EJEAS V6 Pro Motorcycle Helmet Bluetooth Headset Instruction Manual

1. Introduction

The EJEAS V6 Pro is a Bluetooth communication system designed for motorcycle helmets, enabling two-way intercom communication, mobile phone connectivity, music playback, and GPS navigation audio. This manual provides detailed instructions for installation, operation, and maintenance of your device.

Image: Two EJEAS V6 Pro units, showing the main module, microphone, and speakers.

2. Package Contents

Verify that all items are present in your package:

• EJEAS V6 Pro Bluetooth Intercom Unit(s)
• Headphone Velcro pads
• Charging Cable(s)
• Mounting Clip(s)
• Screws and Allen wrench
• Earphone/Microphone Set(s)
• User Manual

Image: A complete set of EJEAS V6 Pro package contents, including two main units, headphones, microphones, charging cables, and mounting accessories.

3. Product Features

• Bluetooth Connectivity: Bluetooth 4.0 for stable connection with mobile devices.
• Intercom System: Supports 2-way full-duplex communication for up to 6 riders, with any 2 riders able to talk simultaneously. Maximum intercom range of 1200 meters in open line of sight.
• Long Battery Life: 850mAh rechargeable battery provides up to 12 hours of intercom talk time, 18 hours of music listening, and 360 hours of standby time.
• Noise Cancellation: Advanced DSP noise cancelling technology reduces wind, engine, and ambient noise for clear audio.
• Water Resistance: IP65 rated for water and dust resistance, suitable for light rain conditions. Note: Not designed for immersion in water.
• Phone Functions: Automatic answering of phone calls (after 5 seconds), manual hang-up/rejection, last number redial.
• Media Functions: Listen to GPS navigation, music playback, volume control, track switching.

Image: Visual representation of key product features such as Bluetooth connectivity, intercom range, and battery life.

4. Controls and Indicators

The EJEAS V6 Pro unit features several buttons and an indicator light for various functions:

• Intercom (Power/A) Button: Used for power on/off, initiating intercom, and speaking to the 1st sub-unit.
• Phone Button: Used for answering/ending calls, playing/pausing music, and redialing.
• Volume + Button: Increases volume, long-press for previous track.
• Volume - Button: Decreases volume, long-press for next track.
• Button B: Used for speaking to the 2nd sub-unit.
• Button C: Used for speaking to the 3rd sub-unit.
• Button D: Used for speaking to the 4th sub-unit.
• Button E: Used for speaking to the 5th sub-unit.
• Indicator Light: Displays device status (e.g., blue for power on, red/blue flashing for pairing mode).

Image: Detailed view of the EJEAS V6 Pro unit highlighting the function of each button and the indicator light.

5. Setup and Installation

5.1 Attaching the Earphone/Microphone Set

1. Connect the earphone/microphone jack into the corresponding port on the V6 Pro unit.
2. Attach the speaker pads to the inside of your helmet using the provided Velcro. Ensure speakers are positioned directly over your ears for optimal audio.
3. Secure the microphone in front of your mouth, ensuring it is close but not touching.

5.2 Mounting the V6 Pro Unit to Your Helmet

The V6 Pro unit can be mounted using either the plastic clip or the metal clip for enhanced durability.

1. Choose a suitable location on the side of your helmet.
2. Attach the chosen mounting clip to the helmet. The metal clip offers a more secure and durable attachment.
3. Slide the V6 Pro unit onto the mounted clip until it clicks securely into place.

Image: An EJEAS V6 Pro unit securely mounted on the side of a motorcycle helmet.

6. Operating Instructions

6.1 Power On/Off

• Power On: Short-press the Intercom (Power/A) button. The indicator light will flash blue.
• Power Off: Long-press the Intercom (Power/A) button until the indicator light turns off.

