1. Introduction
Thank you for choosing the K&F CONCEPT 49mm Variable Neutral Density Lens Filter (ND8-ND2000). This filter is designed to provide precise light control for your camera lens, allowing for creative photographic and videographic effects in various lighting conditions. With its adjustable 3 to 11 stop light reduction, multi-layer coatings, and durable construction, this filter is an essential tool for photographers and videographers seeking enhanced control over exposure and motion blur.
2. Key Features
- Variable Light Reduction: Adjusts from ND8 to ND2000, offering 3 to 11 stops of light reduction. This enables the use of slower shutter speeds for motion blur effects or wider apertures in bright conditions.
- Premium Optical Glass: Crafted from high-quality AGC optical glass with 24 multi-layer coatings for superior image quality, reduced reflections, and minimized glare.
- Waterproof & Oil-Proof: Equipped with multi-layer hydrophobic and oil-proof coatings on both sides, ensuring easy cleaning and protection against water, dust, and oil.
- Ultra-Slim Frame: The filter features a 7.4mm CNC-machined aluminum frame, designed to prevent vignetting even with wide-angle lenses (e.g., 16mm focal length). The non-slip design facilitates quick installation and removal.
- Compatibility: Designed for 49mm camera lenses. Please verify your lens thread size before purchase.
3. Setup & Installation
To ensure proper function and avoid damage, follow these steps for installing your K&F CONCEPT Variable ND Filter:
- Identify Lens Thread Size: Locate the “∅” (diameter) symbol on your camera lens. This number indicates your lens's filter thread size. Ensure it matches the 49mm size of your filter.
- Clean Lens and Filter: Before attachment, gently clean both your camera lens and the ND filter using a microfiber cloth to remove any dust or smudges.
- Attach Filter: Carefully align the filter's threads with the threads on the front of your camera lens. Rotate clockwise until it is securely fastened. Do not overtighten.
- Lens Cap Compatibility: A 52mm lens cap is required for this 49mm variable ND filter due to its design. Standard 49mm lens caps may not fit.


4. Operating Instructions
The K&F CONCEPT Variable ND Filter allows for easy adjustment of light reduction. Follow these steps to operate your filter:
- Adjusting Density: Once attached to your lens, gently rotate the outer ring of the filter. You will notice markings (MIN to MAX, or ND8 to ND2000) indicating the range of neutral density.
- Observe Live View: While rotating, observe your camera's live view or viewfinder to see the real-time effect of the light reduction. Adjust until you achieve your desired exposure and creative effect.
- Avoid 'X' Pattern: Variable ND filters are made of two polarizing layers. When rotated to their maximum density, some wide-angle lenses may exhibit a visible 'X' pattern or uneven darkening. If this occurs, slightly reduce the density setting until the pattern disappears.



5. Maintenance & Care
Proper maintenance ensures the longevity and optimal performance of your ND filter:
- Cleaning: Use a soft, clean microfiber cloth specifically designed for optical lenses. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the filter).
- Storage: Always store the filter in its protective case when not in use to prevent scratches and dust accumulation. Avoid storing in extreme temperatures or high humidity.
- Handling: Handle the filter by its edges to avoid touching the glass surface, which can leave fingerprints and oils.


6. Troubleshooting
- 'X' Pattern / Uneven Darkening: This is a common phenomenon with variable ND filters, especially at maximum density settings or with very wide-angle lenses. To resolve, slightly decrease the density by rotating the outer ring until the 'X' pattern disappears.
- Vignetting: If dark corners appear in your images, especially with wide-angle lenses, ensure the filter is fully seated and not obstructed. The ultra-slim frame is designed to minimize this, but extreme wide-angle lenses may still show slight vignetting.
- Color Shift: While K&F CONCEPT filters are designed for neutral color rendition, slight color shifts can occur with any ND filter, particularly at higher densities. This can often be corrected during post-processing.
- Filter Stuck on Lens: If the filter is difficult to remove, try using a rubber filter wrench for better grip. Avoid excessive force.
7. Specifications
| Brand | K&F CONCEPT |
| Model Number | KF01.1266 |
| Filter Type | Variable Neutral Density (ND) |
| Density Range | ND8-ND2000 (3-11 Stops) |
| Filter Size | 49 Millimeters |
| Material | AGC Optical Glass |
| Coatings | 24 Multi-Layer Coatings (Hydrophobic, Oil-Proof) |
| Frame Thickness | 7.4mm |
| Water Resistance | Waterproof |
| Product Dimensions | 1.93 x 1.93 x 0.04 inches |
| Item Weight | 2.11 ounces |
8. Warranty & Support
K&F CONCEPT products are backed by a manufacturer's warranty. For specific warranty details, product support, or technical assistance, please refer to the official K&F CONCEPT website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.