1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Geberit Wall-Mounted Toilet ONE, Model 500.201.01.1. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Image 1.1: Front view of the Geberit Wall-Mounted Toilet ONE. This image shows the complete toilet unit with its white ceramic bowl and matching WC seat.
2. Safety Information
- Installation should only be performed by qualified personnel in accordance with local plumbing and building codes.
- Ensure all water supply lines are shut off before beginning installation.
- Wear appropriate personal protective equipment (e.g., gloves, eye protection) during installation.
- Handle ceramic components with care to prevent chipping or breakage.
- Do not use abrasive cleaners or harsh chemicals on the toilet surface or seat, as this may damage the finish.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation:
- Geberit Wall-Mounted Toilet ONE (Ceramic bowl, white)
- WC Seat (White, plastic)
- Fixing material for WC seat
- Acoustic connection set
4. Setup and Installation
The Geberit Wall-Mounted Toilet ONE is designed for wall-mounted installation. This requires a suitable pre-wall installation system (not included) to support the toilet and conceal the cistern.
4.1. Pre-Installation Checks
- Ensure the pre-wall installation frame is securely mounted and level.
- Verify that water supply and waste connections are correctly positioned and accessible.
4.2. Toilet Bowl Installation
- Connect the waste pipe and water supply hose to the toilet bowl.
- Mount the toilet bowl onto the threaded rods of the pre-wall frame. The easy fixation system with optimized power transmission ensures a secure and stable attachment.
- Tighten the fixing nuts evenly until the toilet is firmly secured against the wall, ensuring not to overtighten.
4.3. WC Seat Installation
The WC seat is designed for tool-free installation and removal, facilitating cleaning and maintenance.
- Align the seat hinges with the mounting holes on the toilet bowl.
- Press the seat firmly onto the mounting posts until it clicks into place.
- To remove the seat, simply press the release buttons (if present) or pull upwards firmly, depending on the specific hinge mechanism.
Image 4.1: Front dimension view of the Geberit Wall-Mounted Toilet ONE. This technical drawing illustrates the front profile with key measurements, including a width of 37 cm and a mounting distance of 18 cm for the seat.
Image 4.2: Side dimension view of the Geberit Wall-Mounted Toilet ONE. This drawing shows the side profile with measurements, indicating a projection of 54 cm from the wall and a total height of 34.3 cm for the ceramic bowl.
Image 4.3: Top dimension view of the WC seat for the Geberit Wall-Mounted Toilet ONE. This diagram provides the top-down view of the seat, showing its overall length of 46.5 cm.
5. Operating Instructions
The Geberit Wall-Mounted Toilet ONE operates like a standard flush toilet. After use, activate the flush mechanism, typically located on the wall-mounted flush plate (not included with the toilet bowl), to clear the bowl.
6. Maintenance
6.1. Cleaning the Toilet Bowl
- Regularly clean the ceramic bowl with a mild, non-abrasive bathroom cleaner and a soft cloth or sponge.
- For stubborn stains, use a toilet brush with a suitable toilet bowl cleaner, following the cleaner's instructions.
- Rinse thoroughly with water after cleaning.
6.2. Cleaning the WC Seat
- The WC seat can be easily removed without tools for thorough cleaning.
- Clean the seat and hinges with a mild soap solution and a soft cloth.
- Avoid using abrasive cleaners, scouring pads, or strong chemical agents, as these can damage the plastic surface.
- Ensure the seat is dry before reattaching.
7. Troubleshooting
This section addresses common issues you might encounter with your toilet.
- Weak Flush: Check the water supply valve to ensure it is fully open. If the issue persists, consult a plumber as it may relate to the concealed cistern or water pressure.
- Leaking: If water is leaking from around the base of the toilet, immediately shut off the water supply and contact a qualified plumber. This could indicate an improper seal or a crack in the ceramic.
- Clogging: Use a plunger to clear minor clogs. Avoid flushing non-biodegradable items. For persistent or severe clogs, professional plumbing assistance is recommended.
- Loose WC Seat: If the WC seat becomes loose, ensure it is correctly re-seated on its mounting posts. The tool-free removal and re-attachment feature allows for easy adjustment.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Geberit |
| Model Number | 500.201.01.1 |
| Product Dimensions (L x W x H) | 54 x 37 x 34.3 cm |
| Item Weight | 30.25 kg |
| Color | White |
| Toilet Material | Ceramic |
| WC Seat Material | Plastic |
| Installation Type | Wall-mounted |
| Shape | Round |
| Special Features | Removable WC seat |
| International Article Code (EAN) | 04025416301653 |
9. Warranty and Support
For information regarding warranty coverage, spare parts availability, or technical support, please refer to the official Geberit website or contact your local Geberit dealer. Keep your proof of purchase for any warranty claims.
