SHIMANO ST-R7025

Download PDF
Contents

SHIMANO 105 ST-R7025 Hydraulic STI Shifter and Disc Brake Caliper Instruction Manual

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your SHIMANO 105 ST-R7025 Hydraulic STI Shifter and Disc Brake Caliper system. The ST-R7025 levers and BR-R7070 calipers are engineered to deliver responsive shifting and consistent hydraulic braking performance. Designed with improved ergonomics and a shorter lever throw, this system offers enhanced control, particularly beneficial for riders with smaller hands. Please read this manual thoroughly before use to ensure safe and optimal performance.

Safety Information

Always prioritize safety when working with bicycle components. Improper installation or maintenance can lead to serious injury or damage to your bicycle. If you are unsure about any procedure, consult a professional bicycle mechanic.

  • Wear appropriate safety gear, including eye protection, during installation and maintenance.
  • Ensure all bolts are tightened to the manufacturer's specified torque values. Over-tightening or under-tightening can cause component failure.
  • Use only genuine SHIMANO parts and recommended hydraulic fluid for maintenance.
  • Regularly inspect your brake system for wear, damage, or leaks. Replace worn components immediately.
  • Test brakes thoroughly in a safe area before riding.

Package Contents

Verify that all components are present in your package:

  • SHIMANO 105 ST-R7025 11-speed Hydraulic STI Shifter (Front/Left)
  • SHIMANO 105 BR-R7070 Disc Brake Caliper
  • Brake Hose (Kit)
  • Brake Hose Color (Kit)
  • Fork Adaptor

Setup

This section outlines the general steps for installing the SHIMANO 105 ST-R7025 shifter and BR-R7070 caliper. Specific torque values and detailed routing instructions can be found in the comprehensive SHIMANO dealer manual.

1. Shifter Installation

Mount the ST-R7025 shifter onto your handlebar. Ensure proper positioning for comfortable reach and control. The lever features reach adjustability to fine-tune its position relative to the handlebar.

SHIMANO 105 ST-R7025 Hydraulic STI Shifter, front view

Image: SHIMANO 105 ST-R7025 Hydraulic STI Shifter. This image shows the ergonomic design of the shifter, which integrates both shifting and braking functions.

2. Caliper Installation

Install the BR-R7070 flat mount disc brake caliper onto your bicycle's fork. Use the provided fork adaptor if necessary. Ensure the caliper is correctly aligned with the disc rotor.

SHIMANO 105 BR-R7070 Disc Brake Caliper with hydraulic hose

Image: SHIMANO 105 BR-R7070 Disc Brake Caliper with hydraulic hose. This image displays the compact flat mount caliper and the hydraulic hose for fluid transfer.

3. Hydraulic Hose Connection and Bleeding

Connect the hydraulic brake hose from the shifter to the caliper. Route the hose appropriately to avoid interference with moving parts. After connection, the hydraulic system must be properly bled to remove any air bubbles, ensuring optimal braking performance. Refer to the SHIMANO technical documentation for detailed bleeding procedures.

Operating Instructions

Shifting

The ST-R7025 lever provides 11-speed shifting for your bicycle's drivetrain. Use the main lever for downshifts (to a smaller cog/chainring) and the smaller inner lever for upshifts (to a larger cog/chainring). The short lever throw ensures crisp and precise gear changes.

Braking

The hydraulic disc brake system offers powerful and consistent stopping power in various conditions. Pull the main lever towards the handlebar to engage the brake. The amount of braking force is proportional to the pressure applied to the lever. Adjust the lever reach to ensure comfortable and effective braking for your hand size.

Maintenance

Regular maintenance is crucial for the longevity and performance of your SHIMANO 105 hydraulic system.

  • Cleaning: Keep the shifters, calipers, and disc rotors clean. Use a mild soap and water solution, avoiding harsh chemicals that could damage seals or finishes.
  • Brake Pad Inspection: Regularly check the wear level of the Ice-Tech brake pads. Replace pads when the friction material is worn down to 0.5mm or less.
  • Brake Fluid Check: Periodically inspect the hydraulic system for any signs of fluid leaks. If the brake lever feels spongy or inconsistent, the system may require bleeding or a fluid change. Use only SHIMANO mineral oil.
  • Hose and Cable Inspection: Check the hydraulic hoses for any kinks, cuts, or abrasions. Ensure all cable and hose routing is secure and free from obstruction.

Troubleshooting

This section addresses common issues you might encounter with your hydraulic shifter and brake system.

  • Spongy Brake Lever: This usually indicates air in the hydraulic system. The system needs to be bled to remove air bubbles.
  • Reduced Braking Power: Check brake pad wear, contamination of pads or rotor, or air in the system. Ensure the rotor is clean and free of oil or grease.
  • Brake Noise (Squealing/Grinding): Can be caused by contaminated pads/rotor, worn pads, or improper caliper alignment. Clean components, replace pads if necessary, and realign the caliper.
  • Poor Shifting Performance: Check for proper cable tension, derailleur alignment, and ensure the shifter is securely mounted.

For persistent issues, consult a professional bicycle mechanic.

Specifications

FeatureSpecification
BrandSHIMANO
Model (Shifter)ST-R7025 (11-speed)
Model (Caliper)BR-R7070
ActuationHydraulic
Lever AdjustabilityReach
Brake Mount TypeFlat Mount
ColorBlack
Exterior FinishAluminum
Handle MaterialAluminum
UPC689228984844
Part NumberIR7025DLF4SC100A

Warranty

This SHIMANO product is covered by a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official SHIMANO warranty documentation included with your purchase or visit the official SHIMANO website. Keep your proof of purchase for warranty claims.

Support

For further assistance, technical support, or to locate an authorized service center, please contact SHIMANO directly or visit their official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.