1. Introduction
This user manual provides essential information for the Beyution NH000UD NH001UD replacement infrared remote control. This remote is designed to function as a direct replacement for original Emerson and Sylvania LCD LED TV remote controls, offering immediate usability without complex programming.
2. Product Overview
The Beyution NH000UD NH001UD remote control is a standard infrared device, replicating the functionality of the original remotes for compatible Emerson and Sylvania television models. It features a familiar button layout for easy navigation and control of your television's functions.
Figure 1: Front view of the NH000UD NH001UD Replacement Remote Control.
3. Setup and Installation
The NH000UD NH001UD remote control requires no programming. Simply install the batteries, and it will be ready for use with compatible televisions.
3.1 Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide or press the cover to open the compartment.
- Insert two (2) new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
Important: Always use new alkaline batteries for optimal performance. Rechargeable batteries may not provide sufficient power for consistent operation. Ensure no objects are blocking the infrared sensor on your television or the remote control's emitter.
4. Operation
Once batteries are installed, point the remote control directly at your television's infrared receiver. The remote functions identically to the original remote control for compatible models. Press the desired button to control your television's power, volume, channels, menu, and other features.
- Power Button: Turns the TV on or off.
- Volume Up/Down: Adjusts the audio level.
- Channel Up/Down: Changes the television channel.
- Number Buttons (0-9): Directly select channels.
- Menu/OK/Navigation: Access and navigate the TV's on-screen menu.
- Source: Selects input sources (HDMI, AV, etc.).
5. Compatible TV Models
This replacement remote control is compatible with a wide range of Emerson and Sylvania LCD LED TV models. Please verify your TV model number against the list below:
Figure 2: Comparison of the replacement remote with original models.
- LC220SL1, LC190SL1, LC320SL1, LC320SLX, LC195SLX
- LC190EM1, LC190EM2, LC195EMX, LC220EM1, LC220EM2
- LC260EM1, LC260EM2, LC320EM1, LC320EMX, LC401EM2
- LC407EM1, LC320EM2, LC370EM2, LC320EM1F, LC320EM2F
- LC320EMXF, LC401EM2F, LC401EM3F, LC260EM2A
- CLC320EM2F, CLC401EM2F
If your specific TV model is not listed, please contact the seller for assistance in confirming compatibility.
6. Troubleshooting
- Remote Not Responding:
- Ensure new alkaline batteries are correctly installed. Replace old batteries with fresh ones.
- Check that there are no obstructions between the remote control and the TV's infrared receiver.
- Confirm that the remote is pointed directly at the TV.
- Remote Turns TV Off but Not On:
- This can sometimes occur with universal or replacement remotes due to slight variations in infrared codes. Ensure the TV is fully powered off, not just in standby.
- Try pressing the power button firmly and holding it for a second or two.
- Specific Functions Not Working:
- Verify your TV model is listed in the compatible models section.
- Some advanced or unique functions of original remotes may not be fully replicated by replacement units.
7. Specifications
- Model: NH000UD NH001UD
- Type: Infrared (IR) Replacement Remote Control
- Power Source: 2 x AAA Batteries (not included)
- Dimensions: Approximately 6 x 2 x 0.7 inches (15.24 x 5.08 x 1.78 cm)
- Weight: Approximately 2 ounces (56.7 grams)
- Color: Black
- Compatible Devices: Emerson and Sylvania LCD LED Televisions
8. Maintenance
To ensure the longevity and proper functioning of your remote control:
- Keep the remote clean by wiping it with a soft, dry cloth.
- Avoid exposing the remote to extreme temperatures, direct sunlight, or moisture.
- Do not drop the remote or subject it to strong impacts.
- Remove batteries if the remote will not be used for an extended period to prevent leakage.
9. Support
For further assistance, compatibility inquiries, or troubleshooting not covered in this manual, please contact the seller or manufacturer directly. Provide your TV model number and the remote control model (NH000UD NH001UD) for efficient support.