Introduction
This manual provides essential instructions for the safe and proper assembly, operation, and maintenance of your Best Choice Products 6ft Pre-lit Alpine Pencil Christmas Tree. Please read this manual thoroughly before assembly and retain it for future reference.
Image: The 6ft Pre-lit Alpine Pencil Christmas Tree, illuminated with warm white LED lights.
Safety Information
- Ensure all electrical connections are secure and properly insulated.
- Do not overload electrical outlets.
- Keep the tree away from heat sources, open flames, and flammable materials.
- This product is intended for indoor use. If used outdoors, ensure all electrical components are protected from moisture and weather elements.
- Always unplug the tree when not in use or before performing any maintenance.
- Keep small children and pets away from the tree during assembly and operation to prevent accidents.
Package Contents
Verify that all components are present before beginning assembly:
- Pre-lit Christmas Tree Sections (typically 2-3 sections for a 6ft tree)
- Durable Metal Stand
- Power Adapter/Cord
- Spare Bulbs and Fuses (may be included)
Setup and Assembly
Assembly of your pre-lit Christmas tree is designed to be straightforward. Follow these steps for proper setup:
- Prepare the Stand: Place the durable metal stand on a flat, stable surface. Ensure the stand is fully open and secure.
- Assemble the Base Section: Insert the largest tree section (bottom section) into the center hole of the metal stand. Tighten any screws on the stand to secure the tree section firmly.
- Connect Middle and Top Sections: Carefully insert the next tree section into the top of the previously assembled section. Repeat for any remaining sections. Ensure the sections are fully seated.
- Connect Electrical Wires: Locate the electrical connectors between each tree section. Connect them securely to ensure the lights will illuminate throughout the tree. For the 6ft model, there are typically connections between the sections for the pre-strung lights.
- Fluff the Branches: Starting from the bottom section and working your way up, gently spread out the branches and individual branch tips. Adjust them to fill any gaps and create a full, natural appearance. This process may take 30-45 minutes for a 6ft tree.
Image: Detailed view of the tree's branch tips and pre-lit LED lights.
Image: Close-up of the tree trunk, highlighting its natural appearance.
Operating Instructions
Your pre-lit Christmas tree is designed for simple operation:
- Power Connection: Once the tree is fully assembled and fluffed, connect the power adapter to the main electrical cord of the tree.
- Plug In: Plug the power adapter into a standard electrical outlet. The warm white LED lights should illuminate.
- Timer Usage: If you wish to use a timer (not included), plug the tree's power adapter into the timer, and then plug the timer into the wall outlet. Follow the timer's instructions for setting schedules.
- Unplug When Not in Use: For safety and energy conservation, always unplug the tree when leaving the house or going to bed.
Maintenance
Proper care will extend the life of your artificial Christmas tree:
- Cleaning: Dust the tree periodically with a soft, dry cloth or a feather duster. Do not use liquid cleaners or solvents.
- Light Replacement: If a light bulb burns out, replace it promptly with a spare bulb of the same type and wattage (if provided). Refer to the light string's label for specifications.
- Storage: Before storing, ensure the tree is completely dry. Disassemble the tree in reverse order of assembly. Gently compress the branches and store the sections in their original box or a dedicated tree storage bag in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights are not working. | Loose connection, burnt-out bulb, or blown fuse. | Check all electrical connections between tree sections and to the power outlet. Replace any burnt-out bulbs or blown fuses. |
| Tree is unstable. | Stand not fully open or screws not tightened. | Ensure the metal stand is fully extended and all securing screws are tightened. Place on a level surface. |
| Branches appear sparse. | Branches not properly fluffed. | Spend additional time fluffing and shaping each individual branch tip to fill out the tree. |
Specifications
- Brand: Best Choice Products
- Model Number: SKY5337
- Dimensions: 30" (Diameter) x 72" (Height) (including stand)
- Color: Green
- Material: Polyvinyl Chloride (PVC)
- Item Weight: 7 Pounds
- Tree Type: Alpine Pine
- Special Feature: Pre-lit with Warm White LED Lights
- Number of Branch Tips: 700
- Number of Lights: 250
- Base Type: Metal Stand
- Recommended Use: Indoor
- UPC: 842957118052
Image: Product dimensions for the 6ft tree.
Warranty and Support
For warranty information or customer support, please refer to the product packaging or contact Best Choice Products directly through their official website or customer service channels. Keep your purchase receipt for warranty claims.
