DOGNESS 2L Automatic Electric Pet Water Fountain Instruction Manual

Introduction

Thank you for choosing the DOGNESS 2L Automatic Electric Pet Water Fountain. This device is designed to provide a continuous supply of fresh, filtered water for your pets, encouraging them to drink more and stay hydrated. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Safety Instructions

• Always place the fountain on a level surface to prevent spills.
• For indoor use only. Do not expose to rain or moisture.
• Do not allow pets to chew on the power cord.
• Unplug the fountain before cleaning or performing any maintenance.
• Ensure the power adapter and cord are not damaged. If damaged, discontinue use immediately.
• Keep out of reach of children.
• Never immerse the power adapter in water.
• Only use original DOGNESS replacement parts and accessories.

Package Contents

Please check to ensure all items are present:

• Water Fountain Base
• Water Bowl/Tray
• Submersible Pump
• Filter Tray
• Filter (pre-installed or separate)
• Power Adapter
• Instruction Manual

Product Components: Submersible Pump

This image shows the white DC submersible pump, model JN-206 D01, positioned within the base of the DOGNESS 2L Pet Water Fountain. The pump is connected by a white power cord and features specifications such as DC 5V 110mA, Hmax: 0-50cm, and Qmax: 110L/h, indicating its operational parameters.

Setup Instructions

1. Unpack Components: Carefully remove all parts from the packaging.
2. Rinse Components: Wash the water bowl, filter tray, and fountain base with water. Do not use soap on the filter.
3. Install Pump: Place the submersible pump into the designated area at the bottom of the fountain base. Ensure the power cord is routed through the provided channel.
4. Install Filter: If not already installed, place the filter into the filter tray. Ensure the filter is properly seated.
5. Assemble Fountain: Place the filter tray with the filter onto the fountain base, ensuring it aligns correctly. Then, place the water bowl/tray on top.
6. Fill with Water: Fill the fountain with clean water up to the 'MAX' fill line, typically located inside the base or bowl. Do not overfill.
7. Connect Power: Connect the power adapter to the fountain's power cord and then plug the adapter into a standard electrical outlet.
8. Operation: The fountain should begin operating immediately, circulating water.

Operating Instructions

• Initial Use: After setup, the fountain will start circulating water once plugged in.
• Water Level: Regularly check the water level. Refill when the water level is low to prevent the pump from running dry, which can shorten its lifespan.
• Power On/Off: To turn the fountain on or off, simply plug or unplug the power adapter from the electrical outlet.

Maintenance

Cleaning the Fountain

Regular cleaning is essential for your pet's health and the longevity of the fountain. Clean the fountain at least once a week.

1. Unplug: Disconnect the power adapter from the outlet.
2. Disassemble: Remove the water bowl, filter tray, and pump.
3. Clean Components: Wash all parts (except the filter and power adapter) with warm water and a mild, pet-safe detergent. Rinse thoroughly to remove any soap residue.
4. Clean Pump: Disassemble the pump by removing the impeller cover and impeller. Clean the impeller and its housing with a small brush to remove any hair or debris. Reassemble the pump.
5. Rinse and Reassemble: Rinse all components thoroughly and reassemble the fountain as per the setup instructions.

Filter Replacement

The filter helps remove impurities and odors from the water. Replace the filter every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow.

1. Unplug: Disconnect the power adapter.
2. Remove Old Filter: Remove the water bowl and filter tray, then discard the old filter.
3. Rinse New Filter: Rinse the new filter thoroughly under running water to remove any loose carbon dust.
4. Install New Filter: Place the rinsed new filter into the filter tray.
5. Reassemble: Reassemble the fountain and refill with fresh water.

Troubleshooting

Specifications

• Brand: DOGNESS
• Model Number: 2L fountain
• Capacity: 2 Liters
• Power Source: Corded Electric
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Item Weight: 8 ounces
• Item Package Dimensions L x W x H: 3 x 3 x 3 inches
• Pump Specifications: DC 5V 110mA, Hmax: 0-50cm, Qmax: 110L/h (for model JN-206 D01)
• Target Audience: Cats, Dogs (Small Breed Size), Birds, Small Animals

Warranty and Support

DOGNESS products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please refer to the contact information provided with your purchase or visit the official DOGNESS website. Please retain your proof of purchase for warranty claims.