1. Product Overview
The Intex PureSpa Sahara 4-person hot tub is designed to provide maximum relaxation and well-being. It features 120 bubble jets and can heat water up to 40°C (104°F). Its robust FiberTech structure ensures durability, allowing users to even sit on the edge of the spa. The integrated electric inflator simplifies setup and deflation, making it convenient for both summer and winter use.
Image 1.1: The Intex PureSpa Sahara hot tub with active bubble jets.
2. Safety Information
WARNING: Always install the PureSpa on a flat, stable, and level surface. Ensure the chosen location can support the weight of the filled spa and its occupants. Follow all recommendations for filling, heating, and maintenance to ensure safe operation.
For installations on elevated structures such as terraces, balconies, rooftops, attics, or patios, it is CRITICAL to consult a qualified technician to verify the maximum load capacity supported by the building's construction. The usage load for this spa is calculated at 298 kg/m² with 4 users weighing 75 kg each.
Image 2.1: Important warning regarding structural load capacity for installation.
3. Features
- Relaxation: Equipped with 120 bubble jets for a soothing and therapeutic experience.
- Strength and Comfort: Features a FiberTech structure, providing exceptional solidity and comfort, allowing users to sit on the spa's edge.
- Simplicity: An all-in-one digital control panel manages heating, inflation/deflation, bubble jets, and filtration. An integrated electric inflator ensures easy setup.
- Design: Its simple and elegant design allows the Pure Spa Sahara to seamlessly integrate into any garden setting, suitable for both summer and winter use.
- Accessories: Includes a storage bag, chemical dispenser, thermal ground cloth, and two filter cartridges.
Image 3.1: Illustration of the FiberTech internal structure for enhanced durability.
Image 3.2: PureSpa's heated air bubbles provide a more comfortable experience than typical cold air bubbles.
4. Setup
- Site Selection: Choose a flat, stable, and clean area for installation, away from sharp objects or uneven surfaces. Ensure adequate drainage.
- Unpacking: Carefully remove all components from the packaging. Lay out the ground cloth in the chosen location.
- Inflation: Connect the integrated electric inflator to the spa's inflation valve. The spa will inflate quickly and automatically. Ensure it is firm but not over-inflated.
- Control Unit Connection: Connect the control unit to the spa following the instructions in the detailed manual.
- Filling: Fill the spa with water to the recommended level, typically indicated by a fill line inside the spa.
Image 4.1: The PureSpa Sahara ready for use in an outdoor setting.
5. Operating Instructions
The PureSpa Sahara features an intuitive digital control panel for easy operation of all functions.
- Power On/Off: Use the power button on the control panel to turn the spa system on or off.
- Heating: Set your desired water temperature using the temperature adjustment buttons. The heating system will automatically shut off when the water reaches 40°C (104°F).
- Bubble Jets: Activate the 120 bubble jets for a relaxing massage.
- Filtration: The filtration system runs automatically to keep the water clean. Ensure filter cartridges are regularly cleaned or replaced.
Image 5.1: The digital control panel for managing spa functions and the cover buckle for security.
6. Maintenance
Regular maintenance is crucial for the longevity and hygiene of your PureSpa.
- Water Treatment: Use appropriate spa chemicals (e.g., bromine, active oxygen, anti-algae, anti-calc) to maintain water quality. A chemical dispenser is included for this purpose.
- Filter Cartridges: Clean filter cartridges regularly (e.g., daily or every other day depending on usage) and replace them every few weeks to ensure efficient filtration. Two filter cartridges are included.
- Cover: Always use the lockable, resistant cover when the spa is not in use to limit heat loss and keep debris out.
- Cleaning: Periodically clean the interior and exterior surfaces of the spa with mild soap and water.
- Storage: When not in use for extended periods, deflate the spa and store it in the provided storage bag in a dry, protected area.
Image 6.1: Using the included chemical dispenser for water treatment.
Image 6.2: The spa can be easily stored in its transport/storage bag.
7. Troubleshooting
This section provides general guidance for common issues. For detailed troubleshooting, refer to the full product manual or contact customer support.
- Spa Not Heating: Check power connection, ensure the heating function is activated on the control panel, and verify water level. The heating system automatically stops at 40°C.
- Bubbles Not Working: Ensure the bubble jet function is activated. Check for any blockages in the air blower system.
- Water Quality Issues: If water is cloudy or discolored, check and adjust chemical levels (pH, sanitizer). Clean or replace filter cartridges.
- Air Leakage: Inspect the spa body for any punctures. Use the included repair kit for minor leaks. Ensure all valves are securely closed.
8. Specifications
| Specification | Detail |
|---|---|
| Brand | Intex |
| Model Number | 28426EX |
| Product Dimensions (L x W x H) | 56 x 79 x 51 cm; 44.1 kilograms |
| Item Weight | 44.1 Kilograms |
| Material | PVC, PET, STEEL, CU, PC |
| Color | Beige |
| Voltage | 220 Volts (AC) |
| Shape | Round |
| Capacity | 795 Liters |
| Number of Jets | 140 |
| Seating Capacity | 4 |
| Date First Available on Amazon.com.be | April 8, 2022 |
| Spare Parts Availability | Information unavailable on spare parts |
Image 8.1: Key specifications and dimensions of the PureSpa Sahara.
9. Warranty and Support
For specific warranty information and customer support, please refer to the documentation included with your product or visit the official Intex website. Keep your purchase receipt as proof of purchase for any warranty claims.
