AGPTEK KVM HDMI USB Extender Instruction Manual

1. Introduction

The AGPTEK KVM HDMI USB Extender (Model PC000226) allows for the extension of HDMI video and USB keyboard/mouse signals over a single Ethernet cable (CAT5/5e/6/7) up to 120 meters (365 feet). This device is designed for managing servers from a remote workstation, supporting resolutions up to 1080p at 60Hz. It ensures signal stability and reliability over long distances and can be configured for point-to-point or one-to-many receiver setups.

2. Package Contents

Please verify that all items are present in your package:

• 1x KVM HDMI USB Extender Sender Unit (TX)
• 1x KVM HDMI USB Extender Receiver Unit (RX)
• 2x DC 5V Power Adapters
• 1x USB-A to USB-A Cable
• 1x User Manual (this document)

3. Product Features

• KVM Functionality: Enables control of a computer system using a single keyboard and mouse from a remote location.
• Extended Transmission: Transmits HDMI and USB signals up to 120 meters (365 feet) over a single CAT5/5e/6/7 Ethernet cable.
• High Definition Video: Supports video resolutions up to 1080p @ 60Hz.
• USB 1.1 Compatibility: Works with wired USB 1.1 mice and keyboards, or Bluetooth devices with a USB dongle. Also supports DVR camera mouse and keyboard functions. Note: Does not support 2.4G wireless mouse/keyboard kits.
• One-to-Many Configuration: A single sender unit can connect to multiple receiver units via an Ethernet switch for multi-display setups.
• EDID Copy Function: Automatically matches display device types for optimal compatibility.
• Ethernet Standard: Complies with 802.3 Ethernet 10/100/1000 Mbps standards.
• Built-in ESD Protection: Enhances transmission safety and device longevity.

Figure 3.1: Key features of the AGPTEK KVM HDMI USB Extender, highlighting TCP/IP agreement, USB peripheral support, 120-meter extension capability, compact design, and 1080P HD video support.

4. Product Overview and Interfaces

Familiarize yourself with the sender (TX) and receiver (RX) units and their respective ports.

Figure 4.1: Interface diagram for the Sender (TX) and Receiver (RX) units. The TX unit features DC 5V power input, HDMI input, and USB input. The RX unit includes DC 5V power input, HDMI output, and USB ports for mouse/keyboard. Both units have LAN TX/RX ports and a reset button.

Sender Unit (TX)

• DC 5V: Power input port.
• HDMI IN: Connects to the HDMI output of your source device (e.g., computer, DVR).
• USB IN (PC): Connects to the USB port of your source device using the provided USB-A to USB-A cable. This transmits keyboard and mouse data.
• LAN TX: Connects to the Ethernet cable (CAT5/5e/6/7) for signal transmission to the receiver.
• RESET: Button to reset the unit.
• Signal Light: Indicates signal status.

Receiver Unit (RX)

• DC 5V: Power input port.
• HDMI OUT: Connects to the HDMI input of your display device (e.g., monitor, TV).
• USB (Mouse/Keyboard): Connects to your USB mouse and keyboard.
• LAN RX: Connects to the Ethernet cable (CAT5/5e/6/7) receiving signal from the sender.
• RESET: Button to reset the unit.
• Signal Light: Indicates signal status.

5. Setup Instructions

Follow these steps to set up your KVM HDMI USB Extender.

5.1. Point-to-Point Connection

1. Connect Source to Sender (TX):
   • Connect an HDMI cable from your source device's HDMI output to the HDMI IN port on the Sender (TX) unit.
   • Connect the provided USB-A to USB-A cable from your source device's USB port to the USB IN (PC) port on the Sender (TX) unit.
2. Connect Display and Peripherals to Receiver (RX):
   • Connect an HDMI cable from the HDMI OUT port on the Receiver (RX) unit to your display device's HDMI input.
   • Connect your USB keyboard and mouse to the USB ports on the Receiver (RX) unit.
3. Connect Sender (TX) and Receiver (RX) with Ethernet Cable:
   • Connect a single CAT5/5e/6/7 Ethernet cable from the LAN TX port on the Sender (TX) unit to the LAN RX port on the Receiver (RX) unit. Ensure the cable length does not exceed 120 meters.
4. Power On:
   • Connect the two DC 5V power adapters to the DC 5V ports on both the Sender (TX) and Receiver (RX) units, then plug them into power outlets.
5. Verify the signal lights on both units are active, indicating a successful connection.

Figure 5.1: Basic point-to-point connection setup, demonstrating signal extension up to 120 meters from a computer to a remote display and KVM peripherals.

5.2. One-to-Many Receiver Connection (via Ethernet Switch)

For connecting one source to multiple displays and KVM workstations, an Ethernet switch is required.

1. Connect Source to Sender (TX): Follow steps 5.1.1 for connecting your source device to the Sender (TX) unit.
2. Connect Sender (TX) to Ethernet Switch: Connect the LAN TX port of the Sender (TX) unit to an available port on your Ethernet router or switch using an Ethernet cable.
3. Connect Receiver(s) (RX) to Ethernet Switch: For each display and KVM workstation, connect the LAN RX port of a Receiver (RX) unit to an available port on the same Ethernet router or switch using an Ethernet cable.
4. Connect Display and Peripherals to each Receiver (RX): For each Receiver (RX) unit, follow steps 5.1.2 to connect your display device, USB keyboard, and mouse.
5. Power On: Connect the DC 5V power adapters to all Sender (TX) and Receiver (RX) units, then plug them into power outlets.
6. Verify all signal lights are active.

Figure 5.2: One-to-many connection setup, where a single source (computer) is extended to multiple monitors via a router or Ethernet switch and multiple receiver units.

Important Cable Information: Use high-quality CAT5/5e/6/7 STP or UTP Ethernet cables for optimal performance. For best video quality, especially over longer distances, CAT6 or higher cables are recommended. Obsolete CAT5 and CAT5e cables may impact video quality.

6. Operating Instructions

Once the setup is complete and all units are powered on, the KVM extender will automatically establish the connection. The remote display should show the video output from the source device, and the connected USB keyboard and mouse will control the source device.

Figure 6.1: Illustration of USB mouse and keyboard connectivity to the receiver unit, enabling remote control of the source device.

The system operates transparently, meaning your remote keyboard and mouse function as if they were directly connected to the source computer. No additional software or drivers are typically required for basic KVM functionality.

7. Maintenance

To ensure the longevity and optimal performance of your AGPTEK KVM Extender, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or aerosol sprays.
• Ventilation: Ensure the units are placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• Cable Management: Keep cables neatly organized and avoid sharp bends or excessive tension, which can damage the cables or ports.
• Power Supply: Use only the provided DC 5V power adapters. Using unauthorized power adapters may damage the device and void the warranty.
• Environment: Avoid exposing the units to extreme temperatures, humidity, or direct sunlight.

8. Troubleshooting

If you encounter issues with your KVM Extender, refer to the following common problems and solutions:

9. Specifications

10. Safety Information

Please read and follow these safety precautions to prevent damage to the device or injury to yourself:

• Do not disassemble or modify the device. This may result in electric shock or fire.
• Keep the device away from water, moisture, and extreme temperatures.
• Use only the provided power adapters.
• Avoid dropping or subjecting the device to strong impacts.
• Ensure proper grounding for all connected equipment.

11. Warranty and Support

AGPTEK products are designed for reliability and performance. For warranty information and technical support, please refer to the official AGPTEK website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, please visit: www.agptek.com