1. Important Safety Information
Please read and understand all instructions before using this product. Failure to follow these warnings and instructions could result in injury or product damage.
- Keep out of reach of children.
- Do not use if the product appears damaged.
- Do not leave the airbed plugged in unattended.
- Keep away from heat sources and open flames.
- Ensure the internal pump switch is in the OFF/Stop position once the airbed is fully inflated to prevent air leakage.
- The airbed is designed for indoor use.
2. Package Contents
Verify that all components are present:
- Intex Comfort Plush High Rise Airbed (Model 64418NP)
- Integrated Electric Pump
- Storage/Carry Bag
- Instruction Manual
3. Product Overview & Features
The Intex Comfort Plush High Rise Airbed is designed for comfort and convenience, featuring durable Fiber-Tech construction and an integrated electric pump for quick inflation and deflation.
The Intex Dura-Beam Deluxe airbed, showcasing its elevated design.
- Integrated Electric Pump: For rapid inflation and deflation.
- Fiber-Tech Construction: Provides enhanced stability, durability, and comfort.
- Comfortable Height: 56 cm (22 inches) mattress height for ease of getting in and out.
- Soft Top Surface: Offers a comfortable sleeping experience.
- Carry Bag: Included for easy storage and transport.
Cutaway view demonstrating the internal Fiber-Tech construction for enhanced stability and durability.
4. Setup Instructions (Inflation)
Follow these steps to inflate your airbed:
- Unroll the airbed on a clean, level surface free of sharp objects.
- Locate the integrated electric pump on the side of the airbed.
- Plug the pump's power cord into a standard electrical outlet.
- Turn the pump switch to the 'Inflate' position. The airbed will begin to inflate.
- Inflation typically takes approximately 5 minutes. Inflate to your desired firmness.
- Once inflated, turn the pump switch to the 'OFF/Stop' position and unplug the power cord.
Note: New vinyl may stretch during initial use. It is normal for the airbed to feel softer after the first few uses. You may need to add air to maintain desired firmness during the first few days.
Close-up view of the integrated electric pump for inflation and deflation.
Diagram illustrating the airbed's dimensions (203x152x56 cm) and approximate inflation time of 4.45 minutes.
5. Operating Instructions (Deflation)
To deflate and store your airbed:
- Ensure the airbed is unplugged from the power outlet.
- Plug the pump's power cord back into a standard electrical outlet.
- Turn the pump switch to the 'Deflate' position. The pump will begin to extract air from the airbed.
- Allow the pump to run until most of the air has been removed and the airbed is flat.
- Once deflated, turn the pump switch to the 'OFF/Stop' position and unplug the power cord.
- Fold or roll the airbed neatly and place it into the included carry bag for storage.
A person carrying the Intex airbed in its included storage bag.
6. Care and Maintenance
- Cleaning: Spot clean the airbed with a mild detergent and damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the deflated airbed in its carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Puncture Prevention: Avoid placing the airbed on rough or uneven surfaces. Keep pets away from the airbed to prevent punctures.
- Repairs: In case of a small puncture, use a vinyl repair kit (not included) to patch the hole.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Airbed loses air / becomes soft |
|
|
| Pump not working |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 64418NP |
| Dimensions (L x W x H) | 203 cm x 152 cm x 56 cm (80 in x 60 in x 22 in) |
| Weight Capacity | 272 kg (600 lbs) |
| Number of Persons | 2 |
| Inflation Time | Approx. 5 minutes |
| Material | PVC, ABS, CU, RAYON, POLYESTER |
| Color | Grey |
| Integrated Pump | Yes |
| Firmness Description | Plush |
| Water Resistance Level | Water-repellent |
Intex Comfort Plush High Rise Airbed in a bedroom setting.
9. Warranty Information
This Intex Comfort Plush High Rise Electric Airbed comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, punctures, or normal wear and tear.
10. Support
For further assistance, troubleshooting, or to inquire about warranty service, please contact Intex customer support. Refer to the contact information provided on the product packaging or the official Intex website.
