VIVOSUN 4L Pump Pressure Sprayer User Manual

Introduction

The VIVOSUN 4L Pump Pressure Sprayer is designed for efficient and versatile application of liquids in your garden and for various cleaning tasks. Its manual pump system provides consistent pressure for uniform spraying, making it suitable for watering plants, applying nutrients, controlling weeds, and managing pests. This manual will guide you through the proper setup, operation, and maintenance of your sprayer to ensure safe and effective use.

Safety Information

General Safety Guidelines

• Always keep the sprayer upright when not in use.
• Do not over-pressurize the sprayer.
• Keep the sprayer away from heat sources and open flames.
• Always wear appropriate protective clothing when using cleaning solutions or chemicals.
• After each use, thoroughly clean the sprayer and dispose of any remaining liquid responsibly.
• Never leave the sprayer unattended during operation.

Package Contents

• 1 x VIVOSUN 4L Pump Pressure Sprayer
• 1 x Adjustable Shoulder Strap
• 3 x Nozzles (Basic, Fan, Dual)

Setup

1. Attaching the Shoulder Strap

1. Locate the attachment points on the sprayer body.
2. Securely fasten both ends of the adjustable shoulder strap to these points. Ensure the strap is adjusted for comfortable carrying.

2. Filling the Tank

1. Unscrew the pump assembly from the top of the tank by rotating it counter-clockwise.
2. Fill the translucent tank with the desired liquid, ensuring not to exceed the maximum fill line (4L or 1 Gallon). The wide opening and funnel design facilitate easy, mess-free filling.
3. Screw the pump assembly back onto the tank, rotating clockwise until securely tightened.

Operating Instructions

1. Building Pressure

1. Ensure the pump handle is unlocked (rotate the lever to unlock).
2. Pump the handle up and down repeatedly to build pressure inside the tank. Continue pumping until resistance is felt, indicating sufficient pressure. Do not over-pressurize.

2. Adjusting the Nozzle

1. The sprayer comes with three interchangeable nozzles: Basic, Fan, and Dual. Select the appropriate nozzle for your task.
2. The main nozzle can be adjusted by twisting it to change the spray pattern from a fine mist to a direct stream.

3. Spraying

1. Aim the nozzle at the target area.
2. Press the trigger on the handle to begin spraying.
3. For continuous spraying, press the switch forward to lock the flow, or lock the handle.

4. Releasing Pressure

1. After use, or if you need to open the tank, always release the internal pressure first.
2. Pull the red pressure-relief valve upwards until the air escapes and the pressure is fully released.

Maintenance

1. Cleaning After Use

1. After each use, especially when using chemicals, rinse the tank thoroughly with clean water.
2. Pump clean water through the nozzle to flush out any residue from the hose and nozzle.
3. Disassemble the nozzle and clean any blockages if necessary.

2. Storage

1. Store the sprayer in a cool, dry place, away from direct sunlight and freezing temperatures.
2. Ensure all pressure is released before storage.

3. Checking Seals

1. Periodically inspect the fluorine rubber sealing ring and other seals for wear or damage to prevent leaks and maintain pressure.
2. Replace worn seals as needed.

Troubleshooting

Common Issues and Solutions

Specifications

Warranty and Support

For warranty information or technical support, please contact VIVOSUN customer service through their official website or the retailer where the product was purchased. Please have your model number (SX) and proof of purchase available.