Wuloo Wireless Driveway Alarm Instruction Manual

Introduction

This manual provides comprehensive instructions for the Wuloo Wireless Driveway Alarm system, a long-range motion sensor alert system designed to enhance home security. Please read this manual carefully before using the product to ensure proper setup and operation.

Image: The Wuloo Wireless Driveway Alarm system, featuring four brown motion sensors and a black receiver unit with a digital display.

Product Features

• Reliable & Dependable: Guaranteed 1/3-mile long range (1760 ft; 536m) tested in real-world settings with trees, buildings, walls, and vehicles for an accurate measure of wireless range. Weatherproof motion sensors—works well in rain or snow!


Image: An illustration demonstrating the sensor's 1/3 mile wireless transmission range and its ability to function in various weather conditions.

• Multi-functional Receiver: The included receiver also works as a clock and alarm, customize your chimes, volumes, and more!


Image: A close-up of the receiver unit highlighting its various functions including chime selection, volume control, mute, clock, and alarm.

• Reliable & Expandable Sensor: The sensor is equipped with a rechargeable battery for up to 12 months on a full charge! Easily adjust the sensor’s sensitivity to avoid interference like leaves or small animals, or expand your security zone to up to 8 additional sensors!


Image: A visual guide to the four sensitivity levels of the sensor, indicating how detection range changes for different objects.



Image: A diagram showing how one receiver can connect with up to eight sensors to cover a large property.

• Super Easy To Install And Customize: Install this wireless outdoor motion alert system in just a few minutes! Simply place your sensor(s) (expands up to 8) anywhere on your property, and get a customized in-home chime the second a person, vehicle or large animal moves within 30 feet of your detection zone! For more information, please read the included instructions and Quick Start Guide carefully before use.
• Wuloo Brand: Wuloo are specialized in FM / ASK /FSK wireless technology for more than 20 years. Package equipped with quick start guide and detailed manual.

Setup and Installation

Follow these steps to set up and install your Wuloo Wireless Driveway Alarm system:

1. Step 1: Confirm Sensor Power
   Wave your hand slowly in front of the sensor eye to check if there is a red light. This confirms the sensor has power. If no red light appears, press and hold the POWER button for 3+ seconds to turn on the sensor. (Note: The sensor eye will flash red light 3 times while turning on, and 1 time while turning off.)
2. Step 2: Pairing Testing
   Connect the receiver to the power outlet. Wave your hand slowly in front of the sensor. While the receiver is receiving the signal, the corresponding LED indicator will flash and a ring tone will sound. The screen will also display the corresponding channel number, meaning they can work normally.
3. Step 3: Charge the Sensor
   Please note that sensors are only charged to about 20% power when they leave our factory. Please charge the sensor first before installing. A full charge can last up to 12 months.
4. Step 4: Install the Sensor
   Please install the sensor in a place that avoids direct sunlight from entering the sensor eye. For better function, you can adjust the angle of the sensor eye by moving the ball joint after you've completed installation.

Image: Visual guide for the initial setup and installation steps of the Wuloo Driveway Alarm.

Image: An internal view of the sensor, highlighting the rechargeable battery and the sensitivity adjustment switches.

Operating Instructions

This section covers additional settings and operational details for your Wuloo Driveway Alarm.

Setting the Channel of Sensor

There are 8 channel settings corresponding to each of the 8 LED indicator lights on the receiver. You can set the channel by adjusting the dip switches inside the sensor. For example, to set this detector to channel 8, adjust the switches according to the Channel Switch Chart.

Pairing the Sensor and Receiver

The sensor will arrive pre-configured to a default pairing setting if you buy the set of sensor and receiver together. You will only need to reset the pairing if you want to change to a different setting, or if you purchased only the sensor without the receiver to expand it.

1. First, set the channel of the sensor.
2. Second, press and hold the PAIRED button on the receiver for 3 seconds to enter pairing mode.
3. Third, wave your hand slowly in front of the sensor, and there should be a red light.
4. Fourth, while the receiver is receiving the signal, the indicator light of the corresponding channel (e.g., number 8) will flash and there will be a ring tone. The screen will also display CH08, which means pairing success.

Time & Alarm Setting

The receiver also includes both clock and alarm functions. Follow these steps to set them:

1. Press the MENU button first time, indicator 1 (Hour number) will flash. Press UP/DOWN to adjust the hour.
2. Press the MENU button second time, indicator 2 (Minute number) will flash. Press UP/DOWN to adjust the minute.
3. Press the MENU button third time, alarm setting (default OFF). Press UP/DOWN to change to ON. The screen will flash a logo when the alarm is ON.
4. Press the MENU button fourth time, indicator 1 will flash. Press UP/DOWN to set the hour of the alarm.
5. Press the MENU button fifth time, indicator 2 will flash. Press UP/DOWN to set the minute of the alarm.
6. Press the MENU button sixth time to quit time & alarm setting.

Melodies Setting for Each Channel & Sensor

This driveway alarm system can be expanded to 8 interconnected sensors. You can set a different melody for each of these sensors to help you judge which sensor has recently detected movement. In total, there are 36 melodies available.

1. In standby mode, press the "PAIRED" button. The screen will display a character sequence like "C101" (C1 means Channel 1, 01 is melody number).
2. Then, press the UP/DOWN button to choose the melody for Channel 1 (Melody number 01-36, means melody 1-36).
3. If you want to set melodies for other channels, you can press the "PAIRED" button to switch between sequences starting with C1-C8. Simply press the PAIRED button; it is a function to switch between channels.
4. After you've finished setting the melodies, you can press the "MENU" button to quit and return to standby mode.

Volume Setting

The melody volume is adjustable. There are 8 volume levels available.

1. In the standby mode (the screen displays the current time), press the UP/DOWN button to adjust the volume.

POWER ON/OFF Button

If you don't want to use the alarm system, we recommend that you press and hold the MENU button for 3 seconds to turn off the receiver rather than unplugging it so that it retains the time setting. If you turn it on, please press and hold the MUTE button again.

Maintenance

To ensure optimal performance and longevity of your Wuloo Wireless Driveway Alarm, keep the sensor lens clean and free from obstructions like dirt, dust, or spiderwebs. Periodically check the battery level of the sensor and recharge as needed. Ensure the sensor is securely mounted to prevent accidental dislodgement.

Troubleshooting

For common issues, refer to the detailed user manual available for download. If problems persist, please contact Wuloo customer support. Wuloo is committed to making our customers' lives safer and more convenient, and offers a "Love it or refund" promise.

Specifications

Warranty and Support

Wuloo is dedicated to providing customers with the best products and service. Your purchase is covered by a 30-day refund/replacement policy. For detailed information, please refer to the official user manuals:

• User Manual (PDF)
• User Guide (PDF)

For any further assistance or inquiries, you can contact Wuloo customer support. We stand by our products with a "Love it or refund" promise.