Instruction Manual for Bear Archery Species LD RTH Compound Bow

1. Product Overview

The Bear Archery Species LD RTH (Ready-to-Hunt) compound bow, model AV92B11006L, is designed for high performance and user-friendly operation. This left-hand model features a Realtree Edge camouflage finish, making it suitable for various hunting environments. It represents the pinnacle of fit and finish, ensuring a reliable and effective archery experience.

Figure 1.1: Front view of the Bear Archery Species LD RTH Compound Bow, showcasing its overall design and Realtree Edge finish.

Key features include:

• Built for high performance, offering consistent power and accuracy.
• Exemplary fit and finish, ensuring durability and aesthetic appeal.
• User-friendly design, making it accessible for archers of varying skill levels.

2. Setup and Initial Inspection

Upon receiving your Bear Archery Species LD RTH compound bow, carefully remove it from its packaging. It is crucial to perform an initial inspection to ensure all components are present and undamaged before proceeding with setup.

2.1 Unboxing and Component Check

• Gently remove the bow and all accessories from the box.
• Verify that all listed components are included. The RTH package typically includes the bow, sight, arrow rest, quiver, stabilizer, and a D-loop.
• Inspect the bow for any visible damage to the limbs, riser, cams, strings, and cables. If any damage is found, do not attempt to use the bow and contact Bear Archery customer support immediately.

2.2 Basic Assembly (if required)

While the Species LD RTH is largely pre-assembled, some accessories may require attachment. Refer to the specific instructions provided with each accessory for detailed guidance.

• Sight Installation: Attach the sight to the designated mounting holes on the riser. Ensure it is securely fastened but do not overtighten.
• Arrow Rest Installation: Mount the arrow rest to the riser. Proper alignment is critical for consistent arrow flight.
• Quiver Attachment: Secure the quiver to the bow.
• Stabilizer Attachment: Screw the stabilizer into the front bushing of the riser.

Figure 2.1: Detailed view of the arrow rest and quiver mounting area, illustrating typical accessory attachment points.

It is highly recommended to have your bow professionally tuned and set up by a certified archery technician to ensure optimal performance and safety.

3. Operating Your Compound Bow

Safe and effective operation of your compound bow requires understanding proper technique and adherence to safety guidelines.

3.1 Safety Guidelines

• Always point the bow in a safe direction.
• Ensure your shooting lane is clear of obstructions and people.
• Never dry fire the bow (drawing and releasing the string without an arrow). Dry firing can cause severe damage to the bow and potential injury.
• Always use arrows that are correctly spined and weighted for your bow's draw weight and length.
• Wear appropriate safety gear, including armguard and finger protection.

3.2 Shooting Procedure

1. Nocking the Arrow: Securely attach the arrow to the string at the nocking point. Ensure the fletching is correctly oriented.
2. Stance: Adopt a stable and comfortable stance, typically with feet shoulder-width apart, perpendicular to the target.
3. Grip: Hold the bow grip firmly but relaxed, avoiding excessive torque.
4. Drawing the Bow: Smoothly draw the string back to your anchor point using your back muscles, not just your arm.
5. Aiming: Align your sight pin with the target.
6. Release: Execute a smooth and consistent release, allowing the arrow to launch cleanly.

Figure 3.1: Side view of the compound bow, highlighting the cam system and string path critical for drawing and releasing an arrow.

4. Maintenance

Regular maintenance is essential to preserve the performance, safety, and longevity of your compound bow.

4.1 Cleaning

• After each use, wipe down the bow with a clean, dry cloth to remove dirt, dust, and moisture.
• Pay particular attention to the string, cables, and cams, ensuring no debris interferes with their movement.

4.2 String and Cable Care

• Inspect the bowstring and cables regularly for signs of fraying, wear, or damage.
• Apply bowstring wax to the main string and cables periodically (e.g., every 5-10 shooting sessions) to protect them from wear and moisture. Rub the wax in thoroughly with your fingers until it disappears.
• Replace strings and cables if significant wear or damage is observed. This should ideally be done by a professional.

4.3 Limb and Riser Inspection

• Check the limbs for any cracks, splinters, or delamination.
• Ensure all screws and bolts on the riser and limb pockets are tight. Do not overtighten limb bolts without proper knowledge and tools.

Figure 4.1: Close-up of the bow limbs, which should be regularly inspected for structural integrity.

5. Troubleshooting

This section addresses common issues you might encounter with your compound bow. For complex problems, always consult a professional archery technician.

For issues not listed or for problems requiring specialized tools, always seek assistance from a qualified archery technician.

6. Specifications

The following table provides detailed specifications for the Bear Archery Species LD RTH Compound Bow, Model AV92B11006L.

7. Warranty and Support

For specific warranty information regarding your Bear Archery Species LD RTH compound bow, please refer to the documentation included with your purchase or visit the official Bear Archery website. Warranty terms and conditions typically cover manufacturing defects and vary by product and region.

For technical support, service, or to locate an authorized dealer or service center, please contact Bear Archery directly through their official channels. You can often find contact information and support resources on their website.

Online Resources:

• Visit the Bear Archery Store on Amazon for product information and updates.
• Consult the manufacturer's official website for the most current support documentation and contact details.