DOREL ASIA Bertini Penn Dresser Topper Instruction Manual

1. Introduction

Thank you for choosing the DOREL ASIA Bertini Penn Dresser Topper. This instruction manual provides important information regarding the safe assembly, use, and maintenance of your dresser topper. Please read this manual thoroughly before assembly and retain it for future reference.

Product Overview

The Bertini Penn Dresser Topper is designed to convert the Bertini Penn 9-Drawer Dresser (sold separately, Model DL1747-1) into a convenient changing station. It features a sturdy wood construction with a gray sand finish, two side storage compartments, and a central area to accommodate a standard size changing pad (sold separately). The topper includes a felt-lined bottom to protect the dresser surface.

Safety Information

• WARNING: This dresser topper is designed to be securely fastened to the Bertini Penn 9-Drawer Dresser (DL1747-1). Do not use this topper on any other dresser or surface unless explicitly stated by the manufacturer.
• WARNING: Always use the provided hardware to secure the topper to the dresser. Failure to do so may result in tipping or injury.
• WARNING: Never leave a child unattended on the changing station. Always keep one hand on your child.
• Ensure all assembly hardware is tightened securely before use. Periodically check and re-tighten hardware as needed.
• Keep small parts and plastic bags away from children during assembly.
• Discontinue use if any part of the topper is broken, damaged, or missing. Contact customer support for replacement parts.

2. Parts List

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact DOREL ASIA customer support.

• Bertini Penn Dresser Topper Unit (1)
• Mounting Hardware (screws, brackets, or similar, as supplied)

Note: The Bertini Penn 9-Drawer Dresser (DL1747-1) and a standard size changing pad are sold separately and are required for full functionality.

3. Setup and Assembly

Follow these steps carefully to assemble and secure your dresser topper.

Required Tools (Not Included):

• Phillips head screwdriver

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratching. Verify all parts listed in Section 2 are present.
2. Inspect Topper: Examine the dresser topper unit for any damage or defects. The topper features a central compartment for a changing pad and two side compartments for storage.

Figure 3.1: Bertini Penn Dresser Topper unit with compartments.

3. Position Topper on Dresser: Carefully lift the dresser topper and place it centered on top of the Bertini Penn 9-Drawer Dresser (DL1747-1). Ensure the felt-lined bottom is in contact with the dresser surface to prevent scratches.
4. Secure Topper to Dresser: Locate the pre-drilled holes on the underside of the dresser topper and the corresponding locations on the top surface of the dresser. Using the provided mounting hardware (screws), securely fasten the topper to the dresser. Do not overtighten.

Figure 3.2: Dresser Topper installed on the Bertini Penn 9-Drawer Dresser.

5. Place Changing Pad: Once the topper is securely attached, place a standard size changing pad (sold separately) into the central compartment of the topper.

4. Operating Instructions

The Bertini Penn Dresser Topper provides a dedicated and organized space for changing your baby.

• Changing Area: The central compartment is designed to hold a standard changing pad. Always ensure the changing pad is properly seated and secure before placing your baby on it.
• Storage Compartments: Utilize the two side compartments to keep essential changing supplies such as diapers, wipes, creams, and extra clothing within easy reach. This helps maintain a safe changing environment by minimizing the need to turn away from your baby.
• Safety First: Always keep one hand on your baby while they are on the changing station. Never leave your baby unattended.

5. Maintenance and Care

Proper care will help maintain the appearance and longevity of your dresser topper.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or furniture polish that may damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or damage to the wood finish.
• Inspection: Periodically inspect the dresser topper and its mounting hardware for any signs of wear, damage, or looseness. Re-tighten any loose screws.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the finish.

Figure 5.1: Detail of the gray sand finish.

6. Troubleshooting

If you encounter any issues with your dresser topper, please refer to the following common solutions.

• Topper feels unstable: Ensure all mounting hardware is securely tightened. Verify the topper is correctly aligned and centered on the dresser.
• Missing or damaged parts: Do not attempt to use the product if parts are missing or damaged. Contact DOREL ASIA customer support for assistance.
• Scratches on dresser: The topper includes a felt-lined bottom to prevent scratches. Ensure the felt is intact and properly positioned. Avoid sliding the topper across the dresser surface.

7. Specifications

Figure 7.1: Bertini Penn Dresser Topper as part of a complete nursery collection.

8. Warranty and Support

For warranty information, replacement parts, or any questions not covered in this manual, please contact DOREL ASIA customer support. Keep your purchase receipt for warranty claims.

DOREL ASIA Customer Support:
Please refer to the contact information provided with your product packaging or visit the official DOREL ASIA website for current support details.