Schneider Conext System Control Panel (SCP) 865-1050-01 User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Schneider Conext System Control Panel (SCP) model 865-1050-01. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or connected equipment.

2. Safety Information

Always observe the following safety precautions to reduce the risk of electric shock, fire, or injury:

Installation must be performed by qualified personnel.
Ensure all power sources are disconnected before installation or maintenance.
Do not operate the SCP if it has been damaged in any way.
Keep the unit away from water, moisture, and flammable materials.
Refer to the main system inverter/charger manual for comprehensive safety guidelines.

3. Product Overview

The Conext System Control Panel (SCP) provides a comprehensive display and control interface for Conext inverter/charger systems. It allows for monitoring system status, configuring settings, and managing power flow.

3.1. Components

LCD Display: Shows system status, parameters, and menu options.
Navigation Buttons: "Enter", "Up", "Down", and "Exit" for menu navigation and setting adjustments.
Event/Warning LED: Illuminates to indicate system events or warnings.
Standby LED: Indicates the system's standby status.

Figure 1: Front view of the Schneider Conext System Control Panel (SCP) 865-1050-01. The panel features an LCD screen displaying system information such as mode, battery voltage, and AC output. Below the screen are four control buttons: Enter, Up arrow, Down arrow, and Exit. To the left of the screen is an 'Event/Warning' indicator, and to the right is a 'Standby' indicator. The Schneider Electric logo is visible in the bottom right corner.

4. Setup and Installation

The SCP is designed for easy integration with Conext inverter/charger systems. Follow these steps for proper installation:

Mounting: Choose a suitable location for mounting the SCP, ensuring it is easily accessible and protected from direct sunlight or extreme temperatures. Use appropriate fasteners to secure the panel to a wall or surface.
Cabling: Connect the SCP to the Conext inverter/charger using the provided communication cable. Ensure the cable is securely connected to the designated ports on both the SCP and the inverter/charger.
Power On: Once all connections are secure, power on the Conext system. The SCP display should illuminate and begin showing system status.
Initial Configuration: Refer to the Conext inverter/charger manual for initial system configuration and network setup, if applicable. The SCP will reflect these settings.

Note: Always ensure the system is powered off before making any physical connections or disconnections.

5. Operating the System Control Panel

The SCP provides intuitive navigation for monitoring and controlling your Conext system.

5.1. Basic Navigation

Viewing Status: The main screen displays real-time system parameters such as battery voltage, AC output, and operating mode. Use the Up/Down arrows to scroll through different status screens.
Accessing Menus: Press the "Enter" button to access the main menu.
Navigating Menus: Use the Up/Down arrows to scroll through menu options. Press "Enter" to select an option.
Exiting Menus: Press the "Exit" button to go back to the previous screen or to the main status display.

5.2. Common Operations

Changing Settings: Navigate to the desired setting within the menu, press "Enter", use Up/Down to adjust the value, and press "Enter" again to confirm.
Viewing Event Logs: The SCP stores a log of system events and warnings. Access this from the main menu to review historical data.
System On/Off: Depending on your system configuration, the SCP may allow you to initiate system shutdown or startup. Refer to your inverter/charger manual for specific procedures.

6. Maintenance

The Conext SCP requires minimal maintenance to ensure long-term reliable operation.

Cleaning: Periodically wipe the display and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Inspections: Regularly check the communication cable for any signs of damage or loose connections.
Firmware Updates: If firmware updates are available for your Conext system, they are typically applied through the inverter/charger unit. Consult the inverter/charger manual or Schneider Electric support for update procedures.

7. Troubleshooting

If you encounter issues with your SCP, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
SCP display is blank.	No power to the system or loose communication cable.	Ensure the Conext system is powered on. Check communication cable connections at both the SCP and the inverter/charger.
Incorrect readings on display.	System not properly calibrated or communication error.	Verify system settings through the inverter/charger. Restart the system. If issues persist, contact support.
Buttons are unresponsive.	Temporary software glitch or physical damage.	Restart the Conext system. If buttons remain unresponsive, contact Schneider Electric support.

For more complex issues, consult the comprehensive troubleshooting section in your Conext inverter/charger manual or contact Schneider Electric technical support.

8. Specifications

Key technical specifications for the Schneider Conext System Control Panel (SCP) 865-1050-01:

Model: 865-1050-01
Compatibility: Conext XW+, SW, and other compatible Schneider Electric inverter/charger systems.
Display: Backlit LCD
Interface: Intuitive button navigation
Communication: Xanbus network
Manufacturer: Conext (as per product specifications)
ASIN: B07XVPK5BD
Date First Available: Dec 7 2023

9. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your Conext system or visit the official Schneider Electric website. Technical support is available through Schneider Electric's customer service channels. Please have your product model number (865-1050-01) and serial number ready when contacting support.

Schneider Electric Official Website: www.se.com

	Schneider Aktiv - Ausgabe 3/87: Tests, Tipps & Tricks für Schneider Computer Ein umfassender Überblick über die März 1987 Ausgabe von Schneider Aktiv, mit Tests zu Spielen wie Aliens!, Software wie Sybex Star-Texter und tiefgehenden Artikeln zu CP/M, dBase und dem Schneider PC.
	Schneider PC-Super-Angulon 28mm f/2.8 Lens User Manual \| Perspective Correction & Shift Photography Comprehensive user manual for the Schneider PC-Super-Angulon 28mm f/2.8 lens, detailing its features for perspective correction, parallel shift, large image circle, and technical specifications. Ideal for architectural and product photography.
	Schneider SCL141CTP Laptop User Guide User manual for the Schneider SCL141CTP laptop, detailing features, setup, and usage of the Intel Quad Core processor and Windows 10 operating system.
	Schneider Model Railway Signals: Type L Main and Distant Signals (H0 1:87) Detailed overview of Schneider Modellbahnzubehör's Type L main and distant signals for H0 scale (1:87) model railways, covering product types, dimensions, assembly, signal meanings, and safety instructions. Features models for SBB and Epoche III+.
	Schneider National Biometric Data Collection and Retention Policy Policy outlining Schneider National Carriers, Inc. and Schneider National Bulk Carriers, Inc.'s collection, storage, use, and disclosure of biometric data collected via Netradyne's Driver.i system.
	Schneider S51-DG Smart Door Lock User Manual Comprehensive guide to installing, setting up, and using the Schneider S51-DG Smart Door Lock. Learn about its features, security modes, and various functions for enhanced home security.

Schneider 865-1050-01