Winegard Air 360+ Amplified Omnidirectional VHF/UHF and FM RV Antenna

Introduction

The Winegard Air 360+ is an amplified omnidirectional antenna designed for recreational vehicles (RVs), providing reception for VHF, UHF, and FM frequencies. This antenna offers 360-degree signal reception without the need for manual aiming or pointing, ensuring continuous access to over-the-air television and radio signals while parked. Its low-profile dome design is built for durability in various weather conditions.

This manual provides essential information for the proper installation, operation, and maintenance of your Winegard Air 360+ antenna.

Safety Information

• Always exercise caution when working on the roof of your RV. Ensure the vehicle is stable and use appropriate safety gear.
• Disconnect all power to the RV's electrical system before beginning installation to prevent electrical shock.
• Ensure all connections are secure and weatherproof to prevent water intrusion and signal degradation.
• Refer to your RV manufacturer's guidelines for roof access and sealing procedures.

Package Contents

Verify that all components are present before beginning installation:

• AIR 360+ Omnidirectional VHF/UHF/FM Antenna
• 12V Power Supply
• 12V Rocker Switch
• 20' Coax Cable
• Cable Access Cap
• Installation Hardware
• Printed Documentation

Setup and Installation

The Winegard Air 360+ antenna is designed for straightforward installation on the roof of your RV. It typically replaces existing antennas or can be installed as a new unit.

1. Preparation: Choose a suitable location on your RV roof, ensuring it is clear of obstructions and provides adequate space for mounting. If replacing an old antenna, remove it and clean the area thoroughly.
2. Mounting the Antenna: Secure the Air 360+ antenna to the RV roof using the provided installation hardware. Ensure a watertight seal around the base of the antenna using appropriate sealants like butyl tape and self-leveling Dicor sealant (not included).
3. Wiring: Route the 20' coax cable from the antenna through the cable access cap into the RV interior. Connect the coax cable to the 12V power supply and then to the 12V rocker switch. Finally, connect the output of the switch to your TV's antenna input. Ensure the 12V power supply is connected to a suitable 12V DC power source in your RV.
4. Final Seal: After securing the antenna and routing cables, apply a bead of sealant around the entire base of the antenna and any cable entry points to prevent water leaks.

For a visual guide on installation, refer to the official product video below:

Operating Instructions

The Winegard Air 360+ is designed for ease of use, requiring no manual aiming.

1. Power On: Ensure the 12V rocker switch connected to the antenna's power supply is in the "ON" position. A small indicator light on the switch or antenna may confirm power.
2. Channel Scan: On your television, navigate to the "Menu" or "Settings" option. Select "Channel Setup" or "Auto Program" and choose "Antenna" or "Air" as the signal source. Initiate a channel scan. The TV will automatically search for and store available over-the-air channels.
3. Viewing: Once the scan is complete, you can browse the received channels. The omnidirectional design means the antenna is always ready to receive signals from all directions without adjustment.
4. Optional Internet Upgrade: The Air 360+ is "Internet ready." To add 4G LTE and Wi-Fi capabilities, you can integrate the Winegard Gateway (sold separately). Refer to the Winegard Gateway manual for installation and operation instructions.

Maintenance

To ensure optimal performance and longevity of your Winegard Air 360+ antenna, follow these maintenance guidelines:

• Regular Inspection: Periodically inspect the antenna dome and its mounting for any signs of damage, cracks, or loose connections.
• Sealant Check: Annually, or more frequently if exposed to harsh weather, inspect the sealant around the antenna base and cable entry points. Reapply sealant as needed to maintain a watertight seal.
• Cleaning: Clean the antenna dome with a mild soap and water solution and a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the dome material.
• Cable Integrity: Check the coax cable for any fraying, cuts, or kinks. Ensure all cable connections are tight and free from corrosion.

Troubleshooting

If you experience issues with your Winegard Air 360+ antenna, consider the following troubleshooting steps:

• No Signal or Poor Reception:
  • Ensure the 12V rocker switch is "ON" and the power supply is functioning.
  • Perform a new channel scan on your TV. Signal availability can change based on location.
  • Check all coax cable connections from the antenna to the TV for tightness and proper seating.
  • Verify that your TV's input source is set to "Antenna" or "Air."
  • Move your RV to a different location if possible, as obstructions (trees, buildings) can block signals.
• Intermittent Signal:
  • Inspect the coax cable for damage or loose connections.
  • Check for any external interference from other electronic devices.
• No Power to Antenna:
  • Confirm the 12V power supply is receiving power from the RV's electrical system.
  • Check the fuse for the 12V power circuit.

Specifications

Warranty and Support

The Winegard Air 360+ antenna is backed by Winegard's manufacturer warranty. For specific warranty details, registration, or technical support, please visit the official Winegard website or contact their customer service department.

Official Winegard Website: www.winegard.com