1. Product Overview
The KDK N40HS Living Fan is designed to efficiently enhance air flow and cool down its surrounding area. This model features a 40cm plastic blade and is height adjustable from 128cm to 143cm. It incorporates a 1/f Yuragi function for natural breeze simulation, a 3-speed electronic switch, and a 6-hour electronic timer for convenient operation.
Figure 1.1: Front view of the KDK N40HS Living Fan. This image shows the fan's overall design, including the protective grille, central motor housing, adjustable stand, and stable base.
2. Important Safety Instructions
Please read all instructions carefully before using the fan and retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Power Supply: Ensure the fan is connected to a power supply that matches the voltage specified on the rating label (220 Volts).
- Placement: Place the fan on a stable, level surface to prevent it from tipping over. Do not place the fan near curtains or other objects that may be drawn into the fan blades.
- Moisture: Do not use the fan in wet or damp locations, such as bathrooms or areas where water may splash. Never immerse the fan, cord, or plug in water or other liquids.
- Children and Pets: Keep the fan out of reach of children and pets. Do not allow children to play with the fan.
- Foreign Objects: Never insert fingers or any other objects through the grille when the fan is operating.
- Cleaning and Maintenance: Always unplug the fan from the power outlet before cleaning or performing any maintenance.
- Damaged Cord/Plug: Do not operate the fan with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Ventilation: Ensure adequate ventilation around the fan. Do not cover the fan or block its air inlets/outlets.
- Disassembly: Do not attempt to repair or disassemble the fan yourself. Refer all servicing to qualified service personnel.
3. Package Contents
Carefully unpack the box and ensure all the following items are present:
- Fan Motor Unit with Control Panel
- Front Grille
- Rear Grille
- Fan Blade (40cm Plastic Blade)
- Stand Pole (Adjustable Height)
- Base
- Grille Fixing Nut
- Blade Fixing Nut
- Power Cord (Integrated)
- User Manual
Figure 3.1: Rear view of the KDK N40HS Living Fan. This image highlights the motor housing, rear grille, and the integrated power cord exiting from the base.
4. Setup and Assembly
Follow these steps to assemble your KDK N40HS Living Fan:
- Attach the Base: Place the stand pole onto the base and secure it firmly using the provided screws or locking mechanism. Ensure the pole is stable and does not wobble.
- Mount the Motor Unit: Attach the fan motor unit to the top of the stand pole. Align the grooves and secure it with the locking screw or knob.
- Install Rear Grille: Place the rear grille onto the motor unit, ensuring it fits securely over the motor shaft.
- Attach Fan Blade: Slide the plastic fan blade onto the motor shaft. Secure it with the blade fixing nut, turning it clockwise until tight.
- Install Front Grille: Position the front grille over the rear grille, aligning the clips or tabs. Secure both grilles together using the grille fixing nut or clips provided. Ensure the grilles are tightly fastened to prevent accidental contact with the blades.
- Adjust Height: Loosen the height adjustment knob on the stand pole, adjust the fan to your desired height (between 128cm and 143cm), and then firmly tighten the knob.
Figure 4.1: KDK N40HS Living Fan illustrating its adjustable height, shown next to a person for scale. The fan can be adjusted to a maximum height of 163 cm (64 inches).
5. Operation
Familiarize yourself with the control panel to operate your KDK N40HS Living Fan effectively.
Figure 5.1: Detailed view of the KDK N40HS Living Fan's control panel, showing buttons for Power, Speed, 1/f Yuragi, and Timer settings.
Control Panel Functions:
- POWER Button: Press to turn the fan ON or OFF.
- SPEED Button: Cycles through the three available fan speeds (Low, Medium, High). The current speed setting is indicated by an LED light.
- 1/f YURAGI (BLINK) Button: Activates the 1/f Yuragi function, which simulates a natural, gentle breeze by varying the fan speed. Press again to deactivate.
- TIMER Button: Sets the electronic off-timer. Press repeatedly to cycle through timer settings (e.g., 0.5H, 1H, 2H, 4H, 6H). The fan will automatically turn off after the selected duration.
- Oscillation: To activate oscillation, push down the oscillation pin located on top of the motor housing. To stop oscillation, pull the pin up.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your fan.
- Before Cleaning: Always unplug the fan from the power outlet before cleaning.
- Exterior Cleaning: Wipe the exterior surfaces of the fan (base, pole, motor housing) with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
- Grille and Blades: To clean the fan blades and inside the grilles, you may need to carefully remove the front grille. Refer to the assembly instructions in Section 4 for guidance on disassembling the grilles. Wipe the blades and grilles with a soft, damp cloth. Ensure all parts are completely dry before reassembling and operating the fan.
- Storage: If storing the fan for an extended period, clean it thoroughly, cover it to protect from dust, and store it in a dry, cool place.
7. Troubleshooting
If you encounter any issues with your KDK N40HS Living Fan, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; Power button not pressed; Timer activated. | Check if the power cord is securely plugged into a working outlet. Press the POWER button. Check if the timer is set to 0 or off. |
| Weak or no airflow. | Fan speed set too low; Obstruction in front/rear grille; Dirty blades. | Increase the fan speed using the SPEED button. Ensure nothing is blocking the air intake or output. Clean the fan blades and grilles as per maintenance instructions. |
| Unusual noise or vibration. | Loose parts; Fan not on a level surface; Foreign object in grille. | Ensure all assembly parts are securely tightened. Place the fan on a stable, level surface. Unplug the fan and check for any foreign objects caught in the blades or grilles. |
| Fan oscillates but blades do not spin. | Motor issue; Blade obstruction. | Unplug the fan immediately. Check for any obstructions preventing the blades from spinning. If the problem persists, contact customer support. |
If the problem persists after trying these solutions, please contact KDK customer support for assistance.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | KDK |
| Model Name | N40HS |
| Electric Fan Design | Floor Fan (Pedestal Fan) |
| Colour | Titan Grey |
| Power Source | Corded Electric |
| Voltage | 220 Volts |
| Power Consumption | Not explicitly stated, but typically low for this type of fan. |
| Product Dimensions (D x W x H) | 17.7D x 17.7W x 56.3H centimetres (base dimensions, height adjustable) |
| Adjustable Height | 128cm - 143cm |
| Material | Plastic (Blades) |
| Number of Blades | 3 |
| Number of Speeds | 3 |
| Special Features | 1/f Yuragi function, 6 Hour Electronic Timer |
| Control Method | Electronic Touch Buttons |
| Indoor/Outdoor Usage | Indoor |
| Manufacturer | KDK |
| Country of Origin | Singapore |
9. Warranty and Support
The KDK N40HS Living Fan comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any inquiries regarding your product, please contact KDK customer service. Keep your proof of purchase for warranty validation.
Please note: The warranty does not cover damage caused by misuse, accident, unauthorized repair, or normal wear and tear.
