ASHATA ASHATAt1qngp7x45 Hard Drive Power Switch Module User Manual

1. Introduction

The ASHATA ASHATAt1qngp7x45 Hard Drive Power Switch Module is designed to provide independent power control for up to four SATA hard drives within a desktop PC. This module allows users to individually power on or off connected hard drives, enhancing system flexibility and power management. It features a robust design with stable power delivery and is suitable for various desktop computer configurations.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x ASHATA Hard Drive Power Switch Module
• 4 x SATA 15-pin Power Supply Cables (approximately 60cm each)
• 4 x Cable Ties
• 1 x Mounting Screw

Image 2.1: Contents of the ASHATA Hard Drive Power Switch Module package.

3. Product Features

• Independent Power Control: Manages power for up to four SATA hard drives individually.
• Stable Power Delivery: Equipped with 8 large-capacity solid capacitors to ensure consistent power input and output.
• Durable Construction: Made from thickened and hardened PC material, designed for high temperature resistance and durability.
• Cascadable Design: Can be cascaded or superimposed to control additional hard disk box devices or fans.
• Standard Connectivity: Utilizes standard SATA 15-pin power supply lines for broad compatibility.

Image 3.1: Front view of the module highlighting the individual switches and capacitors.

Image 3.2: Detail of SATA 15P connectors and solid capacitors for stable power.

4. Installation Guide

Follow these steps to install the ASHATA Hard Drive Power Switch Module into your desktop PC:

1. Prepare Your PC:
   • Power off your computer and unplug it from the wall outlet.
   • Open the computer case to access the internal components.
2. Install the Module:
   • Locate an available PCI slot bracket opening at the rear of your PC case.
   • Insert the ASHATA Hard Drive Power Switch Module into the opening, ensuring the mounting bracket aligns with the screw hole.
   • Secure the module to the PC case using the provided mounting screw.
   

   Image 4.1: The module's form factor for PC case installation.

3. Connect Power Cables:
   • Connect the 15-pin SATA power input connector on the ASHATA module to an available SATA power cable from your PC's power supply unit (PSU).
   • Connect the four provided SATA 15-pin power supply cables to the output ports on the ASHATA module.
   • Connect the other end of these four cables to your SATA hard drives. Each cable corresponds to one switch on the module.
   

   Image 4.2: Connecting SATA power cables to the module and hard drives.

4. Cable Management:
   • Use the provided cable ties to manage and secure the cables, ensuring proper airflow and preventing interference with other components.
5. Final Steps:
   • Close your computer case.
   • Plug in your computer and power it on.

5. Operating Instructions

The ASHATA Hard Drive Power Switch Module features four individual switches, each corresponding to a connected SATA hard drive.

• To power on a connected hard drive, push the corresponding switch to the 'ON' position.
• To power off a connected hard drive, push the corresponding switch to the 'OFF' position.
• The module allows for independent control, meaning you can power on or off any of the four drives without affecting the others.
• For systems requiring more than four controlled devices, multiple ASHATA modules can be cascaded or superimposed.

Image 5.1: Individual switches for controlling hard drive power.

6. Maintenance

To ensure optimal performance and longevity of your ASHATA Hard Drive Power Switch Module, follow these maintenance guidelines:

• Cleaning: Periodically clean the module and surrounding areas inside your PC case to prevent dust buildup. Use compressed air or a soft, dry cloth. Ensure the PC is powered off and unplugged before cleaning.
• Cable Integrity: Regularly check all connected cables for any signs of wear, damage, or loose connections. Replace damaged cables immediately.
• Environmental Conditions: Operate the module within standard PC operating temperatures. Avoid extreme heat or humidity.

7. Troubleshooting

If you encounter issues with your ASHATA Hard Drive Power Switch Module, refer to the following common troubleshooting steps:

• Hard Drive Not Powering On:
  • Ensure the corresponding switch on the module is in the 'ON' position.
  • Verify that all SATA power cables are securely connected to the module, the hard drive, and the PC's power supply.
  • Test the hard drive by connecting it directly to the PC's power supply, if possible, to rule out a drive issue.
  • Check if the PC's power supply is functioning correctly and providing adequate power.
• Module Not Receiving Power:
  • Ensure the main SATA power input cable from the PSU to the module is firmly connected.
  • Confirm that your PC's power supply is operational.
• Intermittent Power to Drives:
  • Check for loose cable connections at all points.
  • Inspect cables for any damage or fraying.
  • Ensure the module is securely mounted and not experiencing any physical stress.

8. Specifications

9. Warranty and Support

ASHATA products are designed for reliability and performance. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please reach out to ASHATA customer service through the official channels provided by your point of purchase.