1. Introduction
This manual provides instructions for the Pic Solution Projet Aerosol Tube, an extensible connection tube designed for use with home aerosol therapy devices. This tube is specifically compatible with Pic AirProjet Plus nebulizers. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Safety Information
The Pic Solution Projet Aerosol Tube is a medical device (CE0068). Adhere to all safety warnings and instructions provided with your aerosol therapy device. Always ensure all components are clean before and after each use to maintain hygiene and effectiveness.
- Read all warnings and instructions for use carefully.
- Keep all instruments clean during treatment.
- Store in a clean, dry place away from direct sunlight and extreme temperatures.
3. Product Overview
The Pic Solution Projet Aerosol Tube is an extensible, flexible tube made from high-quality polypropylene. It serves as a crucial connection between your aerosol therapy device and the nebulizer accessories (e.g., mask, mouthpiece).
Image 3.1: The Pic Solution Projet Aerosol Tube, shown uncoiled. This flexible tube connects the nebulizer to the main unit.
Image 3.2: The Pic Solution Projet Aerosol Tube as supplied in its sealed packaging.
Image 3.3: Rear view of the product packaging, displaying the reference number (02038052000000), CE mark, and UPC barcode (8058090003205).
4. Setup and Connection
The Projet Aerosol Tube is designed for easy connection to compatible aerosol therapy devices, such as the Pic AirProjet Plus. Follow these steps to connect the tube:
- Ensure both the aerosol therapy device and the tube are clean and dry.
- Locate the air outlet port on your Pic AirProjet Plus nebulizer unit.
- Gently push one end of the extensible tube onto the air outlet port until it is securely fitted.
- Connect the other end of the tube to the inlet port of your nebulizer cup or accessory (e.g., mask, mouthpiece).
- Verify that all connections are firm to prevent air leakage during operation.
Image 4.1: Illustrative diagram of the extensible connection tubing, highlighting its use with Pic ultrasonic aerosol therapy devices.
5. Operating Instructions
Once the Projet Aerosol Tube is securely connected to your aerosol therapy device and nebulizer accessories, operate your device according to its specific user manual. The tube facilitates the delivery of aerosolized medication from the main unit to the patient interface.
- Ensure the tube is not kinked or obstructed during use.
- Monitor the connections periodically to ensure they remain secure.
6. Maintenance and Cleaning
Regular cleaning of the Projet Aerosol Tube is essential for hygiene and optimal performance. The extensible polypropylene connection tubing is practical to clean under running water.
- Disconnect the tube from both the aerosol therapy device and the nebulizer accessories after each use.
- Rinse the tube thoroughly under clean, running water.
- Allow the tube to air dry completely in a clean environment before storing or reusing.
- Inspect the tube regularly for any signs of wear, damage, or discoloration. Replace the tube if any deterioration is observed, as the extensible polypropylene connection tubing allows for replacement when needed.
Image 6.1: A person demonstrating the cleaning process of the extensible connection tubing, emphasizing its ease of cleaning under running water.
7. Troubleshooting
If you experience issues during aerosol therapy, consider the following basic troubleshooting steps related to the Projet Aerosol Tube:
- Reduced Airflow: Check if the tube is kinked, twisted, or obstructed. Ensure both ends are securely connected to prevent air leakage.
- Loose Connection: Re-seat the tube firmly onto both the aerosol device and the nebulizer accessory. If the tube consistently comes loose, inspect the connectors for wear.
- Visible Damage: If the tube shows any cracks, holes, or significant wear, it should be replaced immediately to ensure effective and hygienic treatment.
For issues not related to the tube, refer to the user manual of your specific aerosol therapy device.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Pic Solution Projet Aerosol Tube |
| Model Number | 02038052000000 |
| Brand | Pic Solution |
| Material | Polypropylene (extensible) |
| Color | White |
| Item Length | 60 Centimeters (approx.) |
| Dimensions (L x W x H) | 60 x 3 x 3 cm (approx.) |
| Weight | 0.1 grams (approx.) |
| Maximum Pressure | 10 Bars |
| Specific Uses | Home healthcare, aerosol therapy treatments |
| Compatibility | Pic AirProjet Plus aerosol devices |
| Manufacturer | Pikdare S.p.A. |
| Country of Origin | Italy |
9. Warranty and Support
For warranty information or technical support regarding your Pic Solution Projet Aerosol Tube, please refer to the documentation provided with your original aerosol therapy device or contact Pic Solution customer service directly. Contact details can typically be found on the manufacturer's official website or product packaging.
Manufactured by Pikdare S.p.A.
