BSEED WiFi Smart Touch Switch (1 Gang 1 Way) User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your BSEED WiFi Smart Touch Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

Always disconnect power at the circuit breaker before installing or servicing the switch.
Installation should be performed by a qualified electrician or in accordance with local electrical codes.
Do not install with wet hands.
Ensure the switch is installed in a standard wall box with sufficient depth.
This device is designed for indoor use only.
Do not exceed the maximum load capacity of 1000W for inductive/LED loads or 1500W for resistive loads.

3. Package Contents

Verify that all components are present:

BSEED WiFi Smart Touch Switch (1 Gang 1 Way)
Capacitor (for no neutral wire installations)
Mounting Screws
User Manual (this document)

4. Product Overview

The BSEED WiFi Smart Touch Switch offers convenient control of your lighting. It features a sleek touch panel, WiFi connectivity for smart home integration, and compatibility with voice assistants.

Key Features:

Touch Control: Responsive touch panel for manual operation.
Voice Control: Compatible with Amazon Alexa and Google Assistant.
Remote Control: Manage your lights from anywhere using the Smart Life or Tuya app.
Scheduling Function: Set timers to automatically turn lights on/off.
Memory Function: Retains previous state after a power outage.
No Neutral Wire Required: Designed for installations without a neutral wire (requires capacitor).

5. Setup and Installation

Follow these steps carefully for safe and correct installation.

5.1 Wiring Diagram

Refer to the wiring diagram below for connection instructions. This model is designed for installations without a neutral wire, utilizing a capacitor.

Wiring diagram for BSEED WiFi Smart Touch Switch, showing live wire (red) connected to L terminal, light wire connected to L1 terminal, and capacitor connected across the light bulb and L1 terminal. — **Image 1: Wiring Diagram.** This diagram illustrates the connections for the BSEED smart switch. The live wire connects to the 'L' terminal. The light wire connects to the 'L1' terminal. For installations without a neutral wire, a capacitor must be connected across the light bulb and the 'L1' terminal.

Step 1: Turn off power at the circuit breaker before beginning installation.
Step 2: Connect the live wire (phase) to the 'L' terminal on the switch.
Step 3: Connect the light wire (load) to the 'L1' terminal on the switch.
Step 4: For installations without a neutral wire, connect the provided capacitor across the light bulb terminals. This is crucial for proper operation and to prevent flickering.
Step 5: Secure the switch into the wall box using the provided screws. Ensure there is enough space in the wall box for the switch.
Step 6: Reattach the glass panel and restore power at the circuit breaker.

5.2 App Pairing (Smart Life / Tuya)

To enable smart features, pair your switch with the Smart Life or Tuya app.

Step 1: Download the "Smart Life" or "Tuya Smart" app from your smartphone's app store.
Step 2: Register or log in to your account.
Step 3: Ensure your phone is connected to a 2.4GHz Wi-Fi network.
Step 4: Power on the switch. Press and hold the touch panel until the indicator light flashes rapidly (usually 5-10 seconds) to enter pairing mode.
Step 5: In the app, tap "+" to add a device, then select "Lighting" -> "Switch (Wi-Fi)".
Step 6: Follow the on-screen instructions to connect the switch to your Wi-Fi network.
Step 7: Once successfully paired, you can rename the switch and control it via the app.

A person using a smartphone app to control a smart light switch, with a lamp visible in the background. — **Image 2: App Control.** This image shows a user interacting with the smart switch via a mobile application, demonstrating remote control capabilities.

6. Operating Instructions

6.1 Manual Control

Simply touch the designated area on the glass panel to turn the light on or off. Ensure you touch the center of the touch circle for optimal response.

6.2 Remote Control via App

After successful pairing, open the Smart Life or Tuya app. You can turn the light on/off, set schedules, and manage other smart features from anywhere with an internet connection.

A smartphone displaying the Smart Life app interface for controlling smart home devices. — **Image 3: Remote Control.** This image shows the Smart Life app interface on a smartphone, illustrating how users can remotely control their smart switch.

6.3 Voice Control

Integrate your BSEED smart switch with Amazon Alexa or Google Home for hands-free control.

Step 1: Link your Smart Life/Tuya account to Amazon Alexa or Google Home app.
Step 2: Discover devices in the Alexa/Google Home app.
Step 3: Use voice commands such as "Alexa, turn on the living room light" or "Hey Google, turn off the bedroom light."

A smart home control panel with a smartphone and smart speaker, illustrating voice control integration. — **Image 4: Voice Control Setup.** This image depicts a smart home setup with a control panel, smartphone, and smart speaker, demonstrating the integration for voice commands.

6.4 Scheduling and Timers

Use the Smart Life or Tuya app to set schedules for your lights, automating your home and saving energy.

Three people on a couch, each using a digital device, suggesting smart home control and scheduling. — **Image 5: Scheduling Feature.** This image shows individuals using devices, representing the convenience of setting schedules and timers for smart home devices.

7. Maintenance

Clean the glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
Ensure the switch is kept dry and away from excessive moisture.
Regularly check for firmware updates in the Smart Life/Tuya app to ensure optimal performance and security.

8. Troubleshooting

Problem	Possible Cause	Solution
Switch not responding to touch.	Incorrect touch area; dirty panel.	Ensure you are touching the center of the touch circle. Clean the panel.
Light flickering or not turning off completely.	Capacitor not installed or incorrectly installed.	Ensure the capacitor is correctly installed across the light bulb terminals. This is essential for no-neutral wire setups.
Switch disconnects from Wi-Fi frequently.	Weak Wi-Fi signal; router configuration issues (e.g., 5GHz network).	Ensure the switch is within range of your 2.4GHz Wi-Fi network. Check router settings to ensure 2.4GHz is enabled and stable. Try restarting your router.
Cannot pair the switch with the app.	Incorrect pairing mode; 5GHz Wi-Fi network; incorrect Wi-Fi password.	Ensure the switch is in rapid flashing pairing mode. Connect your phone to a 2.4GHz Wi-Fi network. Double-check your Wi-Fi password.
Switch does not fit in the wall box.	Shallow wall box.	Ensure your wall box has sufficient depth for the smart switch. Professional installation may be required to modify the wall box.

9. Specifications

Feature	Detail
Brand	BSEED
Model	MV-EU-LN_L-T1S-C 421011W
Operating Mode	ON-OFF
Operating Voltage	240 Volts
Max Load (Inductive/LED)	1000 W
Max Load (Resistive)	1500 W
Switch Type	Smart Touch Switch
Terminal Type	Screw
Circuit Type	1 Way
Mounting Type	Wall Mount
Control Method	Application, Voice
Connectivity Protocol	Wi-Fi (2.4GHz)
Compatible Devices	Amazon Alexa, Google Home
Smart Home Compatibility	Yes
Color	White
Item Dimensions (L x W x H)	8.6 x 8.6 x 2.5 cm
Material	Plastic, Copper (contact material)
International Protection Rating	IP20
Compliant Specifications	CE, RoHS
Item Weight	176 Grams
Country of Origin	China

10. Warranty and Support

For warranty information and technical support, please refer to the official BSEED website or contact their customer service. Keep your purchase receipt for warranty claims.

Return Policy: The product has a 30-day refund/replacement return policy.

Manufacturer: BSEED

Manufacturer Part Number: SL-GL86TSI11WEU

BSEED MV-EU-LN_L-T1S-C 421011W