Product Overview
The FELCO 2 Bypass Pruner and Leather Holster bundle provides a robust and ergonomic solution for various pruning tasks. This F2 Hand Pruner is designed for efficiency and durability, paired with a practical 910 Holster for convenient carrying and protection.
Key features include an easy and durable cutting adjustment, a wire cutting notch, and a sap groove for cleaner operation. Ergonomic design ensures hand protection with a cushion-shock absorber and a non-slip coating, making it suitable for medium to large hands.
Image: Felco 2 Bypass Pruner and its accompanying leather holster.
Setup
Unpacking and Initial Inspection
- Carefully remove the Felco 2 Bypass Pruner and Leather Holster from its packaging.
- Inspect both the pruner and the holster for any signs of damage that may have occurred during shipping.
- Familiarize yourself with the pruner's components, including the blades, handles, locking mechanism, and the cushion-shock absorber.
Holster Usage
- The leather holster (Model 910) is designed for convenient and safe carrying of your pruner.
- Slide the pruner into the holster with the blade facing away from your body.
- Attach the holster to your belt using the integrated loops for easy access during gardening tasks.
Operating Instructions
General Pruning Technique
- Ensure the pruner's locking mechanism is disengaged before use.
- Position the branch to be cut as close to the pivot point of the blades as possible for maximum leverage and a clean cut.
- Apply firm, steady pressure to the handles to make a smooth cut. Avoid twisting or forcing the pruner.
- The Felco 2 is designed to cut branches up to 1 inch in diameter. Do not attempt to cut larger branches as this may damage the tool or cause injury.
Ergonomic Features
- The non-slip coating on the handles provides a secure grip, even in damp conditions.
- The cushion-shock absorber reduces impact on your wrist and hand during repetitive cutting, enhancing comfort and reducing fatigue.
- This model is specifically sized for medium to large hands, providing optimal fit and control.
Specialized Features
- Wire Cutting Notch: Use the designated notch on the blade for cutting small wires without dulling the main cutting edge.
- Sap Groove: The sap groove helps prevent sap and debris from sticking to the blade, ensuring smoother operation and cleaner cuts.
Maintenance
Cleaning
- After each use, especially when cutting sappy wood, clean the blades thoroughly. Use a stiff brush and warm soapy water, or a specialized blade cleaner.
- Pay particular attention to the sap groove to ensure it remains clear.
- Dry the pruner completely to prevent rust.
Sharpening
- The hardened steel blades will retain their sharpness for a long time, but regular sharpening is recommended for optimal performance.
- Use a sharpening stone or diamond file designed for pruning shears. Follow the original bevel angle of the blade.
- Sharpen only the cutting edge, not the bypass blade.
Lubrication
- Periodically apply a light machine oil to the pivot point and spring mechanism to ensure smooth operation and prevent corrosion.
Cutting Adjustment
- The pruner features an easy and durable cutting adjustment. Refer to the detailed instructions provided with your product for precise adjustment procedures to maintain optimal cutting performance.
Holster Care
- The leather holster should be kept clean and dry. If it gets wet, allow it to air dry naturally away from direct heat.
- Periodically treat the leather with a suitable leather conditioner to keep it supple and prevent cracking.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dull or rough cuts | Blades are dull or dirty. | Clean and sharpen the blades. Ensure the cutting adjustment is correct. |
| Handles sticking or stiff operation | Sap or debris build-up, lack of lubrication. | Clean the pruner thoroughly, especially the pivot point and sap groove. Apply lubricant. |
| Pruner not closing properly | Debris obstructing closure, misaligned blades. | Remove any obstructions. Check and adjust the blade alignment if necessary (refer to adjustment instructions). |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact FELCO customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | FELCO |
| Model Number | FELCO2+LEATHERHOLSTER910 |
| Item Weight | 8.5 Ounces |
| Style | Leather Holster |
| Blade Material | Hardened Steel |
| Handle Material | Leather, Metal, Rubber |
| Blade Edge | Serrated (Note: Typically bypass pruners have smooth blades. This specification is as provided.) |
| Blade Type | Bypass (Note: "anvil" was also listed in data, but "Bypass Pruner" is in product title.) |
| Hand Orientation | Ambidextrous |
| Cutting Width | 1 Inches |
| UPC | 698035161973 |
| Package Dimensions | 11.93 x 4.06 x 2.17 inches |
Warranty Information
Specific warranty details for the Felco 2 Bypass Pruner and Leather Holster are typically provided with the product packaging or can be found on the official FELCO website. Please retain your proof of purchase for any warranty claims.
Support
For further assistance, technical support, or inquiries regarding your Felco 2 Bypass Pruner and Leather Holster, please visit the official FELCO website or contact their customer service department directly. Contact information can usually be found on the product packaging or the manufacturer's website.
You can also visit the FELCO Store on Amazon for more information and products.
