WAHL KM2 Speed Professional Animal Clipper (Model 1247-0479)

1. Introduction

Thank you for choosing the WAHL KM2 Speed Professional Animal Clipper. This manual provides essential information for the safe operation, maintenance, and care of your new clipper. Please read all instructions thoroughly before first use to ensure optimal performance and longevity of the device.

Package Contents

Verify that all items are present in the package:

• WAHL KM2 Speed Clipper
• Competition Series #10 Blade (1.8 mm)
• Cleaning Brush
• Blade Oil

Image 1.1: WAHL KM2 Speed Professional Animal Clipper with its retail packaging, showing the clipper in pink and the box detailing features like "KM2 2 Speed Animal Clipper Rotary Motor" and "100 Years WAHL Celebration Edition".

2. Important Safety Instructions

To reduce the risk of electric shock, injury, or damage to the appliance, always follow these basic safety precautions:

• Do not use the clipper near water or in wet environments.
• Avoid contact with sensitive skin areas or eyes.
• Exercise caution when using the clipper near the face or neck of the animal.
• Always unplug the device when not in use, before cleaning, or before attaching/detaching parts.
• When grooming animals, prioritize the animal's safety and comfort.
• Keep the appliance out of reach of children.
• Do not operate the clipper with a damaged cord or plug.
• Do not attempt to repair the appliance yourself. Contact qualified service personnel.

Read all instructions carefully before operating the clipper.

3. Setup

3.1 Attaching the Blade

1. Ensure the clipper is unplugged from the power outlet.
2. Align the blade with the clipper head. The WAHL KM2 Speed uses a push-button mechanism for easy blade replacement.
3. Press the blade release button (if applicable, usually on the back of the clipper head) and slide the blade onto the clipper until it clicks securely into place.
4. Gently tug on the blade to ensure it is firmly attached before use.

Image 3.1: A close-up view of the Competition Series #10 blade (1.8 mm) attached to the WAHL KM2 Speed clipper, showing the blade's teeth and the attachment mechanism.

3.2 Power Connection

• Connect the power cord to a suitable electrical outlet.
• Ensure the voltage of your power supply matches the requirements specified on the clipper or its power adapter.

4. Operating Instructions

4.1 Powering On/Off and Speed Settings

The WAHL KM2 Speed clipper features a 2-speed system.

1. To turn the clipper on, slide the power switch to the desired speed setting. The switch typically has positions for "0" (Off), "I" (Low Speed), and "II" (High Speed).
2. Select "I" for lower speed, suitable for sensitive areas or finer work.
3. Select "II" for higher speed, suitable for general body clipping and thicker coats.
4. To turn the clipper off, slide the power switch to the "0" position.

Image 4.1: Front view of the WAHL KM2 Speed clipper, highlighting the ergonomic design and the power switch with speed settings.

Image 4.2: Back view of the WAHL KM2 Speed clipper, showing the rear casing and the cord attachment point.

4.2 Grooming Tips

• Ensure the animal's coat is clean, dry, and free of tangles before clipping.
• Always use a well-oiled blade for smooth operation and to prevent overheating.
• Hold the clipper firmly and move it against the direction of hair growth for an even cut.
• Take breaks during extended grooming sessions to allow the clipper and blade to cool down.
• Use appropriate attachment combs (sold separately) for desired hair lengths.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your clipper.

5.1 Cleaning the Blade

1. After each use, unplug the clipper.
2. Remove the blade from the clipper.
3. Use the provided cleaning brush to remove all hair and debris from the blade teeth and between the cutting surfaces.
4. For thorough cleaning, you may use a blade wash solution (sold separately) according to its instructions.
5. Ensure the blade is completely dry before reattaching or storing.

5.2 Oiling the Blade

Proper lubrication is crucial for blade performance and to prevent overheating.

1. Apply 2-3 drops of WAHL blade oil across the top of the blade teeth while the clipper is running (for a few seconds).
2. Apply 1 drop of oil to each side rail of the blade.
3. Wipe off any excess oil with a clean cloth.
4. Oil the blade before, during (if necessary for long sessions), and after each use.

5.3 Cleaning the Air Filter

The WAHL KM2 Speed features a removable air filter for optimal cooling.

1. Unplug the clipper.
2. Locate the air filter cover, typically at the rear of the clipper.
3. Remove the air filter cover and gently pull out the filter.
4. Clean the filter using the cleaning brush or by rinsing it under cool water. Ensure it is completely dry before reinserting.
5. Reinsert the clean, dry air filter and replace the cover.

Image 5.1: The product box illustrating key features, including "Removable Air Filter for Ease of Cleaning and Maximum Cooling" and "Two Powerful Speeds (2400 & 3000 SPM)".

6. Troubleshooting

7. Specifications

• Brand: Wahl
• Model Number: 1247-0479
• Model Name: WAHL KM2 Speed
• Power Source: Corded Electric
• Motor Type: Rotary Motor
• Speed System: 2-speed (2400 & 3000 SPM - Strokes Per Minute)
• Blade Material: Stainless Steel
• Included Blade: Competition Series #10 (1.8 mm)
• Product Dimensions (L x W x H): 18.5 x 4.6 x 4.8 cm
• Item Weight: 913 g
• Special Features: Removable Air Filter
• Target Audience: Dogs, Cats, Small Animals
• Batteries Required: No

8. Warranty and Support

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Wahl website. Keep your purchase receipt as proof of purchase.

For additional information or to purchase replacement parts and accessories, please visit the Wahl Store.