1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber HOOD PRIMUS PLUS ENERGY HC SC BK 60 kitchen chimney. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Safety Information
- Ensure the electrical supply matches the rating plate specifications.
- Installation must be performed by a qualified technician to prevent electrical hazards or product damage.
- Do not operate the chimney without filters in place.
- Regular cleaning of the filters and oil collector is crucial to prevent fire hazards and maintain suction efficiency.
- Keep children away from the appliance during operation and cleaning.
- Do not flambé under the chimney.
- Ensure adequate ventilation in the room when the chimney is used simultaneously with gas or other fuel-burning appliances.
3. Package Contents
Upon unpacking, verify that all components are present and undamaged:
- 1 x Faber HOOD PRIMUS PLUS ENERGY HC SC BK 60 Kitchen Chimney
- 1 x User Manual
Note: Additional installation accessories like duct pipes may need to be purchased separately.
4. Product Overview
The Faber HOOD PRIMUS PLUS ENERGY HC SC BK 60 is a 60 cm wall-mounted kitchen chimney designed for efficient smoke and odor extraction. It features a curved glass design, auto-clean technology, and touch controls.
Key Features:
- Type: Curved Glass, Wall-mounted, Auto-Clean chamber
- Color: Black finish
- Size: 60 cm, suitable for 2-4 burner stoves
- Suction Capacity: 1500 m³/hr, ideal for kitchens over 200 sqft and heavy frying/grilling
- Filter Type: 2 Baffle Filters, requiring cleaning every 6 months
- Control Type: Touch control
- Noise Level: Maximum 58 dB
- Lighting: 2 x 1.5W LED lamps
- Special Features: Heat Auto-Clean Technology with Oil Collector
Product Dimensions:
The chimney measures approximately 48 cm (Depth) x 60 cm (Width) x 60 cm (Height).
Figure 1: Front view of the Faber kitchen chimney with approximate dimensions (Depth 48cm, Width 60cm, Height 60cm).
Figure 2: Angled view of the Faber HOOD PRIMUS PLUS ENERGY HC SC BK 60 kitchen chimney, showcasing its curved glass design and black finish.
Figure 3: Front view of the chimney highlighting the touch control panel and the Faber logo.
Figure 4: Close-up view of the touch control panel, showing buttons for fan speeds (1, 2, 3), auto-clean, light, and power.
Figure 5: Bottom view of the chimney, clearly showing the two baffle filters and the oil collector tray.
Figure 6: Side profile of the Faber kitchen chimney, illustrating its wall-mounted design and overall structure.
Product Video:
Video 1: An overview of the Faber 60 cm 1500 m³/hr Auto-Clean Curved Glass Kitchen Chimney, highlighting its features and design.
5. Installation
The Faber HOOD PRIMUS PLUS ENERGY HC SC BK 60 is a wall-mounted chimney. Professional installation is highly recommended to ensure proper functioning and safety.
Key Installation Considerations:
- Mounting: Securely mount the chimney on a sturdy wall above your cooking range.
- Ducting: This model supports ducted/vented installation. Ensure proper ducting is in place to vent smoke and odors outside. The manufacturer-supplied duct pipe may be fragile; consider a sturdier 6-inch diameter pipe for better performance and longevity.
- Electrical Connection: Connect to a 220 Volt power supply.
- Clearance: Maintain appropriate clearance between the cooking surface and the chimney as per local regulations and manufacturer guidelines.
6. Operation
The chimney is operated via a touch control panel located on the front of the unit.
Control Panel Functions:
- Power Button: Turns the chimney ON/OFF.
- Fan Speed Buttons (1, 2, 3): Select desired suction power. '1' for low, '3' for high.
- Light Button: Controls the LED lamps.
- Auto-Clean Button: Activates the heat auto-clean function.
- Timer Function: The chimney may feature an auto-off mode (e.g., 1, 2, 3 minutes) to clear residual smoke after cooking. Refer to the specific control panel markings for activation.
For optimal performance, switch on the chimney a few minutes before cooking and let it run for a few minutes after cooking to clear all fumes.
7. Cleaning and Maintenance
Regular cleaning and maintenance are essential for the longevity and efficiency of your chimney.
Baffle Filters:
- The baffle filters should be cleaned every 6 months, or more frequently depending on cooking habits.
- To clean, remove the filters and wash them with warm soapy water or in a dishwasher. Ensure they are completely dry before re-installing.
Heat Auto-Clean Technology:
- Activate the auto-clean function regularly as per the instructions on the control panel. This feature uses heat to melt and collect oil and grease particles into the oil collector.
- After the auto-clean cycle, empty and clean the oil collector tray.
Exterior Cleaning:
- Wipe the exterior surfaces, especially the curved glass and touch panel, with a soft, damp cloth. Avoid abrasive cleaners that may scratch the surface.
- The black glass panel may be prone to fingerprints and requires frequent wiping.
8. Troubleshooting
If you encounter issues with your chimney, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney not turning on | No power supply; loose connection | Check power outlet and connections. Ensure circuit breaker is not tripped. |
| Low suction power | Clogged filters; improper ducting; motor issue | Clean baffle filters. Check ducting for obstructions or leaks. If problem persists, contact customer support. |
| Excessive noise | Loose parts; motor issue; improper installation | Ensure all parts are securely fastened. Verify proper installation. If noise is unusual, contact customer support. |
| Lights not working | Faulty LED lamp; electrical issue | Check connections. If lamps are faulty, contact customer support for replacement. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Faber customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Model | HOOD PRIMUS PLUS ENERGY HC SC BK 60 |
| Brand | Faber |
| Type | Curved Glass, Wall Mounted, Auto-Clean |
| Color | Black |
| Product Dimensions (LxWxH) | 48D x 60W x 60H Centimeters |
| Air Flow Capacity | 1500 Cubic Meters Per Hour (CMPH) |
| Noise Level | 58 Decibels |
| Control Type | Touch |
| Filter Type | Baffle |
| Light Source Type | LED (2 x 1.5W) |
| Voltage | 220 Volts |
| Fuel Type | Electric |
| Item Weight | 7 kg |
| Ventilation Type | Ducted/Vented |
| Special Features | Auto Clean, Touch Control |
| Annual Energy Consumption | 180 Kilowatt Hours Per Year |
10. Warranty and Support
Warranty Information:
- Product Warranty: 1 year
- Motor Warranty: 5 years
Note: The 5-year motor warranty typically requires the chimney to be serviced by Faber authorized personnel twice in the first year. Each service may incur a charge, or an Annual Maintenance Contract (AMC) can be purchased. Failure to adhere to these service requirements may limit the warranty to one year for both the chimney and motor. Please confirm specific terms with Faber customer service.
Customer Support:
For service, support, or warranty claims, please contact Faber customer care:
- Manufacturer/Customer Care Contact: 1800 209 3484
- Marketed by: Franke Faber India Pvt Ltd, 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA
