Introduction
This manual provides comprehensive instructions for the Beyution CV98LM Replacement Remote Control. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance with your compatible Amazon TV Stick or TV Box.
Important Note: This remote control does not feature voice control functionality.

Figure 1: Front view of the Beyution CV98LM Replacement Remote Control.
Compatibility
The Beyution CV98LM Replacement Remote Control is compatible with the following Amazon TV Stick and TV Box models:
- For 1st Generation Amazon TV / Amazon TV Box: W87CUN, CL1130
- For 2nd Generation Amazon TV / Amazon TV Box: LY73PR, DV83YW, PE59CV
Setup
1. Battery Installation
The remote control requires two (2) AAA batteries (not included).
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.

Figure 2: Battery compartment showing correct AAA battery placement.
2. Pairing the Remote Control
To pair the Beyution CV98LM remote control with your Amazon TV Stick or TV Box, follow these general steps:
- Ensure your Amazon TV Stick or TV Box is powered on and connected to your TV.
- Place the new remote control within 10 feet (3 meters) of your Amazon device.
- Press and hold the Home button on the new remote control for approximately 10-20 seconds.
- Release the button when you see a message on your TV screen indicating that the remote is pairing or has been paired successfully.
- If pairing is unsuccessful, remove and reinsert the batteries, then repeat step 3. You may also need to navigate to your Amazon device's settings (using an existing remote or the Fire TV app on your phone) to the 'Remotes & Bluetooth Devices' section and select 'Amazon Fire TV Remotes' to add a new remote.
Operating the Remote Control
The Beyution CV98LM remote control provides essential functions for navigating your Amazon TV Stick or TV Box. Familiarize yourself with the button layout and their functions:

Figure 3: Button layout and functions of the remote control.
| Button | Function |
|---|---|
| Navigation Ring | Move cursor or selection Up, Down, Left, or Right. |
| Select Button (Center of Navigation Ring) | Confirm selection or open an item. |
| Back Button (Curved Arrow) | Go back to the previous screen or menu. |
| Home Button (House Icon) | Return to the main home screen. |
| Menu Button (Three Horizontal Lines) | Access contextual menu options. |
| Rewind Button (Double Left Arrow) | Rewind media playback. |
| Play/Pause Button (Play/Pause Icon) | Play or pause media playback. |
| Fast Forward Button (Double Right Arrow) | Fast forward media playback. |
Maintenance
Cleaning
To clean your remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries or different types of batteries.
Troubleshooting
If you encounter issues with your Beyution CV98LM remote control, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead or incorrectly inserted batteries. | Check battery polarity. Replace both AAA batteries with new ones. |
| Remote not responding after battery replacement | Remote lost pairing with the device. | Re-pair the remote control with your Amazon TV Stick/Box (refer to 'Pairing the Remote Control' section). |
| Delayed response or multiple button presses required | Low batteries, interference, or temporary communication issue. | Replace batteries. Ensure no obstructions between the remote and the Amazon device. Try re-pairing the remote. |
| Remote works intermittently or stops working over time | Batteries are depleting, or internal component wear. | Replace batteries. If the issue persists, contact customer support. |
| Remote does not control voice functions | This model does not support voice control. | This is expected behavior. The CV98LM remote is designed without voice functionality. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Beyution |
| Model Number | CV98LM (Item model: BE-LITTLE-amz-CV98LM) |
| Product Dimensions | 7 x 2 x 0.65 inches (17.8 x 5.1 x 1.65 cm) |
| Item Weight | 1.5 ounces (42.5 grams) |
| Batteries Required | 2 x AAA (Alkaline recommended) |
| Color | Black |
| Special Feature | Ergonomic design |
| Max Number of Supported Devices | 2 (referring to the remote's internal capability, though it's typically paired to one device at a time) |
| Voice Functionality | Not supported |
Support
For any questions, concerns, or issues regarding your Beyution CV98LM Replacement Remote Control, please contact the seller directly. Providing details about your issue will help facilitate a quicker resolution.