Little Giant® Quail Waterer Base

Introduction

The Little Giant Quail Waterer Base is designed to provide a safe and accessible water source for small birds such as quail and baby poultry chicks. This durable plastic base features a narrow channel to prevent young birds from drowning and helps maintain water cleanliness. It is intended for use with a compatible 1-quart plastic screw-on poultry waterer jar, which is sold separately.

Setup

The waterer base is designed for easy assembly with a compatible water jar. Follow these steps to set up your waterer:

1. Ensure the waterer base and your chosen water jar are clean.
2. Fill the waterer jar with clean water.
3. Carefully screw the Little Giant Quail Waterer Base onto the filled waterer jar. Ensure a tight seal to prevent leaks.
4. Invert the assembled waterer and place it on a flat, stable surface within the bird's enclosure. Water will flow into the narrow channel of the base.

This base is compatible with the Little Giant 1-Quart Plastic Screw-On Poultry Waterer Jar (Item No. 690, sold separately) and can also be used with standard mason jars.

Operation

The Little Giant Quail Waterer Base operates on a gravity-feed system. As birds drink from the narrow channel, water from the inverted jar automatically replenishes the channel, maintaining a consistent water level. The narrow design of the channel is crucial for the safety of small birds, allowing them to drink without being able to enter the water and risk drowning. This design also minimizes splashing and helps keep the water cleaner by limiting the amount of debris that can enter the drinking area.

Maintenance

Regular cleaning is essential to ensure the health of your birds and the longevity of the waterer base. The heavy-duty polystyrene construction is designed to withstand various conditions, but proper cleaning prevents bacterial growth and accumulation of debris.

• Disassemble the waterer base from the jar daily or as needed.
• Wash both the base and the jar thoroughly with warm, soapy water. Use a brush to remove any algae or debris from the narrow channel.
• Rinse all components completely to remove soap residue.
• Allow parts to air dry or dry with a clean cloth before reassembling and refilling with fresh water.

Troubleshooting

• Water not flowing: Ensure the jar is screwed on tightly and there are no airlocks. Check for any blockages in the water flow openings.
• Leaking: Verify that the waterer base is securely screwed onto the jar and that the seal is intact. Replace the jar or base if cracks are present.
• Water contamination: If water becomes dirty quickly, increase the frequency of cleaning. The narrow channel design helps minimize contamination, but regular maintenance is still required.
• Chicks getting wet/drowning: The narrow channel design is specifically intended to prevent this. Ensure you are using the correct base for small birds. If using a different type of waterer, switch to this narrow-channel design for safety.

Specifications

Warranty and Support

Specific warranty information and direct support contact details are not provided within the product description. For warranty inquiries or technical assistance, please refer to the manufacturer's official website or contact the retailer where the product was purchased.