6.2 Bluetooth Pairing with Mobile Phone

1. Ensure the V6 Pro is powered off.
2. Long-press the Phone button until the indicator light flashes red and blue alternately. This indicates pairing mode.
3. On your mobile phone, enable Bluetooth and search for available devices.
4. Select "V6" or "EJEAS V6 Pro" from the list to connect. The indicator light on the V6 Pro will flash blue when successfully paired.

6.3 Music Playback

• Play/Pause: Short-press the Phone button.
• Volume Up: Short-press the Volume + button.
• Volume Down: Short-press the Volume - button.
• Next Track: Long-press the Volume - button.
• Previous Track: Long-press the Volume + button.

6.4 Phone Call Management

• Answer Call: The V6 Pro will automatically answer incoming calls after 5 seconds.
• Hang Up Call: Short-press the Phone button.
• Reject Call: Long-press the Phone button for 3 seconds.
• Redial Last Number: Long-press the Phone button for 3 seconds when not on a call.

6.5 Intercom Pairing (Multiple Units)

The V6 Pro supports pairing with up to 5 other units (total 6 riders). One unit acts as the 'master' and can communicate with any of the 'sub-units'.

1. Ensure all V6 Pro units are powered off.
2. On all units, long-press the Intercom (Power/A) button until the indicator lights flash red and blue alternately.
3. Choose one unit to be the 'master'. On the master unit, short-press the Intercom (Power/A) button to start searching for other units.
4. Wait for 5-10 seconds. When the master and a sub-unit are flashing blue at the same rate, pairing is successful.
5. To pair additional units, repeat steps 2-4, using the master unit to initiate pairing with each new sub-unit by pressing the corresponding button (B, C, D, E) on the master unit.

6.6 Intercom Communication

• After successful pairing, short-press the Intercom (Power/A) button on the master unit to enter intercom mode.
• To switch communication to a specific sub-unit, short-press the corresponding button (A, B, C, D, E) on the master unit.
• Only two machines can speak at the same time. All communication switching must be done by the master unit.

6.7 Reconnecting Intercom Units

To reconnect previously paired units:

1. Power on all V6 Pro units by short-pressing the Intercom (Power/A) button.
2. On the master unit, short-press the Intercom (Power/A) button to re-establish the intercom connection.
3. For multiple units, short-press the corresponding button (A, B, C, D, E) on the master unit to reconnect each sub-unit.

6.8 Reset (Clear Pairing Records)

To clear all pairing records from a V6 Pro unit:

1. Ensure the V6 Pro unit is powered on.
2. Press the Phone button and Button B simultaneously.
3. The indicator light will flash red twice and then blue once, confirming that pairing records have been removed.

7. Maintenance

• Cleaning: Wipe the unit with a soft, damp cloth. Do not use harsh chemicals or solvents.
• Charging: Charge the device fully before first use and after prolonged storage. Use the provided charging cable. Charging time is approximately 3.5 hours.
• Storage: Store the device in a cool, dry place when not in use.
• Water Resistance: While water-resistant (IP65), avoid immersing the unit in water or prolonged exposure to heavy rain.

8. Troubleshooting

• No Power: Ensure the battery is charged. Connect to a power source and try again.
• Cannot Pair with Phone: Ensure the V6 Pro is in pairing mode (red and blue flashing light). Clear previous pairing records on both the V6 Pro and your phone, then try pairing again.
• Intercom Not Connecting: Ensure all units are powered on and in pairing mode (red and blue flashing) before initiating master pairing. If issues persist, clear pairing records on all units and re-pair.
• Poor Audio Quality: Check microphone and speaker placement inside the helmet. Ensure the microphone is close to your mouth and speakers are aligned with your ears. Verify volume settings on both the V6 Pro and your connected device.
• Intermittent Connection: Ensure units are within the specified range and there are no significant obstacles. Avoid strong electromagnetic interference.

9. Specifications

10. Warranty and Support

For any issues or questions regarding your EJEAS Motorcycle Bluetooth Headset, please contact customer support. The manufacturer offers support and will reply within 12 hours.

Please refer to your purchase documentation for specific warranty details.