Important Safeguards
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions before using this appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electric shock, do not immerse cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to 'off', then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Scalding may occur if the lid is removed during the brewing cycle.
- The carafe is designed for use with this appliance only. It must never be used on a range top.
- Do not place a hot carafe on a wet or cold surface.
- Do not use a cracked carafe or a carafe having a loose or weakened handle.
- Do not clean carafe with cleansers, steel wool pads, or other abrasive material.
Components
Familiarize yourself with the parts of your Mr. Coffee Digital Easy Measure 12-Cup Programmable Coffee Maker.
- A. Control Panel with Digital Display
- B. Water Reservoir with Easy Measure Markings
- C. Brew Basket
- D. Filter Basket Holder
- E. Glass Carafe with Easy Measure Markings
- F. Warming Plate
- G. Easy Measure Coffee Scoop
- H. Water Filtration System (optional, replacement cartridges sold separately)
Image: Front view of the Mr. Coffee Digital Easy Measure 12-Cup Programmable Coffee Maker, showing the control panel, digital display, glass carafe, and included measuring scoop.
Image: Side view of the Mr. Coffee Digital Easy Measure 12-Cup Programmable Coffee Maker, highlighting its compact design.
Before First Use
Before using your coffee maker for the first time, it is recommended to clean all removable parts and run a full brewing cycle with water only.
- Wash the carafe, brew basket, and measuring scoop in warm, soapy water. Rinse thoroughly.
- Fill the water reservoir to the 12-cup mark with fresh, cold water.
- Place the empty brew basket into the filter basket holder. Do not add coffee grounds or a paper filter.
- Place the empty carafe on the warming plate.
- Plug the coffee maker into an electrical outlet.
- Press the 'BREW NOW' button to start a brewing cycle with water only.
- Once the cycle is complete, discard the water from the carafe.
- Unplug the appliance and allow it to cool.
Setup
Proper setup ensures optimal performance and coffee taste.
- Place the coffee maker on a flat, stable surface.
- Ensure the power cord is not touching any hot surfaces or hanging over the edge of the counter.
- If using the optional water filtration system, install the cartridge according to its specific instructions before adding water to the reservoir.
Operating Instructions
Brewing Coffee
Follow these steps for a standard coffee brew:
- Open the top lid of the coffee maker.
- Fill the glass carafe with the desired amount of fresh, cold water. Use the Easy Measure markings on the carafe for accuracy.
- Pour the water from the carafe into the water reservoir. The reservoir also has color-coded Easy Measure markings to guide you.
- Place a 12-cup basket-style paper filter into the brew basket.
- Add the desired amount of ground coffee into the filter. Use the Easy Measure coffee scoop, which has color-coded markings corresponding to the water levels, to ensure the correct coffee-to-water ratio.
- Close the top lid securely.
- Ensure the empty carafe is placed correctly on the warming plate.
- Press the 'BREW NOW' button. The 'BREW' indicator light will illuminate, and the brewing cycle will begin.
- Once brewing is complete, the coffee maker will automatically switch to the 'WARMER ON' mode.
Programming Brew Later
Set your coffee maker to brew at a specific time:
- Prepare the coffee maker for brewing as described in the 'Brewing Coffee' section (water, filter, coffee grounds, carafe in place).
- Press the 'HOUR' and 'MIN' buttons to set the current time.
- Press the 'BREW LATER' button. The 'BREW LATER' indicator light will flash.
- Use the 'HOUR' and 'MIN' buttons to set your desired brew time.
- Press the 'BREW LATER' button again to confirm. The 'BREW LATER' indicator light will stop flashing and remain illuminated.
- The coffee maker will automatically start brewing at the programmed time.
Grab-a-Cup Auto Pause
This feature allows you to pour a cup of coffee before the brewing cycle is complete. Simply remove the carafe from the warming plate. The brewing will pause temporarily. Return the carafe to the warming plate within 30 seconds to resume brewing and prevent overflow.
Blooming Feature
The blooming feature presoaks the coffee grounds before the main brewing cycle. This process allows the coffee to degas, resulting in a fuller flavor and improved taste. This feature is automatic and does not require manual activation.
Freshness Indicator
The illuminated 4-Hour Freshness Indicator on the display shows how long it has been since the coffee was brewed, up to 4 hours. This helps ensure you enjoy your coffee at its optimal freshness.
Maintenance
Cleaning
Regular cleaning helps maintain the performance and longevity of your coffee maker.
- Daily Cleaning: After each use, discard the used coffee filter and grounds. Wash the carafe, brew basket, and measuring scoop in warm, soapy water. Rinse thoroughly and dry. The carafe and brew basket are top-rack dishwasher safe.
- Exterior Cleaning: Wipe the exterior surfaces of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Decalcifying: Mineral deposits (calcium) can build up in your coffee maker over time, affecting performance. When the 'CLEAN' indicator light illuminates, it is time to decalcify.
Decalcifying Procedure:
- Pour 4 cups of undiluted white household vinegar into the water reservoir.
- Place an empty paper filter in the brew basket and close the lid.
- Place the empty carafe on the warming plate.
- Press the 'CLEAN' button. The 'CLEAN' indicator light will illuminate, and the cleaning cycle will begin.
- Allow the cycle to complete. The coffee maker will automatically shut off.
- After the cleaning cycle, run two full brewing cycles with fresh, cold water only to rinse out any remaining vinegar.
Water Filtration System
The 2-step Advanced Water Filtration System helps reduce impurities like calcium and chlorine for better-tasting coffee. Replacement cartridges are sold separately and should be changed regularly according to the filter's instructions, typically every 30 days or 30 brewing cycles, whichever comes first.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee does not brew. | Coffee maker not plugged in; 'BREW NOW' not pressed; 'BREW LATER' set for future time; water reservoir empty. | Ensure unit is plugged in. Press 'BREW NOW'. Check 'BREW LATER' setting. Fill water reservoir. |
| Coffee overflows from brew basket. | Too much coffee grounds; filter not seated correctly; carafe not on warming plate; decalcification needed. | Reduce coffee grounds. Ensure filter is properly seated. Place carafe on warming plate. Perform decalcification. |
| Coffee tastes weak or too strong. | Incorrect coffee-to-water ratio; old coffee grounds; decalcification needed. | Adjust coffee grounds or water amount using Easy Measure system. Use fresh coffee. Perform decalcification. |
| 'CLEAN' light is on. | Indicates mineral buildup. | Perform the decalcifying procedure as outlined in the 'Maintenance' section. |
| Grab-a-Cup Auto Pause drips. | Carafe removed for too long. | Return carafe to warming plate within 30 seconds to prevent dripping. |
Specifications
- Model Number: BVMC-RF300
- Capacity: 12-Cup
- Dimensions: 11.3"D x 9.4"W x 14.6"H
- Weight: 6.3 pounds
- Special Features: Programmable, Thermal (warming plate), Easy Measure System, Blooming Feature, 4-Hour Freshness Indicator, Grab-a-Cup Auto Pause
- Manufacturer: Mr. Coffee
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Mr. Coffee website. Keep your purchase receipt as proof of purchase for any warranty claims.
