1. Introduction
This manual provides essential instructions for the safe and efficient use of your ABLEGRID 22V AC-DC Adapter Charger. Please read this manual thoroughly before using the product and retain it for future reference. This power supply is designed to provide stable and reliable power to compatible devices, specifically those requiring 22V DC input, such as the Bosch VCAS010V18 S015WB2200050.
2. Safety Information
Your ABLEGRID adapter is designed with multiple safety features to ensure reliable operation. Adhere to the following guidelines for safe use:
- Ensure the input voltage (AC 100-240V) matches your local power supply.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to severe impacts.
- Do not attempt to open or modify the adapter.
- Unplug the adapter from the power outlet when not in use for extended periods.
This adapter is equipped with:
- Overcharge Protection
- Overcurrent Protection
- Overvoltage Protection
- Short Circuit Protection
The product is CE and RoHS certified, indicating compliance with European safety, health, and environmental protection standards.
Image: The ABLEGRID adapter highlighting its protective features including drop protection, good toughness, and over-temperature protection, ensuring durability and safety.
3. Package Contents
Please verify that all items are present in the package:
- 1 x ABLEGRID 22V AC-DC Adapter Charger
- 1 x Power Cord (approximately 4 feet in length)
Image: The ABLEGRID 22V AC-DC adapter shown with its integrated 4-foot power cord, ready for connection.
4. Setup Instructions
Follow these steps to set up your ABLEGRID adapter:
- Verify Compatibility: Ensure your device requires a 22V DC input and has a compatible barrel connector. Refer to your device's specifications.
- Connect to Device: Insert the barrel connector of the ABLEGRID adapter into the power input port of your device.
- Connect to Power Outlet: Plug the 2-pin main power connector of the adapter into a standard AC 100-240V wall outlet.
- Power On Device: Once connected, power on your device. The adapter will automatically supply power.
Image: A detailed view of the ABLEGRID 22V AC-DC adapter and its coiled power cord, illustrating its compact design and connection readiness.
5. Operating Instructions
The ABLEGRID 22V AC-DC Adapter Charger operates automatically once connected to a power source and a compatible device. It provides a continuous 22V DC output. There are no user-adjustable settings on the adapter itself.
- Always ensure the adapter is securely plugged into both the wall outlet and your device.
- If your device has an on/off switch, use that to control power to the device.
- Disconnect the adapter from the wall outlet before disconnecting it from your device to prevent accidental power surges.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your adapter:
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.
7. Troubleshooting
If you encounter issues with your ABLEGRID adapter, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not receiving power | Adapter not plugged in correctly Wall outlet not functioning Device power input issue Adapter or cable damage | Ensure both ends of the adapter are securely connected. Test the wall outlet with another device. Verify your device's power input port. Inspect adapter and cable for visible damage. Discontinue use if damaged. |
| Adapter feels excessively hot | Overload or poor ventilation Internal fault | Ensure the adapter is not covered and has adequate airflow. Verify device compatibility. If overheating persists, discontinue use. |
| Intermittent power supply | Loose connection Damaged cable or connector | Check all connections for tightness. Inspect the cable and connector for damage. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ABLEGRID |
| Model | VCAS010V18 S015WB2200050 (Compatible) |
| Input Voltage | AC 100-240V (Worldwide AC Input) |
| Output Voltage | 22V DC |
| Connector Type | Barrel Connector |
| Main Power Connector Type | 2 Pin |
| Special Features | Short Circuit Protection, Overcharge Protection, Overcurrent Protection, Overvoltage Protection |
| Certifications | CE, RoHS |
| Power Source | Corded Electric |
9. Warranty and Support
ABLEGRID products are manufactured to high-quality standards. For specific warranty details regarding your purchase, please refer to the documentation provided at the time of purchase or contact your retailer.
For further assistance, technical support, or inquiries, please visit the official ABLEGRID store or contact their customer service through the platform where the product was purchased.
Visit the ABLEGRID Store for more information.
