Lenovo Audio HT10 Pro True Wireless Earbuds User Manual

Introduction

This manual provides comprehensive instructions for the proper use, setup, operation, and maintenance of your Lenovo Audio HT10 Pro True Wireless Earbuds. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

The Lenovo HT10 Pro earbuds feature Bluetooth 5.0 connectivity, IPX5 sweat and water resistance, and up to 48 hours of playtime with the charging case. They are designed for high-definition audio with Qualcomm aptX technology and include a microphone for hands-free calling.

1. Setup

1.1 Unboxing and Package Contents

Upon opening the package, verify that all components are present:

• 2 x Lenovo HT10 Pro TWS Bluetooth Earbuds
• 1 x Magnetic Charging Case
• 3 x Pairs of Silicone Ear Tips (various sizes)
• 1 x USB-A to Micro USB Charging Cable
• 1 x User Manual (this document)
• 1 x Carry Pouch

1.2 Initial Charging

Before first use, fully charge the earbuds and the charging case. The charging case has an 800mAh battery capacity.

1. Place both earbuds into the charging case. Ensure they are correctly seated in their respective slots (L for left, R for right).
2. Connect the Micro USB charging cable to the charging port on the case and the USB-A end to a compatible USB power source (e.g., computer, wall adapter).
3. The LED indicators on the charging case will illuminate to show charging status. A full charge typically takes approximately 2 hours.
4. Once fully charged, disconnect the charging cable. The earbuds will charge automatically when placed in the case, drawing power from the case's internal battery.

Image: Lenovo HT10 Pro True Wireless Earbuds in their open charging case. The image displays the two earbuds nestled in their charging slots, with the charging contacts visible at the bottom of each slot. The charging case itself is black, with three white LED indicator lights visible on the front, indicating battery status. The earbuds are also black with metallic accents on their outer surface.

1.3 Pairing with a Device

The earbuds utilize Bluetooth 5.0 for a fast and stable connection up to 10 meters.

1. Power On: Open the charging case, or remove the earbuds from the case. They will automatically power on and enter pairing mode. You may hear an audible prompt.
2. Activate Bluetooth: On your smartphone, tablet, or other Bluetooth-enabled device, navigate to the Bluetooth settings and ensure Bluetooth is turned on.
3. Select Device: In the list of available Bluetooth devices, locate and select "Lenovo HT10 Pro".
4. Confirm Connection: Once connected, you will hear a confirmation tone or voice prompt from the earbuds. The earbuds are now ready for use.
5. Automatic Reconnection: After initial pairing, the earbuds will automatically connect to the last paired device when removed from the charging case, provided Bluetooth is active on the device and it is within range.

2. Operating Instructions

2.1 Power On/Off

• Power On: Open the charging case or remove the earbuds from the case. They will power on automatically.
• Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.

2.2 Music Playback and Call Management

The earbuds feature touch controls for various functions. Specific tap patterns may vary slightly; refer to the quick start guide for precise details if available.

Note: Volume control is typically managed directly from your connected device.

2.3 Earbud Battery Status

The battery status of the earbuds can be viewed on most Apple iOS14 and Android devices once connected.

3. Maintenance

3.1 Cleaning

• Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, solvents, or aerosol sprays.
• Gently remove any earwax or debris from the ear tips and speaker mesh using a small, clean brush or cotton swab.
• Ensure charging contacts on both the earbuds and the case are clean and free of obstruction for proper charging.

3.2 Water and Sweat Resistance (IPX5)

The Lenovo HT10 Pro earbuds are rated IPX5, meaning they are resistant to water jets from any direction. This makes them suitable for workouts and light rain.

• Do not submerge the earbuds in water.
• Do not expose the charging case to water, as it is not water-resistant.
• If the earbuds get wet, wipe them dry thoroughly before placing them back into the charging case to prevent damage to the charging contacts.

3.3 Storage

When not in use, store the earbuds in their charging case to protect them and keep them charged. Store the product in a cool, dry place away from extreme temperatures and direct sunlight.

4. Troubleshooting

4.1 Common Issues and Solutions

4.2 Resetting the Earbuds

If you experience persistent issues, a factory reset may resolve them. The exact reset procedure can vary; typically, it involves:

1. Forget "Lenovo HT10 Pro" from your device's Bluetooth settings.
2. Place both earbuds into the charging case.
3. While the earbuds are in the case, press and hold a specific button on the case or earbuds for a duration (e.g., 10-15 seconds) until the LED indicators flash in a specific pattern, indicating a reset. (Note: Refer to the quick start guide for the precise reset button location and duration for your specific model.)
4. Remove the earbuds and attempt to pair them again as described in Section 1.3.

5. Specifications

6. Warranty and Support

Lenovo products are manufactured to high quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your product packaging or visit the official Lenovo support website.

For technical assistance, troubleshooting beyond this manual, or to inquire about service, please contact Lenovo customer support through their official channels. Keep your proof of purchase for warranty claims.