1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Kuzco Lighting FM1512-WH Malta Flush Mount LED Ceiling Light. Please read this manual thoroughly before proceeding with installation or use, and retain it for future reference. This fixture is designed for indoor use only.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK
- Always turn off the main power supply at the circuit breaker or fuse box before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process or electrical wiring.
- Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electrical Code (NEC).
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Handle the fixture with care to prevent damage to the glass or electrical components.
- This fixture is designed for 120V AC power supply.
3. Package Contents
Verify that all components are present and undamaged before installation. If any parts are missing or damaged, do not proceed with installation and contact Kuzco Lighting customer support.
- Malta Flush Mount LED Fixture (1 unit)
- Mounting Hardware (screws, wire nuts, etc.)
- Instruction Manual
4. Setup and Installation
Follow these steps carefully for proper installation. Professional installation is recommended if you are not familiar with electrical wiring.
- Turn Off Power: Locate the circuit breaker controlling the light fixture location and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting Surface: Ensure the junction box is securely mounted and capable of supporting the fixture's weight (approximately 3.3 lbs).
- Connect Wiring: Carefully connect the fixture's wires to the corresponding wires from the junction box. Typically, connect the black wire from the fixture to the black (hot) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the green or bare copper wire from the fixture to the green or bare copper (ground) wire from the junction box. Secure connections with wire nuts.
- Mount Fixture: Align the fixture base with the mounting holes on the junction box. Secure the fixture to the junction box using the provided mounting screws. Ensure the fixture is flush against the ceiling.
- Restore Power: Once the fixture is securely mounted and all connections are checked, restore power at the circuit breaker.
Figure 1: Front view of the Kuzco Lighting FM1512-WH Malta Flush Mount LED fixture, showcasing its white finish and integrated LED panel.
Figure 2: The Kuzco Lighting FM1512-WH Malta Flush Mount LED fixture installed on a ceiling in a modern kitchen setting, demonstrating its low-profile design.
5. Operating Instructions
The Kuzco Lighting FM1512-WH Malta fixture is designed for simple operation.
- Power On/Off: Use a standard wall switch to turn the fixture on or off.
- Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed. The fixture can also be controlled via a remote control (if included or purchased separately). Refer to your dimmer switch or remote control manual for specific operating instructions.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your LED fixture.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LED Module: The LED light source is integrated and not user-replaceable. Do not attempt to open or replace the LED module.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Troubleshooting
If you encounter issues with your fixture, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up | No power to the fixture Loose wiring connection Faulty wall switch | Check circuit breaker and wall switch. Turn off power and check wire connections. Test wall switch with another device or replace if faulty. |
| Light flickers or dims inconsistently | Incompatible dimmer switch Loose wiring connection | Ensure dimmer switch is compatible with LED fixtures. Turn off power and check wire connections. |
| Light output is too low | Dimmer setting is too low | Adjust dimmer to a higher setting. |
If these steps do not resolve the issue, contact Kuzco Lighting customer support or a qualified electrician.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Kuzco Lighting |
| Model Number | FM1512-WH |
| Style | Contemporary |
| Color | White |
| Material | Alloy Steel, Glass |
| Light Fixture Form | Ceiling, Flush Mount |
| Product Dimensions | 12"L x 12"W x 3.12"H |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Light Source Type | Integrated LED Bulb (AC Module) |
| Light Output | 900 Lumens |
| Color Temperature | 3000 Kelvin |
| Special Feature | Dimmable |
| Control Method | Remote (compatible) |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 3.3 Pounds |
| Efficiency | Energy-efficient |
| Certification | ETL Listed |
9. Warranty and Support
This Kuzco Lighting FM1512-WH Malta Flush Mount LED fixture comes with a manufacturer's warranty of 5 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Kuzco Lighting customer service directly. Keep your proof of purchase for warranty validation.
Kuzco Lighting Contact Information:
Please refer to the official Kuzco Lighting website or product packaging for the most current contact details.
