Korg Kross 2-88-MB 88-key Synthesizer Workstation User Manual

Introduction

This manual provides essential information for the setup, operation, and maintenance of your Korg Kross 2-88-MB 88-key Synthesizer Workstation. Please read this manual thoroughly to ensure proper usage and to maximize the lifespan of your instrument.

Safety Information

Always follow basic safety precautions when using this product to reduce the risk of injury or damage. Keep this manual for future reference.

• Do not expose the unit to rain, moisture, or extreme temperatures.
• Avoid placing the unit near heat sources or in direct sunlight.
• Do not open the unit casing. Refer all servicing to qualified personnel.
• Use only the specified power adapter or batteries.
• Keep out of reach of children.

Package Contents

Verify that all items are present in the package:

• Korg Kross 2-88-MB Synthesizer Workstation
• AC Adapter
• Quick Start Guide
• Owner's Manual (this document)

Setup

1. Power Connection

Connect the supplied AC adapter to the DC IN jack on the rear panel of the Kross 2-88-MB. Plug the adapter into a suitable power outlet. Alternatively, the unit can be powered by 6 AA batteries (not included) for portable use.

2. Audio Output

Connect the L/MONO and R OUTPUT jacks on the rear panel to your amplifier, mixer, or headphones using appropriate cables. Ensure volume levels are set low before powering on.

Image: Rear panel of the Korg Kross 2-88-MB, showing various input/output jacks including power, audio outputs, and USB ports.

3. USB/MIDI Connection

The Kross 2-88-MB features USB MIDI connectivity for integration with a computer or other MIDI devices. Use a standard USB cable to connect the USB B port to your computer for MIDI and audio transfer.

Operating Instructions

1. Power On/Off

Press the POWER button located on the rear panel to turn the unit on or off. Allow a few seconds for the system to boot up.

2. Sound Selection (Program Mode)

The Kross 2-88-MB offers a wide variety of sounds. Use the CATEGORY dial to browse through different instrument types (e.g., Piano, Electric Piano, Organ, Strings, Synth). Once a category is selected, use the VALUE dial or the cursor buttons to select a specific program.

Image: Detail of the Kross 2-88-MB's display and category selection knob, showing sound program browsing.

3. Real-time Controls

Adjust sound parameters in real-time using the dedicated knobs and sliders. These controls can be assigned to various functions such as filter cutoff, resonance, attack, and release, allowing for dynamic sound shaping during performance.

Image: Real-time control section of the Korg Kross 2-88-MB, featuring assignable knobs for sound modification.

4. Performance Pads

The 16 performance pads can be used to trigger samples, chords, or drum patterns. These pads are velocity-sensitive, allowing for expressive control over your performance.

Image: Illuminated performance pads on the Korg Kross 2-88-MB, used for triggering sounds and patterns.

5. Audio Recorder

The built-in audio recorder allows you to record your performances directly to an SD card (not included). This feature is useful for capturing ideas or creating backing tracks.

Maintenance

1. Cleaning

Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the finish.

2. Storage

When not in use, store the Kross 2-88-MB in a dry, dust-free environment. If storing for an extended period, remove batteries to prevent leakage.

Troubleshooting

No Sound

• Check if the unit is powered on.
• Verify that the master volume knob is turned up.
• Ensure audio cables are correctly connected to the output jacks and your amplification system.
• Check the volume levels on your amplifier or mixer.
• If using headphones, ensure they are properly plugged into the PHONES jack.

Unit Does Not Power On

• Confirm the AC adapter is securely connected to both the unit and a working power outlet.
• If using batteries, check if they are correctly inserted and have sufficient charge.

Unexpected Behavior / Freezing

• Try performing a factory reset (refer to the Quick Start Guide for instructions).
• Ensure the latest firmware is installed. Visit the Korg website for updates.

Specifications

Warranty Information

This product is covered by a limited manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Korg website for detailed terms and conditions. Keep your proof of purchase for warranty claims.

Support

For further assistance, technical support, or to download the latest drivers and firmware updates, please visit the official Korg website:

www.korg.com

You may also contact Korg customer service directly through the contact information provided on their website.