Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Luxrite 4 Inch Ultra Thin LED Recessed Light. This product features CCT color selectable options (2700K, 3000K, 3500K, 4000K, 5000K) and dimmable functionality, designed for both indoor and outdoor use. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
WARNING: Risk of fire or electric shock. Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Disconnect power at the circuit breaker before installation or servicing.
- Ensure all electrical connections are made in accordance with local codes and ordinances, and the National Electric Code (NEC).
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- This product is suitable for wet locations and IC (Insulation Contact) rated.
- Use only with 120V AC, 60Hz power supply.
Package Contents
- Luxrite 4 Inch Ultra Thin LED Recessed Light Fixture(s)
- Junction Box(es)
- Wire Nuts (typically included for connections)
Specifications
| Brand | LUXRITE |
| Model Number | LR23756 |
| Size | 4 Inch |
| Wattage | 10 Watts |
| Brightness | 750 Lumens |
| Color Temperature | 2700K, 3000K, 3500K, 4000K, 5000K (Selectable) |
| Dimmable | Yes (100% to 10%) |
| Voltage | 120 Volts |
| Lifetime | 50,000 Hours |
| Certifications | ETL Listed, Energy Star, IC Rated, Wet Location Rated |
| Product Dimensions | 4.7"L x 1.01"W x 4.7"H |
| Material | Metal |
Figure 1: Luxrite 4 Inch LED Recessed Light Dimensions. The light has a diameter of 4.7 inches and a thickness of 1.02 inches, indicating its ultra-thin profile.
Installation (Setup)
Follow these steps for safe and proper installation of your Luxrite LED recessed light. Ensure power is disconnected at the circuit breaker before beginning.
- Prepare the Ceiling: Cut a 4-1/4 inch diameter hole in the ceiling at the desired installation location. Ensure there are no obstructions within the ceiling space.
- Wire the Junction Box: Open the junction box. Connect the electrical supply cable (live, neutral, ground) to the corresponding wires inside the junction box using wire nuts. Ensure all connections are secure.
- Connect Downlight to Junction Box: Connect the cable from the LED downlight fixture to the cable extending from the junction box. This connection is typically a plug-and-play type.
- Insert Junction Box: Carefully push the wired junction box through the cut-out hole into the ceiling.
- Secure Downlight: Push the spring-loaded clips on the sides of the downlight fixture upwards. Insert the downlight into the ceiling hole. The clips will automatically spring back down to secure the fixture flush against the ceiling.
Figure 2: Easy Installation Steps. This diagram visually guides users through cutting the ceiling hole, wiring the junction box, connecting the light, and securing it.
Figure 3: Junction Box and Light Components. This image shows the compact junction box, the connecting cable, spring clips for flush mounting, and the foam gasket for improved sealing.
Operating Instructions
Color Temperature Selection (CCT)
Your Luxrite LED recessed light offers five selectable color temperatures to suit various preferences and room ambiances. The color temperature switch is located on the junction box.
- 2700K Warm White: Provides a cozy, inviting glow, ideal for bedrooms and living areas.
- 3000K Soft White: A slightly brighter, warmer light, suitable for general living spaces.
- 3500K Natural White: A balanced, neutral light, good for kitchens and offices.
- 4000K Cool White: A crisp, energetic light, often used in task-oriented areas like workshops or modern kitchens.
- 5000K Bright White: A very bright, daylight-like light, best for areas requiring high visibility.
To change the color temperature, locate the switch on the side of the junction box and slide it to your desired setting. It is recommended to select the desired color temperature before final installation into the ceiling, or ensure easy access to the junction box if changes are anticipated.
Figure 4: 5 Color Options in various room settings. This image illustrates how different color temperatures can change the ambiance of a space, from warm to bright white.
Figure 5: Ambiance with 2700K and 4000K. This image demonstrates the contrast and effect of warm versus cool lighting in an outdoor setting.
Dimming Function
The Luxrite LED recessed light is dimmable, allowing you to adjust the light output from 100% down to 10%. This feature requires a compatible LED dimmer switch (sold separately). Ensure your dimmer switch is compatible with LED lighting to avoid flickering or performance issues.
Figure 6: Compatible Dimmer List. Refer to this list for recommended dimmer switches to ensure optimal dimming performance.
Product Overview Video
Video 1: Luxrite Ultra Thin LED Light with Color Trim. This video provides a visual overview of the product's features, including its slim design, color temperature selection, and dimming capabilities.
Maintenance
The Luxrite LED recessed light is designed for long-lasting performance with minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- Bulb Replacement: The LED light source is integrated and not user-replaceable. The fixture has a rated lifetime of 50,000 hours.
Troubleshooting
If you experience issues with your Luxrite LED recessed light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty fixture | Check circuit breaker; Verify all wire connections; Test fixture with a known working power source. |
| Light flickers or dims improperly | Incompatible dimmer switch; Loose wiring; Overloaded circuit | Ensure dimmer is LED compatible (refer to Figure 6); Check wiring connections; Reduce load on the circuit. |
| Incorrect color temperature | CCT switch set incorrectly | Access the junction box and adjust the CCT switch to the desired setting. |
| Light turns off unexpectedly | Overheating; Loose connection | Ensure proper airflow around the fixture (though IC rated, extreme heat can affect performance); Check all electrical connections. |
Warranty and Support
This Luxrite LED recessed light is covered by a manufacturer's warranty. For specific warranty terms, duration, or to obtain support, please contact Luxrite customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the official Luxrite website or contact their customer support.
