirelessly.
- On/Off function for each connected device.
- Radio frequency: 433.92 MHz.
- Transmission distance: Up to 30 meters (unobstructed).
- Easy setup and pairing.
Setup Instructions
1. Remote Control Battery Installation
- Locate the battery compartment on the back of the remote control.
- Open the compartment cover.
- Insert the included Lithium-ion battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely. Ensure the small contact tab is removed if present, to guarantee proper contact.
Image: A close-up view of the Chacon remote control, highlighting the ON/OFF buttons and the individual channel buttons labeled A, B, C, and D.
2. Pairing Outlets with the Remote Control
Each outlet needs to be paired with a specific channel (A, B, C, or D) on the remote control.
- Plug one wireless outlet into a standard wall socket. The indicator light on the outlet should blink or be off.
- Press and hold the pairing button on the side of the wireless outlet for approximately 3 seconds until the indicator light starts blinking rapidly.
- Within 5 seconds of the light blinking, press the "ON" button for your desired channel (e.g., "A ON") on the remote control.
- The indicator light on the outlet should stop blinking and remain solid for a moment, then turn off, indicating successful pairing.
- Repeat this process for the other two outlets, assigning them to different channels (e.g., "B ON", "C ON").
Image: A Chacon wireless outlet plugged into a wall socket, positioned discreetly next to a white architectural pillar.
3. Connecting Appliances
Once paired, you can connect your appliances:
- Plug the power cord of your appliance (e.g., lamp, fan) into the paired wireless outlet.
- Ensure the appliance itself is switched on if it has its own power switch.
Operating Instructions
Turning Appliances On/Off
- To turn an appliance ON, press the corresponding "ON" button for its assigned channel (e.g., "A ON") on the remote control.
- To turn an appliance OFF, press the corresponding "OFF" button for its assigned channel (e.g., "A OFF") on the remote control.
The remote control has a transmission distance of up to 30 meters in open areas. Obstacles such as walls and furniture may reduce this range.
Image: A hand operating the Chacon remote control, demonstrating its use to switch on a floor lamp, which is illuminated.
Maintenance
Cleaning
Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Battery Replacement
If the remote control's range decreases or it stops responding, the battery may need replacement. Follow the battery installation steps in the "Setup Instructions" section to replace the Lithium-ion battery.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Outlet does not respond to remote. |
|
|
| Appliance does not turn on/off. |
|
|
| Reduced remote control range. |
|
|
Technical Specifications
| Model Number | 54663 |
| Brand | Chacon |
| Power Source | Electric Corded |
| Maximum Load (per outlet) | 3680W |
| Radio Frequency | 433.92 MHz |
| Transmission Distance | Up to 30 meters (unobstructed) |
| Remote Control Battery Type | Lithium-ion (1 required, included) |
| Product Dimensions (Kit Packaging) | 8 x 24 x 20 cm |
| Usage Environment | Indoor |
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Chacon website. Keep your proof of purchase for warranty claims.
For further assistance, please contact Chacon customer service.
