1. Product Overview
The Taidacent 12-Way 10A Slip Ring Power Connector is an electrical device designed for continuous transmission of power and signals across a rotating interface. This component facilitates electrical connection between stationary and rotating parts, enabling 360-degree rotation without interruption. It is suitable for various high-power equipment, including induction cookers and small wind turbines, where reliable rotational electrical contact is essential.
2. Specifications
| Feature | Detail |
|---|---|
| Number of Channels | 12 |
| Current Rating | 10A per channel |
| Voltage Range | 0-240V (DC/AC) |
| Shell Material | Engineering Plastic |
| Insulation Resistance | 500MΩ@250VDC/AC |
| Working Temperature | -40 °C to 80 °C |
| Working Humidity | 0～85%RH |
| Electrical Noise | <10mΩ@6VDC, 50mA, 5RPM |
| Pressure Resistance | 800VDC@50Hz, 10s |
| Insulation Strength | 300VAC@50Hz, 60s |
| Speed Range | 0 ~ 250 RPM |
| Contact Material | Precious metal (gold-gold) |
| Ring Material | Gold plating on copper surface, AU≥30U, R<0.2 |
| Torque | <0.06N.m |
| Wire Length | 150~250mm |
| Protection Level | IP51 |
| Item Weight | 5.1 ounces |
| Package Dimensions | 7.01 x 4.8 x 2.05 inches |
3. Installation
The Taidacent 12-Way 10A Slip Ring is designed for flexible installation, with the rotating end and the stationary end being interchangeable. Proper mounting and wiring are crucial for optimal performance.
3.1 Dimensions and Mounting
Refer to the technical drawing below for precise dimensions and mounting hole specifications. Ensure adequate clearance for rotation and wire connections.
Image Description: This technical drawing illustrates the dimensions of the Taidacent 12-Way 10A Slip Ring Power Connector. It includes a top-down view showing mounting hole details: six holes with a diameter of 5.4mm, evenly distributed on a 42mm diameter circle. The outer diameter is 50mm, and the inner diameter is 40mm. A side view provides overall dimensions, indicating a total length of 74mm, a main body diameter of 30mm, and a rotor side diameter of 15mm. Labels clearly identify the rotor wire and stator wire connections.
3.2 Wiring
Connect the rotor wires to the rotating part of your application and the stator wires to the stationary part. Ensure all connections are secure and properly insulated to prevent short circuits and ensure reliable operation. Observe the specified voltage and current limits for each channel.
4. Operation
Once installed and wired correctly, the slip ring will provide continuous electrical connectivity during 360-degree rotation. Ensure the operating environment adheres to the specified temperature and humidity ranges to maintain optimal performance and product longevity. The maximum rotational speed should not exceed 250 RPM.
5. Maintenance
The Taidacent 12-Way 10A Slip Ring Power Connector is a sealed unit and generally requires no specific user maintenance. To ensure continued reliable operation, regularly inspect the external wiring for any signs of wear or damage. Keep the operating environment clean and free from excessive dust or moisture, which could compromise the IP51 protection level.
6. Troubleshooting
If the slip ring is not functioning as expected, consider the following:
- No Power/Signal Transmission: Verify all electrical connections are secure and correctly wired. Check for continuity in the connected circuits.
- Intermittent Connection: Ensure the rotational speed is within the specified range (0-250 RPM). Check for any physical obstructions or excessive vibration that might affect contact.
- Overheating: Confirm that the current draw does not exceed 10A per channel and that the total power consumption is within the device's limits. Ensure the ambient temperature is within the -40 °C to 80 °C operating range.
For persistent issues, contact customer support.
7. Support and Warranty
For product support, technical assistance, or warranty inquiries, please refer to the seller's contact information provided at the point of purchase or consult the original product documentation. Specific warranty terms may vary by region and retailer.