ECHOGEAR Universal Large TV Stand User Manual

1. Introduction

Thank you for choosing the ECHOGEAR Universal Large TV Stand. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV stand. Please read all instructions carefully before assembly and retain this manual for future reference.

2. Safety Information

• Weight Capacity: This stand is designed for TVs weighing up to 100 lbs (45.3 kg). Do not exceed this weight limit.
• TV Size Compatibility: Compatible with TVs from 49 inches to 77 inches.
• Stability: Ensure the stand is placed on a stable, level surface. Uneven surfaces can cause instability and potential tipping.
• Children and Pets: Keep children and pets away from the assembly area. Small parts can be a choking hazard.
• Tools: Use appropriate tools as specified in the assembly instructions. Do not overtighten screws.
• UL Listed: This product is UL listed, ensuring it meets specific safety standards.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact ECHOGEAR customer support.

• TV Stand Legs (2)
• TV Mounting Brackets (2)
• Base Feet (2)
• Hardware Kit (various screws, washers, spacers for TV attachment)
• Soundbar Isolation Pads (2)
• Rubber Grippy Pads for Base
• Hex Key and Phillips Screwdriver (included)

4. Setup and Installation

Follow these steps for a secure and efficient installation of your ECHOGEAR TV stand. It is recommended to have a second person assist with lifting the TV.

4.1. Prepare Your TV

Carefully place your TV face-down on a soft, clean surface to prevent scratches. Ensure the surface is large enough to support the TV.

4.2. Assemble Brackets

Attach the TV Mounting Brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Refer to your TV's manual for specific VESA mounting hole patterns. The stand supports VESA patterns down to 200x200.

Image: Step 1 of assembly, showing a person attaching the vertical brackets to the TV's back panel.

4.3. Attach Stand Legs to Brackets

Connect the TV Stand Legs to the installed TV Mounting Brackets. Secure them using the provided hardware. Ensure they are firmly attached.

Image: Step 2 of assembly, illustrating the attachment of the stand legs to the TV's mounting brackets using a screwdriver.

4.4. Attach Base Feet

Secure the Base Feet to the bottom of the TV Stand Legs. These provide stability and support for the TV. Apply the grippy rubber pads to the underside of the base feet to prevent scratching furniture and ensure stability.

Image: Step 3 of assembly, showing a person securing the base feet to the bottom of the stand legs.

4.5. Final Placement

With assistance, carefully lift the TV and place it on your desired furniture. Ensure the stand is centered and stable. The stand's design allows for placement on narrow furniture or in corners.

Image: A TV stand positioned in a corner, demonstrating ample space for a soundbar and gaming consoles beneath the TV.

5. Operating Instructions

5.1. Height Adjustment

The ECHOGEAR TV stand offers up to 8.5 inches of height adjustment. To adjust the height, carefully loosen the securing screws on the vertical stand legs, slide the TV to the desired height, and then firmly retighten the screws. Always ensure both sides are adjusted evenly and securely fastened before releasing the TV.

Image: A visual representation of the TV stand's height adjustment mechanism, indicating an adjustment range of up to 8.5 inches.

5.2. Soundbar Placement

The stand is designed to accommodate soundbars beneath the TV. Use the included soundbar isolation pads by placing them on top of the stand's base feet before positioning your soundbar. These pads help prevent vibration and improve sound quality.

Image: A close-up of a soundbar isolation pad and a TV setup with a soundbar, illustrating how the pads reduce vibration.

6. Maintenance

• Cleaning: Wipe the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure.
• Damage: If any part of the stand becomes damaged, discontinue use and contact ECHOGEAR customer support for replacement parts or advice.

7. Troubleshooting

Issue: TV feels wobbly or unstable.

Solution: Ensure all screws are securely tightened. Verify the TV is within the specified weight limit. Check that the stand is on a flat, level surface. The stand features solid steel construction and grippy pads for stability.

Image: A close-up view of the TV stand's leg, highlighting its solid steel construction and grippy pads designed for wobble-free stability.

Issue: TV does not fit the stand.

Solution: Confirm your TV size is between 49 and 77 inches and its weight is under 100 lbs. Check your TV's VESA mounting pattern against the stand's compatibility. The stand is designed to be universally compatible with most TVs in the specified size range.

Issue: Difficulty with assembly.

Solution: Review the assembly steps carefully. Ensure you are using the correct hardware for your TV's VESA pattern. ECHOGEAR provides all necessary hardware and tools. If issues persist, contact customer support.

8. Specifications

Image: A diagram illustrating the minimum (23.5 inches) and maximum (32 inches) height of the TV stand, along with base dimensions (2.75 inches wide, 14 inches long).

9. Warranty and Support

ECHOGEAR stands behind its products. For any questions, assistance with installation, or troubleshooting, ECHOGEAR professionals are available 7 days a week. Please refer to the product packaging or the official ECHOGEAR website for specific warranty details and contact information.

As part of ECHOGEAR's commitment to the environment, a tree is planted for every TV stand sold, in partnership with The Carbon Offset Company.