Intex 28620EP

Intex Handheld Pool Vacuum Cleaner Instruction Manual

Model: 28620EP

Introduction

This manual provides essential information for the safe and efficient operation of your Intex Handheld Pool Vacuum Cleaner. This device is designed to keep your pool and spa clean by effectively removing dirt and debris. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

Always follow basic safety precautions when using this electrical product. To reduce the risk of injury, do not allow children to operate this product unless closely supervised. Ensure the product is fully submerged in water during operation to prevent automatic shutoff and potential damage. The IPX8 waterproof switch provides protection against water submersion, but proper handling is crucial. Do not attempt to open or repair the unit yourself. Refer to the "Troubleshooting" section for common issues or contact customer support.

Package Contents

Verify that all components are present before beginning assembly and operation:

  • 1 x Handheld Pool Vacuum Unit
  • 2 x Interchangeable Brush Heads
  • 1 x USB Charging Cable
  • 1 x 94-inch Telescoping Aluminum Shaft
  • 1 x Shaft Adapter
Intex Handheld Pool Vacuum Cleaner and its components laid out

Image: All components of the Intex Handheld Pool Vacuum Cleaner, including the main vacuum unit, two brush heads, USB charging cable, shaft adapter, and telescoping aluminum shaft.

Diagram showing parts of the Intex Handheld Pool Vacuum Cleaner

Image: A graphic illustrating the different parts of the handheld vacuum: 94" telescoping shaft, USB cable, shaft adapter, and two interchangeable brush heads.

Setup

  1. Charge the Vacuum: Ensure the vacuum is fully charged using the included USB charging cable. The rechargeable Nickel-Metal Hydride batteries provide consistent suction power.
  2. Attach Brush Head: Select and attach the desired interchangeable brush head to the vacuum unit.
  3. Assemble Shaft: Connect the vacuum unit to the 94-inch telescoping aluminum shaft using the shaft adapter.
Hands attaching interchangeable brush heads to the vacuum

Image: Close-up of hands attaching one of the two interchangeable brush heads to the vacuum unit.

Hands connecting sections of the telescoping pole

Image: Hands demonstrating the connection of the telescoping aluminum pole sections.

Hands plugging in the USB charging cable

Image: Hands plugging the USB charging cable into a wall adapter for convenient recharging.

Operating Instructions

  1. Submerge to Activate: Submerge the vacuum completely in the pool or spa. The unit is designed with an automatic shutoff feature that activates when not submerged in water.
  2. Begin Cleaning: Move the vacuum around the pool or spa to clean and remove dirt and debris from the bottom and sides.
  3. Finish Cleaning: When finished, remove the vacuum from the water. The automatic shutoff will deactivate the unit.
Person using the Intex Handheld Pool Vacuum in a rectangular above-ground pool

Image: A person using the Intex Handheld Pool Vacuum Cleaner to clean the bottom of a rectangular above-ground pool.

Man using the Intex Handheld Pool Vacuum in a round inflatable spa

Image: A man using the Intex Handheld Pool Vacuum Cleaner to clean the bottom of a round inflatable spa.

Intex Handheld Pool Vacuum suitable for PureSpas and various pools

Image: The Intex Handheld Pool Vacuum Cleaner, highlighting its suitability for all PureSpas and above-ground pools up to 18 feet in diameter.

Maintenance

  • Clean Filters and Brushes: Regularly clean the filters and brush heads as needed to maintain optimal suction and performance.
  • Drying: Allow the vacuum to dry completely before storing it to prevent mold or mildew growth and to protect internal components.
  • Recharging: Recharge the Nickel-Metal Hydride batteries as necessary to ensure the vacuum is ready for its next use.

Troubleshooting

ProblemPossible CauseSolution
Vacuum does not turn on.Battery is not charged or unit is not submerged.Ensure the vacuum is fully charged. Submerge the unit completely in water to activate the automatic switch.
Weak suction.Filter is clogged with debris.Remove and clean the filter thoroughly. Ensure brush heads are clear of obstructions.
Unit shuts off unexpectedly.Unit is not fully submerged in water.Ensure the vacuum remains fully submerged during operation. The automatic shutoff is a safety feature.

If the problem persists after attempting these solutions, please refer to the Warranty and Support section for further assistance.

Specifications

  • Model: 28620EP
  • Power Source: Battery Powered
  • Battery Type: Nickel Metal Hydride (Ni-MH)
  • Voltage: 3.6 Volts
  • Shaft Length: 94 Inches (Telescoping Aluminum)
  • Product Dimensions: 94 x 10 x 5 inches (L x W x H)
  • Item Weight: 6.6 pounds (approx. 3 Kilograms)
  • Color: Gray
  • Material: Aluminum
  • Special Features: Waterproof (IPX8 switch), Lightweight, Automatic Shutoff (when not submerged)
  • Compatibility: Suitable for all PureSpas and above-ground pools up to 18 feet in diameter.
Graphic displaying key specifications of the Intex Handheld Pool Vacuum

Image: A graphic summarizing key specifications: Compatibility (Spas and pools up to 18ft. diameter), Automatic Shut-off (when not in the water), Rechargeable (Built-in Ni-MH rechargeable batteries), and IPX8 Switch (Waterproof switch for added protection).

Warranty and Support

This Intex Handheld Pool Vacuum Cleaner comes with a Full Warranty. For detailed warranty terms and conditions, please refer to the official Intex website or the warranty card included with your product.

For technical support, replacement parts, or any inquiries not covered in this manual, please visit the official Intex website or contact their customer service department. You may also find additional resources and FAQs on the Intex Brand Store on Amazon.

A digital version of the User Manual (PDF) can be found here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.