Highwild Ladder Stand Installation System Treestand Ground Swivel Spikes User Manual

1. Introduction and Product Overview

The Highwild Ladder Stand Installation System Treestand Ground Swivel Spikes are designed to simplify the setup and removal of most ladder stands. This system provides a stable pivot point, making it easier and safer to erect and dismantle your treestand. Constructed from high-quality solid steel, these durable ground swivel pegs are an essential accessory for any treestand user.

Image: Two Highwild Ladder Stand Ground Swivel Spikes, showcasing their robust steel construction and design.

2. Safety Information

Your safety is paramount. Always adhere to the following guidelines:

• Read All Instructions: Before installation or use, thoroughly read and understand this manual and the instructions provided with your specific ladder stand.
• Inspect Equipment: Before each use, inspect the ground swivel spikes and your ladder stand for any signs of wear, damage, or corrosion. Do not use if any components are compromised.
• Stable Ground: Ensure the ground where the spikes are inserted is firm and stable. Avoid soft, loose, or uneven terrain that could compromise stability.
• Proper Installation: Always ensure the spikes are fully and securely inserted into the ground before attempting to raise or lower the ladder stand.
• Use with Caution: Exercise extreme caution when raising or lowering a ladder stand. It is recommended to have assistance during this process.
• Weight Limits: Do not exceed the weight limits specified by your ladder stand manufacturer.
• Personal Protective Equipment: Consider wearing appropriate safety gear, such as gloves, during installation.

Important: These ground swivel spikes are an aid for installation and removal. They do not replace the need to follow all warnings and instructions provided with your ladder stand (purchased separately).

3. Components and Parts List

The Highwild Ladder Stand Installation System includes the following components:

• 2 x Highwild Ground Swivel Pegs (made of high-quality solid steel)

Each peg weighs approximately 2 lbs, with the total package weighing 4 lbs (1.87 kg).

Image: The Highwild Ground Swivel Spikes shown alongside a backpack, illustrating their compact size and portability.

4. Setup and Installation

These ground swivel spikes are designed to be used at the base of your ladder stand to create a stable pivot point during installation or removal. Follow these steps for proper setup:

1. Prepare the Area: Choose a level and stable area for your ladder stand installation. Clear away any debris, rocks, or obstacles from the base area.
2. Position Spikes: Place one ground swivel spike at each of the two front base points of your ladder stand. The flat plate of the spike should be oriented to provide maximum stability against the ground.
3. Insert Spikes: Firmly push or gently tap the spikes into the ground until the flat plate rests securely on the surface. Ensure they are fully seated and stable. If the ground is excessively hard, consider pre-drilling a small pilot hole or selecting a different location.
4. Attach Ladder Stand: Position the base of your ladder stand onto the swivel pegs. The design allows the ladder stand to pivot on these points as you raise it into position against the tree.
5. Raise Ladder Stand: Carefully raise the ladder stand, using the swivel spikes as a pivot. This reduces the effort required to lift and position the stand. Ensure the stand is balanced and controlled throughout the process.
6. Secure Stand: Once the ladder stand is upright and against the tree, secure it according to your ladder stand manufacturer's instructions. The ground swivel spikes are for temporary installation assistance and should not be relied upon for long-term stability once the stand is fully erected and secured to the tree.

Image: The Highwild Ground Swivel Spikes correctly positioned at the base of a ladder stand, demonstrating their role in providing a stable pivot point for installation.

5. Operating Instructions

The primary operation of the Highwild Ground Swivel Spikes is during the raising and lowering of your ladder stand. Once installed as described in Section 4, the swivel mechanism allows for controlled rotation of the ladder stand's base, facilitating easier alignment and positioning against the tree. When lowering the stand, reverse the installation process, using the spikes as a pivot to safely guide the stand back to the ground.

6. Maintenance

To ensure the longevity and continued performance of your Highwild Ground Swivel Spikes, follow these maintenance guidelines:

• Cleaning: After each use, wipe down the spikes to remove dirt, mud, and moisture.
• Inspection: Regularly inspect the steel components for any signs of rust, bending, or structural fatigue.
• Lubrication: Apply a light coat of rust-inhibiting lubricant to the swivel mechanism and any exposed metal parts before long-term storage.
• Storage: Store the spikes in a dry environment to prevent corrosion.

7. Troubleshooting

If you encounter issues with your Highwild Ground Swivel Spikes, consider the following:

• Difficulty Inserting Spikes: If the ground is too hard, try relocating to a softer area. Avoid excessive force or hammering directly on the plate, which can cause bending. A small pilot hole can be drilled in very hard ground if necessary.
• Instability During Pivot: Ensure the spikes are fully inserted and the ground is firm and level. Uneven ground can cause instability.
• Swivel Mechanism Sticking: Clean any dirt or debris from the swivel joint. Apply a penetrating lubricant to free up the movement.

8. Specifications

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact Highwild directly through their official channels or the retailer from whom the product was purchased. You can visit the official Highwild store on Amazon for more information: Highwild Amazon Store.