1. Product Overview
The Lepro LE Remote Controller is designed for convenient and intuitive control of compatible electronic devices, primarily LED lighting systems. It offers a user-friendly interface for adjusting various settings from a distance.
Figure 1: Front view of the LE Remote Controller, showing its compact design and button layout.
Key Features:
- Convenience: Allows control of various devices from a distance, eliminating the need for physical interaction.
- User-friendly: Features intuitive controls and a straightforward interface for ease of use.
- Compatibility: Designed to be compatible with a range of electronic devices, offering versatile control.
2. Setup
2.1 Battery Installation
The LE Remote Controller requires one Lithium Metal battery for operation. Follow these steps to install the battery:
- Locate the battery compartment on the back of the remote controller.
- Slide open the battery cover in the direction indicated by the arrow.
- Insert one Lithium Metal battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Note: Ensure the battery is inserted with the correct polarity to prevent damage to the remote controller.
3. Operating Instructions
This section details the functions of each button on the LE Remote Controller.
Figure 2: Labeled diagram of the LE Remote Controller, highlighting key functional areas.
| Button/Area | Function |
|---|---|
| Brightness +/- (Sun icons) | Adjusts the brightness level of the connected LED lights. The sun with rays increases brightness, the sun without rays decreases brightness. |
| OFF / ON | Turns the connected LED lights off or on. |
| R, G, B, W | Directly selects Red, Green, Blue, or White color for the LED lights. |
| 20 Static Colours (Color circles) | Selects one of 20 preset static colors for the LED lights. |
| Speed +/- (Up/Down arrows) | Adjusts the speed of dynamic lighting modes. Up arrow increases speed, down arrow decreases speed. |
| DIY1 - DIY6 | Allows users to save and recall 6 custom-mixed colors. To set a DIY color:
|
| Dynamic Modes (QUICK, SLOW, AUTO, FLASH, JUMP3, JUMP7, FADE3, FADE7) | Activates various dynamic lighting effects:
|
4. Maintenance
4.1 Cleaning
To maintain the remote controller's appearance and functionality:
- Wipe the surface with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the surface or internal components.
4.2 Battery Replacement
Replace the battery when the remote's range decreases or it stops responding. Refer to Section 2.1 for battery installation instructions.
4.3 Storage
When not in use for extended periods, store the remote controller in a cool, dry place away from direct sunlight and extreme temperatures. If storing for a very long time, consider removing the battery to prevent leakage.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead or improperly installed battery. | Check battery polarity or replace with a new Lithium Metal battery. |
| Short operating range. | Low battery power; Obstruction between remote and receiver. | Replace battery; Ensure a clear line of sight to the device being controlled. |
| Buttons are sticky or unresponsive. | Dirt or debris under buttons. | Gently clean around the buttons with a soft, dry cloth. Avoid liquids. |
6. Specifications
Figure 3: Dimensions of the LE Remote Controller.
| Feature | Detail |
|---|---|
| Product Dimensions | 5.2 x 2.36 x 0.35 inches (132 x 60 x 9 mm) |
| Item Model Number | 500044 |
| Batteries Required | 1 Lithium Metal battery |
| Manufacturer | LE |
| Brand | Lepro |
| Special Feature | Dimmable |
| Color | RGB |
| Max Number of Supported Devices | 1 |
| Compatible Devices | Bluetooth (Note: This remote is typically used with IR receivers for LED strips. The 'Bluetooth' compatibility may refer to the controlled device's capabilities.) |
7. Warranty and Support
7.1 Warranty Information
Specific warranty details for the LE Remote Controller are typically provided with your purchase documentation or can be found on the official Lepro website. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact Lepro customer support through their official website or the contact information provided with your product packaging.
You may also refer to the official Certificate of Compliance document for additional product information: Certificate of Compliance (PDF)
