Introduction
The Ring Solar Steplight is a motion-activated, solar-powered LED light designed to illuminate steps, decks, and walkways. It integrates with the Ring app and Amazon Sidewalk for smart controls and connectivity with other Ring devices, enhancing safety and convenience around your home.
Image: The Ring Solar Steplight in black, featuring a solar panel on top and a motion sensor on the front, designed for outdoor use.
Setup and Installation
What's in the Box
- Ring Smart Lighting Solar Steplight
- 18650 Lithium-Ion Rechargeable Battery
- Micro USB Charging Cable
- User Manual
- Security Sticker
- Installation Hardware (screws)
Requirements
- Power drill and bits (not included)
- Ring Bridge (required for smart controls via the Ring app and connectivity with other Ring products, sold separately)
Installation Steps
- Charge the Battery: Before installation, fully charge the included 18650 Lithium-Ion battery using the Micro USB Charging Cable.
- Choose a Location: Select a location for your steplight that receives direct sunlight for several hours each day to ensure optimal solar charging. The light should be positioned to effectively illuminate steps or walkways.
- Mount the Steplight: Use the provided installation hardware to securely mount the steplight to most surfaces. Ensure the solar panel faces upwards towards the sun. The approximate installation time is 5 minutes.
- Connect to Ring App (Optional): If you have a Ring Bridge, open the Ring app and follow the in-app instructions to add your new Solar Steplight. This enables smart controls and integration with other Ring devices.
Image: Two white Ring Solar Steplights mounted on outdoor steps, providing illumination for safe passage at night.
Operating Instructions
Motion Detection
The Ring Solar Steplight features adjustable motion detection with up to a 120° field of view and a 15-foot detection range. The detection angle is dependent on the distance from the unit. When motion is detected, the light will activate, providing up to 50 lumens of white light.
Ring App Control
With a Ring Bridge (sold separately), you can control your Solar Steplight directly from the Ring app. This allows you to:
- Set schedules for when the light should be active.
- Manually turn the lights on and off.
- Customize motion detection settings and light duration (auto shut-off time adjustable from 30 seconds to 2 minutes).
- Receive mobile notifications when motion is detected.
Image: A smartphone displaying a Ring app notification, indicating that motion has been detected in a designated area.
Image: The Ring app interface on a smartphone, showing options to control and manage multiple Ring smart light devices.
Amazon Sidewalk Connectivity
When connected to Amazon Sidewalk, the Ring Solar Steplight can utilize customizable smart controls within the Ring app. This allows for synchronization with other Ring smart lights, as well as select Ring doorbells, cameras, and Alexa-enabled devices.
Device Interconnectivity
The steplight can be configured to respond in real-time. If one connected Ring smart light detects motion, it can activate your other linked Ring devices, such as cameras or additional lights, to create a unified security and lighting system.
Image: An outdoor residential scene at night, showcasing a family on a porch illuminated by Ring smart lights, with additional path lights in the garden.
Voice Control with Alexa
The Ring Solar Steplight is compatible with Alexa-enabled devices. Once connected through the Ring app and Amazon Sidewalk, you can use voice commands to control your lights, for example, by saying, "Alexa, turn on the lights."
Image: An Amazon Echo Dot device on a wooden table, with a graphic speech bubble above it stating, "Alexa, turn on the lights."
Maintenance
Solar Charging
The primary power source for the Ring Solar Steplight is its integrated solar panel. For optimal performance, ensure the steplight is placed in a location that receives direct sunlight for several hours daily. This allows the internal 3.7V 18650 Lithium Ion Cell battery to recharge and store power.
Battery Recharging
In periods of prolonged cloudy weather or if the steplight is installed in a shaded area, the battery may require supplemental charging. The steplight can be recharged via a Micro USB cord. Periodically check the battery status in the Ring app if available.
Weather Resistance
The Ring Solar Steplight is designed to be weather-resistant with an IP66 rating, meaning it is protected against dust ingress and powerful water jets. It operates effectively in temperatures ranging from -4°F to 122°F (-20°C to 50°C). Regular cleaning of the solar panel with a soft, damp cloth can help maintain charging efficiency.
Troubleshooting
Light Not Turning On
- Check Battery Charge: Ensure the battery is sufficiently charged. If the steplight is not receiving enough direct sunlight, the battery may be depleted. Try recharging it via the Micro USB port.
- Verify Motion Detection Settings: In the Ring app, confirm that motion detection is enabled and the sensitivity settings are appropriate for your environment.
- Environmental Factors: Extreme temperatures outside the operating range (-4°F to 122°F) can affect performance.
Poor Solar Charging
- Sunlight Exposure: Relocate the steplight to an area that receives more direct sunlight throughout the day.
- Clean Solar Panel: Dust, dirt, or debris on the solar panel can reduce charging efficiency. Gently clean the panel with a soft, damp cloth.
Connectivity Issues (Ring App/Amazon Sidewalk)
- Ring Bridge: Ensure your Ring Bridge is powered on, connected to your network, and within range of the steplight. A Ring Bridge is required for smart features.
- App Updates: Make sure your Ring app is updated to the latest version.
- Reset Device: If issues persist, try resetting the steplight according to the instructions in the Ring app or the included user manual.
Specifications
| Approximate Install Time | 5 minutes |
| Power Type | Solar Power or Rechargeable via Micro USB cord. 3.7V 18650 Lithium Ion Cell |
| Lighting | Up to 50 lumens (adjustable), 3500K Color Temperature |
| Motion Detection | Adjustable motion detection. Up to 120° field of view. Detection angle dependent on distance from unit. 15’ detection range. |
| Auto Shut-off Time | Adjustable (30s to 2m) via Ring app |
| Operating Conditions | -4°F to 122°F (-20°C to 50°C), Weather Resistant (IP66 rating) |
| Available Colors | Black, White |
| Dimensions | 3.43 in x 2.19 in x 4.0 in (87.0mm x 55.5mm x 101.5mm) |
Warranty Information
The Ring Solar Steplight comes with a 1-year limited warranty. Use of Ring Smart Lighting is subject to the terms found on the official Ring website.
Support
For additional information, troubleshooting guides, and customer assistance, please visit the Ring Smart Lighting support page on the official Ring website. You can find detailed resources and contact options there.